Switch of the battery with etherchannel configuration

Similar Questions

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• Priv of Smartphones BlackBerry blackBerry don't will not load. The battery with white exclamation point icon! point

  Update: it was not after all water damage.  The day I splashed it I also sink it terribly low on battery.  Here's how I diagnosed and brought it back:

  1 held the power and volume for 16 seconds until what the phone into bootloader mode.  Choose the first option to continue the initialization of the phone.

  2 opportunity expert virtual Blackberry to test all functions of the phone.  Everything worked.

  3. went to settings-> battery.  0% battery does not charge.

  4 powered off phone

  5. "battery charged" the phone:

  1. connect to the most powerful USB charger that you have (for me, 3 amps)

  2. as soon as the battery with white exclamation point icon appears, unplug the phone

  3 phone plug back in.  When the battery icon appears unplug.  Repeat 20 - 30 times

  6. Finally, the phone will start just showing the Red instead of the battery icon.  At this point, that the costs of phone for at least an hour.  The status indicator turns yellow

  7 turn on the phone and load completely

  I learned about the "battery charge" of the old Playbooks Blackberry.  Apparently, the voltage of the battery may get so low that the BIOS of the phone which will detect and not to load.  But during the 10 seconds or so to detect, the battery will be a slight amount of charge.  If you keep pushing a little fresh this way over and over, finally he could get enough power to be larger than the minimum voltage and start loading.

  Good luck to everyone who has this problem.

  ---------------------

  Does anyone know a provider for private blackberry battery? My phone got damaged (by a very small amount of water, not overwhelmed), water and is now show white battery icon with exclamation point and do not start.  I would try replacing the battery to see if it is the problem or if the load circuit. (Yes, I know that this isn't * technique * replaceable by the user, but I have the backcover and can do).  BlackBerry support said they don't sell them and wants to $275 + to fix the device, which is almost the cost of a new private on Ebay. Someone know a provider or have a spare battery that I can buy?

  Thank you

  -Lester

  Edition of the above to reflect the real problem.  The battery is just incredibly low.  Come to think of it, I'd run it for about 2 days and what I thought was caused water damage was just a super low battery. I "battery charge" it.  My discription full of how I did which is updated above in the first post.

• Satellite U940 - decrease in the life of the battery with Windows update 8.1

  Hi, before the upgrade to windows 8.1 would usually get about 4 to 5 hours of battery use. However, after the update to windows 8.1 which significantly reduced to about 1.5 to 2 hours to do the same exact things without any change. I contacted toshiba who provided me with a spare battery, but this issue has not changed. I followed to the letter on the 8.1 update following the instructions.

  I'm not really good with computers, but any help would be greatly appreciated.

  Thank you

  It is not easy to say what the problem is here. In front of me, I have U940-103 with Win8.1.
  Three weeks ago I ve updated original Win8 preinstalled with Win8.1 and after battery test I didn t notice any difference.
  With full battery, I can watch two movies without problems so with full battery, I can use my U940 Satellite 4 hours.

  It is not easy to tell if the reason for the low capacity of the battery is Win8.1.
  I don't know if you want to do this, but it will be interesting to know if something will change if you reinstall original recovery image.

• BlackBerry 8800 Smartphone, symbol of the battery with a red line through it. Does not start. Help, please!

  I recently bought a 8800 and when I inserted a battery, I got was a battery symbol with a red line through it, on a dark screen.  I changed the batteries, tried to charge it via the USB port and a wall outlet without result.  I tried cleaning the contacts and tried to download t a new OS, but it does not recognize the phone when it is in reality.    I am at the end of my rope with this phone and can't figure out what else to do.  It is just gone? Please help me

  Clipboard?

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  It might not work. You should try a connection with JLCmder 20 to 25 times, as well with the battery and the battery.

  See what's happening.

• Where is the battery with ios 10 widget?

  I upgraded my Pro iPad to the latest iOS and I can't find the battery widget in the notifications, to let me know how much battery life, I have left in my pencil to apple. Where at - it go?

  It is still where it always was, but it will appear only if a compatible device is actively involved at the time. So be sure that your pencil is actively involved and then swipe from left to right on the home screen to view the display of the widget. If it does not show, press "Edit" and make sure that this option is selected.

• What happens if I remove the battery with the power adapter on Satellite Pro L

  What happens if I remove the battery when I use my laptop directly on the AC adapter / CC?

  Thank you

  Hello

  If the laptop is ON it s not advised to remove the battery.
  You can remove the battery while the laptop is OFF.
  Remove the battery, connect the AC adapter and turn on the laptop

  Good bye

• Satellite A30 switch of the battery, while the AC is plugged

  I've had my A30 for 3 years now, but recently it has begun to move to the power of the battery while it is still plugged into current alternative. Does anyone else have this problem?

  Hello

  In my opinion, there are two possibilities:
  First the adapter has a fault or cable is broken and there is sometimes power fluctuations.
  The second possibility could be bad connection between AC and power plug on the laptop or between the power supply and the motherboard.

  However, I don't think you have enough experience to solve alone. I recommend you contact the ASP in your country for the control of the laptop.

• What is the problem with this configuration?

  We are a small primary school with a T1 connection to supported 70%, continues. (23 k $ per year). We have a Cisco 26xx connect us to the ISP (Verizon). On our initial Setup, we were very happy until we discovered by outside. The 'outsiders' use our proxy server selection to access the Internet (they are on 218.x.x.x & 127.x.x.x PRC). I'm now trying to set up an ACL to prevent traffic. Whenever I have the attached config file TFTP, I can't access the Internet from any of my servers. I've been at this for parts of three days and desperately need help. Here is my file config with remarks and addresses disguised. Help, please. Tom

  !

  version 12.0

  horodateurs service debug uptime

  Log service timestamps uptime

  no password encryption service

  !

  host name (not the real one)

  !

  enable secret xxxxxxxxxxxx

  activate the xxxxxxxxx password!

  !

  IP subnet zero

  No finger service

  no ip source route

  no service tcp-small-servers

  no service udp-small-servers

  !

  name of the IP-server 141.154.0.68

  name of the IP-server 141.155.0.68

  !

  !

  interface Serial0/0

  Point to point description (City)

  bandwidth 1544

  IP address xxx.xxx.xxx.xxx 255.255.255.xxx

  IP access-group assigned in

  IP access-group out filterout

  Disable NTP

  No snmp

  no ip directed broadcast to the

  no ip redirection

  no ip unreachable

  No cdp enable

  no ip mroute-cache

  NAT outside IP

  !

  !

  interface FastEthernet0/0

  the IP 192.168.0.1 255.255.255.0

  no ip directed broadcast to the

  IP nat inside

  automatic duplex

  automatic speed

  !

  NOTE we are attributed x.x.x.33 usable ip addresses to x.x.x.62

  !

  xxx.xxx.xxx.34 xxx.xxx.xxx.50 mask 255.255.255.224 IP nat pool BAIS

  IP nat inside source list 1 BAIS pool overload

  IP nat inside source static 192.168.0.1 xxx.xxx.xxx.33

  IP nat inside source static 192.168.0.18 xxx.xxx.xxx.51

  NOTE x.x.x.51 is our weather station

  IP nat inside source 192.168.0.16 static xxx.xxx.xxx.52

  NOTE x.x.x.52 is our Web server

  IP nat inside source 192.168.0.13 static xxx.xxx.xxx.53

  NOTE x.x.x.53 is a guarded outside HP switch

  IP classless

  IP route 0.0.0.0 0.0.0.0 64.223.133.141

  no ip address of the http server

  !

  !

  assigned extended IP access list

  deny ip 190.190.190.0 0.0.0.255 any

  deny ip 10.0.0.0 0.255.255.255 everything

  deny ip 127.0.0.0 0.255.255.255 everything

  deny ip 192.168.0.0 0.0.255.255 everything

  refuse the 224.0.0.0 ip 15.255.255.255 all

  refuse the host ip 0.0.0.0 everything

  allowed any EQ xxx.xxx.xxx.52 0.0.0.0 tcp 80

  permit tcp any eq xxx.xxx.xxx.51 0.0.0.0 95

  !

  filterout extended IP access list

  allowed packets tcp any any eq ftp reflect

  permit tcp any any eq 22 reflect packages

  allowed packets tcp any any eq telnet reflect

  permit tcp any any eq smtp reflect packages

  permit tcp any any eq field reflect packages

  allowed packets tcp any any eq www reflect

  permit tcp any any eq pop3 reflect packages

  permit tcp any any eq nntp reflect packages

  permit tcp reflect any any eq 143 packages

  permit tcp any any eq 443 reflect packages

  permit udp any any eq field reflect packages

  allow icmp all a package-too-big

  !

  Server SNMP engineID local 000000080797351283

  badwav SNMP - Server RO 91 community

  !

  Line con 0

  exec-timeout 2 30

  transport of entry no

  line to 0

  exec-timeout 2 30

  password (false)

  selection

  opening of session

  modem to dial

  transport of entry all

  autohangup

  line vty 0 4

  exec-timeout 2 30

  password (false)

  opening of session

  !

  end

  Reflexive access lists are always used with key words reflect and evaluate.

  Your Setup seems to be missing the later. Please add the 2 evaluate the commands:

  assess the packages

  evaluate the packet too big

  Please see below where to add and the way in which the final configuration should look like.

  !

  assigned extended IP access list

  deny ip 190.190.190.0 0.0.0.255 any

  deny ip 10.0.0.0 0.255.255.255 everything

  deny ip 127.0.0.0 0.255.255.255 everything

  deny ip 192.168.0.0 0.0.255.255 everything

  refuse the 224.0.0.0 ip 15.255.255.255 all

  refuse the host ip 0.0.0.0 everything

  allowed any EQ xxx.xxx.xxx.52 0.0.0.0 tcp 80

  permit tcp any eq xxx.xxx.xxx.51 0.0.0.0 95

  assess the packages

  evaluate the packet too big

  !

  Please let me know if you still have problems. Hope that helps.

  Vik

• Satellite 5205-S505 - how to remove the battery with the damaged battery latch?

  I try to set aside my laptop (satellite 5205-s505) today. But I found that the release latch was damaged somehow. What can I do?

  My seriously damaged lcd. I have method to close the LCD to save energy (just use external moniter)?

  This battery is a very good question. I think you're the first person who asked it.
  If you cannot remove the only way is, I think, to disassemble the entire laptop and somehow free battery.

  When you use the external monitor, you have to use the FN + F5 key combination and switch to an external monitor only. Portable computer's LCD will be OFF.
  You can also check the Advanced display settings. Usually, you can also find settings to define where should be the office.
  Check it out!

• Switch to the SSD with original recovery software?

  Hello

  I need help in the transition to an SSD. I just bought a desktop PC HP ENVY of h8-1400ew with Windows 8. I'm used to having a system SSD drive, so I would like to switch to him, but keep all the customizations of HP. Actually I'm thinkng to use the original recovery DVD or a partition, but after some research, it seems that during all the years moving to a disk different HARD was almost impossible if the size was smaller. I found someone to go into more detail on these forums and there was a light at the end of the tunnel, he said that the recovery software is able to do this, even if the new drive is smaller, as long as all hidden and recovery partitions mount the new drive. All this should therefore boild down to its size. What size is big enough.

  If anyone has found it's true? HP brought no changes to how it's all done in era of Windows 8? I don't want to shell out $200 to only get the error at the end of the process. Please notify.

  PS. I know there is a workaround solution that involves the cloning of the partition on the drive up, but I don't want to do because it will prevent the correct recovery in the fututre system will be ignore where the scores of recovery are and so on. For now, I would like an automated solution.

  Hello:

  You can see this post where a person has been unable to use a flash drive with the recovery of files on it to install from a HARD drive on a SSD from 120 GB to 500 GB related.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/swapping-HDD-with-SSD-using-HP-recovery-media-for-new-laptop/m-p/2319793#M15213

• Question of blackBerry Smartphones on the switch of the device with BDM

  Assuming you can use this to switch from a BB to a newer device (upgrade), which does everything, he move?  Tasks?  Appointment?  Contacts?

  It moves your applications on the new device?

  References to the ringtones, photos and videos from the media card so it will recognize their presence when he flies over to new device?

  Yes. Yes and Yes. All that stuff is moved and more. Switch device Wizard is good so far.

  And, when you media just what is on the media card card moves with the media card.

• GC installation fails on the WHO with NodeManager Configuration step

  I try to install OEM Grid Control and I'm having some trouble to make it past step in the installation of the Configuration of the WHO. I'm not very familiar with Oracle products. I finished all the configuration steps listed in the documentation, and in order to solve a problem earlier, I deleted the Keynectis and Telesec certificates since the cacerts file java keystore. NodeManager is run as a service, even if I think that the Setup process starts a new instance because it cannot connect to the service. I was also unable to connect to the service through the nmConnect WLST function, if it is possible my settings are incorrect. If the only problem is that GCDomain is not saved in the file nodemanager.domains, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:
  
  ---
  #Domains and directories created by the Configuration Wizard
  #Fri 22 April 15:23:16 EDT 2011
  wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
  MEDREC-Spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-Spring
  GCDomain = C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
  MEDREC=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
  ---
  Note: the file paths are correct and using escaped slashes, as appropriate, but this message board system turns the last double backslash in a line break. I can't find any html solution that works, so just take my word for it
  
  I restarted NodeManager after making the change as well. Any help would be appreciated. Thank you.
  
  Details:
  Machine - Windows Server 2008 x 64
  DB - 11 GR 2
  WLS - 10.3.2
  GC - 11.1.0.1
  
  Install the Log:
  ...
  FINE: Connection to the node Manager... April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Cannot connect to NodeManager. Check that they are running to win2008x64-2:7, 401. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.net.PlainSocketImpl.socketConnect(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: java.net.Socket.connect(Socket.java:525) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyReflectedFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyMethod.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.invoke(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to $3 org.python.pycode._pyx2.nmConnect (< iostream >: 118) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx2.call_function (< iostream >) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.Py.runCode(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.util.PythonInterpreter.execfile(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.WLST.main(WLST.java:131) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: in weblogic. Run WLST.main(WLST.java:29) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader
  FINE: Wed Apr 22 15:23:20 EDT 2011 Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Node Manager down from this April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader works
  FINE: Not connected to the Node Manager Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Launch NodeManager...
  April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd}.
  April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe - classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar; C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar; C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.2.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar; C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dConfig-infra_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-pmlib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-policy-core.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-secpol.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-dependencies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. WSM.policies_11.1.1\wsm-Seed-Policies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.Apache.Commons.digester_1.7.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.bind_2.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax.activation_1.1.jar. C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.stream_1.1.1.0.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.dconfigbeans_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-base.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-ca.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adflogginghandler.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adfsharembean.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\commons-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\jsp-El-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\oracle-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-WLS-auditprovider.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-MBeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-sh~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-WLST.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar"weblogic. NodeManager '-v '.
  April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 > < INFO > < domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: loading areas file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 > < WARNING > < domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: WARNING: areas file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:22 > < INFO > < store loading identity keys: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true > 22 April 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:22 weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: loading storage identity key: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < WARNING > < folder properties for configuration manager node 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: WARNING: configuration properties manager node of the file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Saving configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: save the configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: node Manager v10.3 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: Configuration settings: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenAddress = win2008x64-2, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenPort = 7401 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenBacklog = 50 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: SecureListener = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: AuthenticationEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NativeVersionEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: CrashRecoveryEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StartScriptEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StopScriptEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StartScriptName = startEMServer.cmd April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StopScriptName = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogLevel = INFO April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogLimit = 0, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogCount = 1 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogAppend = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogToStderr = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogFormatter = weblogic.nodemanager.server.LogFormatter April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainsFileEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StateCheckInterval = 500 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: QuitEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: Interface = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NetMask = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: UseMACBroadcast = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainRegistrationEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: mappings of domain names: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Secure socket listener started on 7 401, host WIN2008x64-2/192.168.182.135 port > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.SSLListener run April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: Secure socket listener started on port 7 401, host WIN2008x64-2/192.168.182.135 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Successfully launched the Node Manager. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: The Node Manager process runs independent of the WLST process. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Exit WLST won't stop the Node Manager process. Please see April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to the Node Manager records for more information. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Connection to the node Manager... April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:41 > < WARNING > < directory domain read when Configuration Error > April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: weblogic.nodemanager.common.ConfigException: the field 'GCDomain' to 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not saved in the file nodemanager.domains and dynamic domain registration is not supported. Please register the domain in the file nodemanager.domains. April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.run(Handler.java:70) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: at java.lang.Thread.run(Thread.java:619) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  ...

  Vijay,

  Your correct. Even with regard to the OEMGC 10 g Oracle still doesn't have a Windows 64 bit for OEMGC 11 g version.
  It sometimes means that are all companies except 1, the GC server 64-bit Windows servers.

  Eric

• How to implement the CFP with RAC Configuration

  Hi all
  
  I configured 11 GR 2 CARS with R12.1.1. Now I have to configure CFP
  
  Node1 - I have Application Tier and Instance DB ebiz1
  NŒUD-2 - I instance DB ebiz2
  
  How should I configure CFP with this architecture.
  
  Thanks in advance
  
  Published by: Maverick on January 21, 2011 13:51

  Salvation;

  This section, we discussed many times. Please use the search option as below:
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=PCP%2BRAC&objid=C3&DateRange=all&userid=&NumResults=15

  Respect of
  HELIOS

• When I create a new tab and enter the URL for a site already called on another tab, instead of download the new site in the new tab Firefox switches to the tab with the site already called up. How to disable "switch to tab"?

  How to disable "switch to tab"? Why? The site that I want to turn a Java program, and I want the program to run several times. I looked in tools > Options > tabs and found no way to disable the switch 'tabs '. I looked through the Options together and found nothing. I thought tools > Options > advanced could hold the key to a solution, but I found nada.

  You can turn it off by using the switch to tab no Add on more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/