Swapping video files of different sizes

Similar Questions

• How to compress a lot of pdf files in different sizes for a specific purpose (20 MB)

  Hello

  How to compress a lot of pdf files in different sizes (21-39 MB) to a target specific (20 MB)?

  Thanks :)

  Of endless trial and error.

• HD video files jump in size to the publication in the 13 pre. How to avoid?

  Hello everyone, I'm using the Dutch version of the pre 13. Thus, some names of menu/button will be Dutch. I hope that you will find what they would look like in the English edition.

  I built a little project autour. Video MTS files, downloaded from a camcorder. Video, AVCHD 1920x1080i, 25 fps, approximately 17000 Kbps.

  I made a few simple changes: change the points of entry and exit in fasteners to remove the bad images. There was 1 min 52 sec of video I want to publish it on computer. You select MPEG, there are two options that produce MPEG2 files: "MPEG2, 1920x1080i 25", who need MB (!) 344 and 'Hoge kwaliteit, HDTV 1080i 25 ", who need 210 MB. File MPEG2 times do not play in Windows Media Player, producing its only (video and audio have been verified at the time of publication). What's wrong?

  To be honest, I expected that PrE could suggest me to produce with a codec H264 MPEG4 files. Under the AVCHD, there is the option "MP4 - H264 1920 x 1080p 25 (p)(, non pas moi).» It uses "Bestandstype" H.264 and will produce a file of 439 MB (!). The size does not change when I select the settings are the same as those of the video imported under the "Advanced" button... ». I find it surprising that 1 m 52 takes so much Mo. The original size it takes about 100 MB/min of video. Codec is not optimal?

  If the problem persists, it will be impossible to create a DVD disc or Blu - ray containing an acceptable length of the video.

  I'm looking forward for advice. Thanks in advance.

  Wouter

  wk59

  Of your particular source

  bitrate can be expressed

  17000 kbps (kilobits per second)

  16.6 Mbps (megabits per second)

  2.1 Mbps (megabytes per second)

  If you want to spend time of seconds to minutes for your clip 1 minutes and 52 seconds (112) with this bitrate, you might estimate a size of file with this AVCHD like 126 MB compression.

  If you take 1 minute and 52 seconds timeline export to a file

  Publish + share

  Computer

  MPEG

  with Presets = MPEG2 1920 x 1080i25

  you work with other than AVCHD compression and the default bit rates are higher for the parameters of flow (Minimum 18, target 25 Mbps and Maximum 30 Mbps). Have you tried adjust default bitrate with a bitrate of the original film?

  If you take 1 minute and 52 seconds timeline export to a file

  Publish + share

  Computer

  MPEG

  with Presets = HD TV 1080i25

  work with other than AVCHD compression and the default bit rates are lower than those of MPEG2 1920 x 1080i25 (Minimum 4 Mbps, target 15 and 18.5 Mbps Maximum.) These parameters should give you a closer at the source file size before you customize the bitrate.

  But I don't see anything special about this situation - given a bitrate of the source that is exported by using the export settings baud rate. Are adjust you the bitrate export settings under the Advanced tab of button/video? You take into consideration your choice of video compression and bitrate settings?

  When using Publish + share/computer/MPEG, your video compression will be MPEG2 (with extension of file m2t or mi/gal). If you are looking for video compression H.264, which can be found under publish + share/computer/QuickTime as H.264.mov. Also, check out post + computer part, AVCHD to H.264.mp4 and H.264.m2t. But, find rates under the Advanced button of the preset. You do not have to use the default values for Adobe, but rather your own compromise between the bitrate, the quality and the size of the file on the settings tab advanced video button of the preset.

  Reading the MPEG2.m2t and MPEG2.mpg is discussed in the next post.

  RTA

• Illustrator file generating PDF files to different sizes

  I have a comic book divided in two files have. Each file is a work plan, each page of these files is a layer.

  The two files have been set up the same, and my settings "save under" are the same. When I save pages in PDF file Ai 1, they save to twice the size of PDFs from Ai 2 file.

  Is it possible to identify what is causing the difference?

  Thank you, all the reviews were correct and helpful!

  Even if I was saving in PDF and uncheck all the extras that cause a larger file, I decreased the size of the files by the trashing of all other pages/layers to save each separately.

  Thanks a lot for all your notes and worry. I hope that these will help someone else in the future also.

• AVI video files play sound but no video in Windows Media Player 7

  My video files avi play sound but no video in Windows Media Player 7. Video files avi are since 2002 and has played very well until I'm a new PC with Windows 7 so I know that the files are not corrupt. All my other files and videos play fine in Media Player. I checked online and seen the posts in other forums on the codecs being the problem. Does anyone know how to fix this? Based on the other forums I found it seems that it is not uncommon that a problem with Win7.

  Also, is it possible to convert audio and video files in different formats with Media Player? Or do I need any other software to do this?

  My video files avi play sound but no video in Windows Media Player 7. Video files avi are since 2002 and has played very well until I'm a new PC with Windows 7 so I know that the files are not corrupt. All my other files and videos play fine in Media Player. I checked online and seen the posts in other forums on the codecs being the problem. Does anyone know how to fix this? Based on the other forums I found it seems that it is not uncommon that a problem with Win7.

  Also, is it possible to convert audio and video files in different formats with Media Player? Or do I need any other software to do this?

  It is not that there is a problem in Windows 7, it is more likely that you don't have just the installed CODEC the video file is saved with.  You will need to find a source, download and install any CODEC no MS yourself. You can use GSpot to identify CODECs used in AVI files. An alternative to downloading of many individual CODECs is to install FFDSHOW instead. Some media players like VLC and Media Player Classic also have internal CODECS and support for a wide variety of video and audio file types.

  http://www.headbands.com/GSpot/

  http://ffdshow-tryout.sourceforge.NET/

• Windows Media Player 12 and offset audio/video problem on most video files (.avi, .mkv)

  Hello

  This is the first time that I have a problem playing with windows media player 12.
  2 days I'm having this problem, most of the video files playback (IE great movies) are unstable and the video drags too and is only scratching sound coming from the speaker, while these files work fine on VLC, Real Player and WMC.
  Whatever the source of the files on hard drive or an external source, it just does not play it correctly how which he used to play everything.
  In addition, MP3 and other video files smaller in size are seem to be working on it.
  I would be very happy for your help!
  Concerning

  Hello
  1 did you change on your computer before this problem?
  You can follow the suggestions and then check.

  Method 1
  You can run the troubleshooting of Windows Media Player settings
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2
  You can update the latest codecs and then check.
  NOTE: WARNING OF THIRD PARTY SOFTWARE
  

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. :
  

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

   
  See also:
  Play an audio or video file
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file
  Play an audio or video file: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions
  Tips for fixing in common of the problems of its http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• Video and image from same source, different size

  Hello world

  I took some pictures and a few videos today with an EOS650D as well to create a film in stop motion.

  I created a sequence based on the video files and added pictures. While the videos fill the full framework, images appear with a border to the left and to the right.

  How are the videos and images in a different size? What I did wrong or that you can do to fix this?

  Thank you very much!

  The images have a resolution different then video

  Video is usually 16:9 while the photos are of 3:2.

  Check the height and width of the two.

  FIX: the scale of the images upward (effect controls/movement)

• Can I associate a video file with an edition on two different machines?

  So, I am doing a project in collaboration with someone in the first, and I put my edit in synch creative cloud file so that we could both on the same project.    It was working fine until we have worked with some of the raw images of 15 GB in size.  There is no room also put it in the cloud, so I had to put in a different folder.    The problem is, give the file a address of link that includes the structure of files on my computer.   Even if I put the file in the same folder on his computer, you must always connect manually whenever it is saved on another computer, Yes?

  So the question is: is there a way I can set it up so that the video file is in a folder 'content' on both computers, such as first on the two systems can understand this is the same file?

  Thanks in advance!

  Even if the containing folder is identical, the full path to the file must also be identical. So, for example, D:\Tom\Projects\Footage is different than F:\Joe\Projects\Footage for the two letter and the user of the drive name.

  If the paths are identical, then Pr will connect to media automatically.

  See you soon,.

  Jeff

• Recorded video file size zero

  Hello

  I am trying to record a video file, based on the documentation

  http://docs.BlackBerry.com/en/developers/deliverables/17968/Record_video_to_a_file_in_a_BB_device_ap...

  But the video file saved shows the size of 0 KB.

  Thank you

  Dembélé George Jacob

  I've corrected this problem someone at - it need to reference please check

  http://supportforums.BlackBerry.com/T5/Java-development/BlackBerry-recording-video-saves-file-of-0KB...

• How I've spread my video into several parts and save each file under different names?

  How I've spread my video into several parts and save each file under different names?

  You are going to need a video editing package to do this, you can not cut just to the top of the video into segments at the file level.

  With an editor, you can then crop the video into segments

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different with different

  Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?

  Located in and out on a section and that export brands.

  .. .Rinse and repeat for the other section.

  Name each section and where it is exported to separately... and as you wish

• the audio/video file size

  Dear all,

  I've never worked with before DPS and wonder if there is a maximum size (MB) or the time limit (minutes) imposed on the audio or video files that are included in a publication of DPS.  Is it possible to add a file audio in a publication of DPS who could be listened to like a book audio or is the content of the application itself is too small to contain such a large audio file?  The same question relates to the addition of a video file.  In other words, file size limits are imposed on the DPS apps?  Thank you.  It is difficult to get a lot of specific information on the DPS Web site.  Thank you. 

  There is no explicit, however video file size limit (in particular) and audio files are the only cause of Folio large files. Rather than include directly the video/audio to the folio, you're better off streaming it.

  Note that the use of DPS to reproduce an audio book won't really work although you disseminate or integrate the audio.

  Neil

• Size of the video file in Encore

  I use Encore CS4.  I created a project with several HD video files and a menu to choose which video to watch.  Video files are already transcoded from the initial project of Pr Pro and are in H.264 format.  Tab still project the size of one of the videos is correctly classified 3GB, but tab in calendar, the code says size 1.58 GB.  Why?  This means - he intends to reduce to a lower definition video?

  You are in the "Edit quality Presets" window. FYI, in CS6 (probably in CS5 too), they are identified as such upwards rather than "export settings". See a second question after screenshots.

  The problem is that this window defines a preset. It allows to change the basic settings and then save them with your own name. BUT the screening is not applied to your assets until you take it in the window "transcoding settings."

  The following image, the "custom of Stan" is a "Preset" I did in the "Export settings" window [CS4] (called "Edit quality Presets" windows in CS6). In the4 drop-down list, you can see that "Automatic" is applied. I can change this by selecting custom or any other option in this list.

  

  To check the option that is applied, without going into this window, just look at the setting of transcoding in the project Panel.

  

  Second question: in your screenshot, the size of the source indicates that 720 X 480. I don't think that's what you want. This means that the assets that you apply the parameter HD probably isn't, you just took that one to display the parameters, but if this is the actual source file, it's a problem.

• Make my MXF project format MXF spews on more than 25 copies of the same file: different sizes?

  When making my MXF project format MXF spews on a ton of makes MXF the same file: different sizes?

  The reason I want to make an another MXF is in the first place, because when I go directly to the project with all the various effects, Magic Bullet Looks, etc, etc.

  in another format, there are always problems.

  Therefore, I have not choice but to descend a generation to gather footage and made an exact copy of what is in the project to the MXF format before I make an MPEG or a H.264.

  The size of my project is more than 100 GB...

  In any case, my most likely choice is to go with the file with most gigabytes. As I say... He spits the different sizes.

  Is there a way to stop the rendering to spit on a ton of MXF files and streamline all in MXF format?

  I searched and searched the Internet for the answer and have checked the forums without success.

  The other thing that concerns me is that a project of more than 100 gigabytes becomes a 3.4 GB file to a 97-minute film. (It also makes a MXF to 1.5 Gig size. Everything is exactly the same thing on this record as far as I know, the rendering of Gigabyte 3.4) that she return 25 to 3.4 GB MXF files. (It's also take up a ton of space on my drive hard whenever I visit)

  It doesn't seem wise because when I visited about 8 minutes from the beginning of the film, he made a 2.9 Gigabyte file contrast with Gigbyte 3.4 file for the entire film.

  Somehow, I think that I can get the same quality when rendering the entire production.

  In addition, it takes more than 5 hours to make a MXF and I feel if it was just on 1 file, such as difference in more than 25 of the exact same rendering MXF files, rendering time would be faster and more efficient.

  Any help or explanations would be appreciated...

  Thank you

  James

  P.S. I deleted a whole bunch of MXF files to make, believeing that they were all duplicates. Of course, they were not, because the one I saved, I put in first to check and it displays only one segment of the film. Therefore, I think that all of the MXF should be connected and when you transfer one in, full MXF is displayed, however... If you delete everything except a MXF thought they are all duplicates, you only this segment of production. Seems to work quite the way to crazy? lol that sounds too wise in what concerns the gigabytes. However, first give the properties for that 1 file that you are importing, even if it is connected to all the other files. Projects likely to be total MXF gigabytes. Because I deleted all the files except one, I'm re - make everything. I'll let him place in case someone else runs into the same situation, I am sure someone will... lol

  the effects were interfering with a good record.

  It's probably not the right explanation.  Many export (which is different a rendering, take note of that) their projects directly from the sequence, effects and everything and get perfectly workable results.  In fact, I would say more that everybody does things like that.  I use MB effects for years, and yes it's hard reading.  But export always out just fine even on my system of $800.

  While your exports come out wobbly, it would probably be to fix it the problem to be solved.  But I would probably start looking for somewhere other than the effects.  Only those should not create the issue you described.