Switch to the SSD with original recovery software?

Similar Questions

• Maybe it's to rewrite the BIOS with crisis recovery mode?

  Hey everybody,

  my laptop 'freezes' during BIOS 'PHOENIX' updated 2 years ago.
  SERVICE told to change the motherboard, the price as new pc, so I bought new laptop.

  I keep looking at the toshiba forum always, so I read a lot of information on the MODE of RECOVERY from CRISIS.
  so I tried to check my laptop died after 2 years.

  My satellite M100 starts in crisis recovery mode Fn + B.
  my laptop starts up to CRISIS MODE, but do not read the USB STICK
  I did the flash with the CRISDISK 1.0.0.4 USB key program, but I'm not sure I did it way right!

  My question is:
  is it really possible to REWRITE the bios with crisis recovery mode, where I can read more information on how to do it.

  I want back my M100 :)))

  Hey,.

  As Akuma writes that you should try a USB FDD instead a USB key. Key USB is supported only on new models of laptops, but as far as I know USB FDD will be always supported.

  In any case, just for your information: you should know what you're doing. It is a delicate and risky procedure and in the worst cases you might destroy the whole ROM module but if you already have a new laptop I think that it s a problem for you. ;)

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• HP 15: Switch to the SSD

  I want to change the SSD hard drive, but I'll always be able to use the version of windows OEM?

  I heard that the key is on the BIOS?

  Hello:

  You should be fine as long as the hard drive you buy is not much smaller than the one supplied with your laptop, and you plan to use the disc/card reader of recovery than you did when you got your PC.

  Or, if you have OEM W8.1 installation media.  The product key automatically fills a valid operating system installation.

  I'm about to do it myself.  I bought a HP 350 G1 in February with a 500 GB hard drive and I bought a 240 GB Intel SSD 535.  It was delivered, but I don't him have not yet received.

  I hope that the recovery disks that I made will work on the 240 GB hard drive.

  But the first thing I'll try to see if I can just put the last backup system image I did in Windows on the new SSD, so I can't do a thing to update or reinstall programs, files, etc.

  However, I have the chance to have a real HP W8.1 Pro OEM installation disc where the recovery disks do not work.

  My laptop came with W8.1 Pro demoted to W7 Pro.

  The recovery media that I made was to W7 Pro, but since I intend to switch to W10 anyway, if I have to use the installation of W8.1 on the new SSD disk, it will be fine for me.

  You can also see if doing your own installation of Microsoft W8.1 media will work with the product key in your laptop.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Compatibility of the SSD with MBP

  I was advised to upgrade my MacBook Pro to replace my hard drive with an SSD. (Samsung 850 PRO 512 GB)

  The results were great. But after a few weeks, the computer would suddenly stop and restart. Initially, it was casual; last week, it happened several times throughout the day.

  Best Buy or Samsung would give me the time of day. I had owned the player for about 6 weeks. Tired, I bought another identical yesterday disc [never forget the madness of this decision!]. Today the computer just closed and restarted.

  Is there a problem of compatibility here?  Could someone suggest probable cause?  The original never hard disk once done this.

  Thank you.

  MBP 15 "mid-2010

  Intel Core i5 to 2.53 GHz

  Remove the SSD, install it in an enclosure, plug it into the MBP via USB and see if it will start the MBP externally (key OPTION key at startup).

  If so, the internal SATA cable is the main suspect.  Replace it.  This is common with SSDS in Mbps.

  If no success, run an Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• the purchase of dvd recovery software

  I would buy the recovery DVDs for your desktop touchsmart 300-1000la. I can't find the url tp tell me the instructions to this order.

  I must say that I appreciate all the help on the forum, but I explored all the options mentioned and nothing works. I decided to use the system with another copy of Windows 7 and I have download the drivers on the HP Site. I can't get the Webcam software to work with Windows 7 EA. But it won't work for now.

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Switch of the battery with etherchannel configuration

  Hello world

  I have 2 3750 switch stack.

  I have config etherchannel between them.

  Here is the result

  2 Po2 (SD) LACP Fa1/0/15 (I) Fa2/0/15 (I)

  The two ports are up on the rise but autonomous

  Int port channel 2 is low down.

  Need to know if it is a default when we config etherchannel between the switches to the battery?

  Thank you

  Mahesh

  Hello Manu,

  If the switches are stacked, they are logically a switch.  You cannot use portchannel to connect one switch to another.

  You're basically looping ports together.

  HTH

  Reza

• How to recover a bad hard drive with no recovery software.

  I'm working on a 4-b000 want Pro.  The hard drive has failed.  I have a replacement drive on the way, but I did not create a recovery disk when the laptop was purchased.  It had windows 7-64 bit on this subject before.  What are my options to get a recovery media for this laptop?

  James

  Hi James,

  There are two options available.

  1. you can order a replacement set of support for recovery from the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  It will also recreate the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 USB flash drive Installer.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Using another PC - just download the correct disk Image ( that it must be the same version that originally came with your laptop - IE Home Premium, professional etc. ) from the link below--the source of the Windows Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Once done, use an application like Rufus to create a bootable Windows 7 usb flash drive.

  When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the Windows 7 flash player.  Select the menu of Boot Options ( f9 ).  Use the arrow keys to select the flash drive and press ENTER.

  Use the flash drive to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• Product for the graphic card Intel recovery software

  Friends,
  In the recovery of product software, I am unable to find the graphical installation file and there is no readme file to guide.
  The disc has 2 records) 1 i386 and tools) 2.

  In tools, there are 2 exe files

  RecoCHECK
  RecoFastCRC
  RecoGUI.lng
  RecoUNPACK

  Please help find which software to run.

  Kind regards
  Dhiraj Shetty

  Hello

  Once again

  I posted a response on your question about the graphics drivers. Already checked it?
  If not, I will give a short explanation on recovery media, then again a link where you can find the software graphics driver.

  Recovery media is an image packed installation of Windows on your hard drive. Which means that you CAN extract any software out of it.
  You can only recover your machine with it and nothing more.

  If we now come to the point where I give you the link (again) to find the driver you need:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So please (again), check out the site, select your model and download your drivers.

  And please: Don t post the same question twice or more. It s pretty when you post a topic and just edit the topic to add more content/questions.
  This prevents the issues clearly and everyhting overviewable...

  Greetings

• Switch to the SSD without a bootable usb key or a clone?

  IM wondering if I can install just my ssd and use command-R and restore from an external time machine back up without a usb Bootable os top or make a clone?

  Yes, you can use recovery to Internet if your computer supports. OS X: on OS X Recovery - Apple Support

  I don't think that recovery works, because the recovery partition on your hard drive that will have been deleted.

  After installation of OS X you can use the Migration Wizard of Time Machine. Use Time Machine to back up or restore your Mac - Apple Support

  However, it is much easier to clone your existing hard drive using Super Duper or Carbon Copy Cloner.

  If you clone your SSD, you can test it without removing your existing drive.

  You can connect your drive SSD using either an external hard drive like this case OWC http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Price%7c0&Ne=5000&N = 6430 & Ntt = on-the - Go + Kit or a USB to SATA cable like this.

  http://www.Amazon.ca/GP/product/B006J2L0ZM?PSC=1&redirect=true&ref_=oh_aui_detai lpage_o07_s00

  My method of choice would be cloning your hard drive to SSD.

  Kim

• HP ENVY 15-k058ca switch to the ssd?

  Hi, I have the laptop following: http://www8.hp.com/ca/en/products/laptops/product-detail.html?oid=7151038#! = form tab

  I can't seem to find a user manual to check, but I wonder if it's possible (without too much trouble) upgrading to an ssd?

  I doubt well, but if the upgrade is possible, he had enough room to keep the two drives?

  Here is the Service Manual:

  Manual

  And here's a video:

  http://support.HP.com/us-en/document/c04330942

  Simply replace the mechanical hard drive with an SSD as it:

  http://www.Newegg.com/product/product.aspx?item=N82E16820147248&cm_re=evo_840_ssd-_-20-147-248-_-product

  Sorry, the room so that one hard drive at a time.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Question of blackBerry Smartphones on the switch of the device with BDM

  Assuming you can use this to switch from a BB to a newer device (upgrade), which does everything, he move?  Tasks?  Appointment?  Contacts?

  It moves your applications on the new device?

  References to the ringtones, photos and videos from the media card so it will recognize their presence when he flies over to new device?

  Yes. Yes and Yes. All that stuff is moved and more. Switch device Wizard is good so far.

  And, when you media just what is on the media card card moves with the media card.

• When I create a new tab and enter the URL for a site already called on another tab, instead of download the new site in the new tab Firefox switches to the tab with the site already called up. How to disable "switch to tab"?

  How to disable "switch to tab"? Why? The site that I want to turn a Java program, and I want the program to run several times. I looked in tools > Options > tabs and found no way to disable the switch 'tabs '. I looked through the Options together and found nothing. I thought tools > Options > advanced could hold the key to a solution, but I found nada.

  You can turn it off by using the switch to tab no Add on more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

• BlackBerry Smartphones Can I send Pin from the pc with my desktop software

  Hi guys,.

  I'd send you the ping and sms using PC via my desktop software. Is this possible?

  PIN, no messages. PIN messaging is only between BlackBerrys.

  SMS, you can find many third party PC applications that will allow that, or services. Sometimes, your mobile operator's Web site may offer a Desktop SMS interface.