Switch SG300-10 - fatal error

Similar Questions

• PowerConnect 5548P Fatal Error - SNMP-F-BADTDOMAIN

  I have a stacked with 6 units of 5548P switch and I followed their status and basic via SNMP using Spiceworks and PRTG info.  Yesterday we had a weird breakdown where all the ports on the unit 4 are off (indicator HDMI and StackID remained upward) affecting traffic and POE devices connected to this unit.

  After the restart of unit 4, things are back to normal. Then, check the logs of the system, I found the following message is displayed. Has anyone seen this error before?

  % SYSARE STCK-A-UNITMSG: UNIT 1 ID, Msg: % SNMP-F-BADTDOMAIN: invalid or not supported TDomain received - function SNMPNotifyG_TDomainAndTAddress2UdpAddress 2 * FATAL ERROR * task Reporting: NCCD. Software version: 4.0.1.11 (October 16, 2011 time 18:10:50) 0x19f5c4 0x19c228 0x6aa9f4 0x49ba70 0x4a0f3c 0x4a10f8 0x484ba4 0x5dc3d4 0x5c6d44 0x5c6fc4 0x5c7028 0x5c7204 0x5c7258 0x5c79a4 0x5c7a70 0x5c7c20 0x5bfd78 0x5bff68 0x6856ac 0x68713c 0x4ca6dc 0x4caa9c 0x1548d0 * END OF FATAL ERROR *.

  Thank you

  I did some research about this error message and could not find a lot of information. The version of the software on the switch seems to be a very old version. The most recent firmware includes many improvements to SNMP and corrections where specific SNMP events would result in a switch to crash. A time to update the firmware of planning is the first step, I suggest you.

  http://Dell.to/1OQ6vi5

  Once updated, then watching to see if this problem persists.

• FATAL error after Power Cycle - GVRP associated?

  Hi all

  Happy new year!

  I have a network of four 300 switches of the series of small businesses. All are running the version of the 1.3.5.58 software (latest version).

  Three of them are connected by 2 groups of LAG to the central switch that in turn connects to the router facing the internet. There are no loops in the architecture and protocols spanning tree is running. There are a total of 4 VLANS and GVRP Protocol is enabled with the four VLANS created statically on the main switch.

  Normally, everything works very good and is perfectly stable.

  However, a power outage this morning resulted in a cycle of power on two of the switches. They did not recover gracefully and kept restarting.

  I removed the ports belonging to groups LAG in the main switch (not affected by the power cycle) and then rebuilt in order to recover the connectivity and restore normal operation.

  Both of the switches which restarted several entries in their logs like this: -.

  % GVRP-F-NOSTATREG: GVRPP_checkStaticToDynamic_update: Port is not declared statically on vlan 100 * FATAL ERROR * task Reporting: BRMN. Software version: 1.3.5.58 (date October 10, 2013 time 17:15:41) 0x16adbc 0x166f28 0x6df2b0 0x48fad8 0x4903e8 0 x 490608 0x51a234 0x79dfd8 0x7b9f8c 0x7c1500 0x445d 88 0x41e04c 0x7d4c80 0x61cb68 0x1223f0 * END OF FATAL ERROR *.

  Has any seen this before? I made a mistake of 'beginner' with GVRP configuration?

  Kind regards

  Andy.

  Hi Andrew, Yes, that sounds all right. Essentially every change made to the master advertising GVRP wide affects each vlan, not one of them. So I think that restarting the switch downstream which forces to join will update properly for the master join message.

  -Tom
  Please mark replied messages useful

• Fatal Error/MSI Scan Dot4_plugin crash previous issue

  I running Windows 7 64 bit

  I am trying to install the driver and software for my HP Photosmart Premium Touchsmart all in one model C309n

  There, my HP software has disappeared.  Then I started having questions incompatible ink so I decided to try to reinstall it.  For the past 4 months, I tried to switch to an accident of Dot4_patch.exe which will not allow me to download the full software OR driver.  After reading the forums, I decided to completely uninstall using the CCC folder and try to reinstall, concluding that on the Web page is that you can download the software updates is a Dot4_patch update.  So I thought that I was downloading the software, I could try to download the patch at the same time, because the patch downloading unless she has something to update...

  He started to work and I started to raise my hopes, only to be dashed in pieces with a fatal error MSI scan problem and now I won't and will probably invest in a new photo printer and probably not buy HP.  I have, can I decide to slam HP to everyone I know and review every website I can find because I don't think a system restore must be a solution to a problem.  For the amount of money I spent on this printer, I think it would work... for a really really long time.

  Please help restore my faith in HP.  Really, I would not buy another photo printer that absolutely, I can't pay.  Thank you in advance.

  Signed,

  frustrated

  Have you tried to run the file found at this link?

• Unable to Boot PeopleSoft area (PIA)-> CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  As I start my custom domain name (HC92), I get the following:
  

  exec PSWATCHSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSWATCHSRV: process id = 1636... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2656... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2644... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2832... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2692... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2448... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 496... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2964... Has begun.

  exec PSRENSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSRENSRV TESTSERV: process id 2356 =... Has begun.

  exec PSMONITORSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSMONITORSRV: process id = 1056... Has begun.

  exec JSL o '.\LOGS\stdout"e".\LOGS\stderr"- A – n //PSOFT_PC:9000 m 5 - M7-I have 5-j ANY - x 40 s 10 - c 1000000 w JSH: failed.

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  tmshutdown - qy

  ==============ERROR!================

  Try to start met domain errors! See TUXEDO log for more details.

  ==============ERROR!================

  ----------------------------

  Domain LOG FILE

  ----------------------------

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 06:34.774] (0) attempt to Begin priming on domain HC92

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/2

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.134] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_2\

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:47.056] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:51.196] (0) server started

  
  

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/1

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.665] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_1\

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.837] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:52.415] (0) server started

  
  

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/101

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.790] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_101\

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:53.087] (0) server started

  
  

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/100

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.493] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_100\

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.806] (0) server started

  
  

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.743] (0) st PeopleTools version 8.54 (Windows) arting . Tuxedo server is RENGRP 92/101

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.759] (3) switch to the new log file * C:\PS_CFG_H OME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *

  
  

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 07:13.698] (0) attempt to end HC92 field boot

  * C:\PS_CFG_HOME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *.

  -Begin PSRENSRV boot-

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.273] (3) (NET.113): RenRequest customer service request succeeded

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.843] (3) (NET.113): RenRequest customer service request succeeded

  2356.2708 [2015-01 - 13 T 17: 07:02.075] (WARN) nsmain: off the server immediately asked

  ----------------------------

  SMOKING LOG FILE

  ----------------------------

  170634.PSOFT_PC! PSADMIN.1088: Start the start on domain HC92 attempt

  170639.PSOFT_PC! tmadmin.556.2400.-2: TMADMIN_CAT:1330: INFO: command: start - a

  170641.PSOFT_PC! tmboot.2392.2544.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170643.PSOFT_PC! BBL.2340.1680.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit, Patch level (none)

  170643.PSOFT_PC! BBL.2340.1680.0: LIBTUX_CAT:262: INFO: Standard master boot

  
  

  170645.PSOFT_PC! tmboot.1488.2464.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170645.PSOFT_PC! PSWATCHSRV.1636.2816.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSWATCHSRV.1636.2816-2: LIBTUX_CAT:262: INFO: Standard main starting

  
  

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: LIBTUX_CAT:262: INFO: Standard main starting

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: LIBTUX_CAT:262: INFO: main starti Standardng

  
  

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: LIBTUX_CAT:262: INFO: Standard main stsurglace

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170656.PSOFT_PC! PSRENSRV.2356.2708.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170656.PSOFT_PC! PSRENSRV.2356.2708-2: LIBTUX_CAT:262: INFO: key start Standarding

  
  

  170658.PSOFT_PC! PSMONITORSRV.1056.2212.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170658.PSOFT_PC! PSMONITORSRV.1056.2212-2: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170658.PSOFT_PC! JSL.640.904.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64 -bit

  170658.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:262: INFO: Standard master boot

  170658.PSOFT_PC! JSL.640.904.0: INFO: version JOLT Jolt 12.1.1.0 Oracle Listener

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1568: "INFO: threshold of Compression is tot-1000000 '

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1242: ' ERROR: Bad Internet type listning address provided: //PSOFT_PC:9000 '

  170659.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  
  

  170659.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:825: ERROR: process to PSOFT JSL _Pc failed with / t tperrno (TPESYSTEM - internal system error)

  170659.PSOFT_PC! tmboot.1488.2464.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error met, launch the user error handler

  
  

  170710.PSOFT_PC! BBL.2340.1680.0: CMDTUX_CAT:26: INFO: The BBL out of system

  
  

  170713.PSOFT_PC! PSADMIN.1088End attempt to boot on domain HC92

  -------------------------------------------------------------

  SETTINGS FOR THE DOMAIN

  ------------------------------------------------------------

  ----------------------------------------------

  Menu quick access - configure area: HC92

  ----------------------------------------------

  Characteristic parameters

  ==========                                 ==========

  (1) pub/Sub servers: No. 17) DBNAME: [PSHRDMO]

  (Server 2) Quick: No. 18) DBTYPE: [ORACLE]

  (Query servers 3): No. 19) user name: [PS]

  ((4) shock: Yes 20) UserPswd: [PS]

  ((5) Jolt relay: No. 21) Networkid: [TESTSERV]

  ((6) WSL: No. 22) AddToPATH: [C:\app\psoft\product\11.2.0\dbhome_1\BIN]

  (PC 7 debugger): No. 23) ConnectID: [people]

  (Event notification 8): Yes 24) ConnectPswd: [people]

  [(Serveurs de 9) MCF: No. 25) DomainConnectPswd:]

  (10 assembler) Perf: No. 26) Port of WSL: [7000]

  ((11) Analytics servers: Yes 27) JSL Port: [9000]

  (Bridge 12) areas: No. 28) Port of JRAD: [9100]

  (13) the server events: No.

  Actions

  =========

  (14) load config as shown

  (15) custom configuration

  (16) the settings of the environment

  (h) aid for this menu

  (q) to return to the previous menu

  TIP: Enter 17 to change DBNAME, then 14 to load

  Enter the selection (1-28, h or q):

  --------------------------------------------------------------

  ENVIRONMENT SETTINGS

  --------------------------------------------------------------

  C:\Users\psoft > set

  ALLUSERSPROFILE = C:\programdata

  APPDATA = C:\Users\psoft\AppData\Roaming

  CommonProgramFiles = c: files

  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files

  CommonProgramW6432 = c: files

  COMPUTERNAME = PSOFT_PC

  ComSpec=C:\Windows\system32\cmd.exe

  FP_NO_HOST_CHECK = NO

  HOMEDRIVE = C:

  HOMEPATH = \Users\psoft

  JAVA_HOME = C:\Program Files\Java\jdk1.8.0_25

  JAVA_OPTS = "" - Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID = 1.0 - Xms32 m - Xmx64m " "

  LOCALAPPDATA = C:\Users\psoft\AppData\Local

  LOGONSERVER = \\PSOFT_PC

  NUMBER_OF_PROCESSORS = 2

  OS = Windows_NT

  Path = C:\Program Files\Java\jdk1.8.0_25\bin

  ; C:\app\psoft\product\11.2.0\dbhome_1\bin

  ; C:\app\psoft\product\11.2.0\dbhome_2\bin

  ; C:\Windows\System32; C:\Windows

  ; C:\windows\System32\Wbem

  ; C:\Windows\system32\WindowsPowerShell\v1.0\

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\bin

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin\server

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin

  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC

  PROCESSOR_ARCHITECTURE = AMD64

  PROCESSOR_IDENTIFIER = Intel64 family 6 model 58 Stepping 9 GenuineIntel

  PROCESSOR_LEVEL = 6

  PROCESSOR_REVISION = 3 a 09

  ProgramData = ProgramData

  ProgramFiles = c: Program Files

  ProgramFiles (x 86) = c: Program Files (x 86)

  ProgramW6432 = C:\Program Files

  PROMPT = $P$ G

  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  PS_APP_HOME = C:\HC9.2

  PS_CFG_HOME = C:\PS_CFG_HOME

  PS_HOME = C:\PT8.54

  PUBLIC = C:\Users\Public

  SESSION = Console

  SystemDrive = C:

  SystemRoot = C:\Windows

  TEMP = C:\Users\psoft\AppData\Local\Temp

  TMP = C:\Users\psoft\AppData\Local\Temp

  TUXDIR=C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010

  USERDOMAIN = PSOFT_PC

  USERNAME = psoft

  USERPROFILE = C:\Users\psoft

  windir = C:\Windows

  windows_tracing_flags = 3

  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  _JAVA_OPTIONS =-Xmx512M

  Found this post:

  ISNAT_CAT:1242: ERROR: Bad Internet type of listening address

  "The problem has been resolved after that I changed my name from ZEMEROV_A to ZEMEROV computer.

  Hyphens are not allowed for regular internet names. The only Microsoft DNS server

  allows hyphens. Obviously TUXEDO checks the internal Web address syntax.

  But I don't know why my IP (10.57.70.246) has failed.

  In any case, the issue is resolved. Make sure that TUXEDO documentation recommends-

  When using the name of the server host you talk server. This is case and sensitive syntax. »

  Where as: I changed my host name of psoft_pc to psoftpc and I changed the same on TNSNAMES and everything worked without problems.

  I'll mark this issue is resolved.

  Thank you.

• Fatal error: call to undefined method tNG_fields::tNG_fields() - after reappattage WAMP

  Hello

  Recently I had to replace my computer with a new one. Always running on XP, I got the old primary HDD as secondary in the new. MEASURE with WAMP worked very well in the earlier version of the system where as with the variation on I entered a series of questions.

  Here are the details of the version:

  The old Wamp version details:
  Wamp2.0
  phpMyAdmin2.11.6
  apache2.2.8
  PHP5.2.6
  
  A new:
  Wamp2.0
  phpmyadmin3.2.0.1
  Apache2.2.11
  PHP5.3.0

  MEASURE - 1.0.1.

  Now all my previous MEASURE used files as well as the new shows the error:

  Fatal error: Call to undefined method tNG_fields::tNG_fields() in C:\wamp\www\quote\includes\tng\tNG_insert.class.php on line 30

  I checked the configuration of PHP and extensions in comparison to the former. They seems to be okay.

  No idea what caused this chaos?

  Thank you

  Jay

  I had exactly the same problem, has nothing to do with your appz that have to do with the new version of php 5.3, I did a test where I have installed two versions of php 5.3 and 5.2.9 when I switched to 5.2.9 it worked as soon I went to 5.3 I got the error, what looks like uninstall is not compatiable with 5.3 or more.

• Fatal Error 2343 trying to remove from the PC Icloud

  Hi, when I try to uninstall from your PC Windows 7 icloud he puts an Error 2343 then alert to saying fatal error. It doesn't let me repair or install new implementation of the same error message?

  See if that helps - r-code-2343-message-when-trying-to/996dc521-9a03-4914-b2f6-dbf2b5293730?auth=1 http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/erro

• display messages to fatal error to try to go to a Web site

  Fatal error: unknown: impossible using the output control in the the output control to display managers in unknown on line 0

  http://www.sweetgeodes.com/
  http://www.sequimplants.com/
  http://www.sweetgeodes.com/Senft/

  This error message appears when I try to access the first link of domain that I show. I can't get on the site, but can my other two and the third link is a sup/file under that isn't reachable for change or display in WordPress.

  Win 7 32. just what is happening. No problem with the old version. That's happened with this new "update".
  I CAN work on the site using IE8. Something is flaky... Deleted history and cache. It worked. This morning he didn't. Duck Duckgo is my search engine. and I use ghostery.

  Preferred e-mail address is [email protected]

  Your comments?

• HP Probook G3 core i5 430: Fatal Error - Hp connection manager.exe

  An error message "Hp ConnectionManager.exe - Fatal error appears on my screen often after I started to use the new laptop (7 days ago) and ugraded to windows 10 provided with the s. addition"a fatal error has occurred, check Hp connection manager in the event viewer for more details.

  How can I resolve that it is very frustrating to see this message.

  Hello

  Please go to programs and features and uninstall HP Connection manager note also this software isn't always compatible with windows 10.

• Photosmart C4400 Fatal Error download drive, Windows Vista

  Operating system: Windows Vista 32-bit

  Printer: Photosmart C4400 (I have had no other printer software on my computer)

  Problem: I can not download the driver (from the included CD) on my computer.

  Step 3/4, 94%, I get a fatal error Message:

  MSI. Scan

  Microsoft.vego.STL, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9alel8e3b" version = "8.0sc727.91", type = "win32".

  Error situation coade 20218093

  What I tried: disable the firewall, by downloading the reader from HP site, try the message error MSI listed on the HP site. All to nothing does not.

  What should I do to correctly download the driver? BTW: The printer works when I use a memory card.

  Thanks for all the solutions!

  try to download the latest version of msxml for windows, and then try to reinstall

• Compaq mini 110: fatal error CNU9383FPY comps mini 110

  Fatal error message. Allows me 3 entries in password - suggested on this forum. I've tried at least 6 passwords - no work and then fatal error message and can't do anything other then go and turn it on again

  @Dommyache

  Enter e9lofuf82i (3rd character is a lowercase L)

  Kind regards

  DP - K

• Tecra A9 - Blocking Power Saver - fatal error code: 0 x 2

  Hello

  Today, when I turned on my computer the energy saver has started planting.
  I rebooted the computer several times and the result is always a fatal error has occurred. The program will end. Code: 0x2.

  Even this error appears when I try to reinstall the application.
  Perhaps it has something to do with SP3, I have installed a couple a days ago.

  Someone has an idea?

  Martin Vassilev.

  I saw this error for a long time with Windows XP Home edition. In my opinion it has nothing to do with SP3.
  My experience says that you will not be able to solve this problem. There is something wrong in the registry entries and reinstalling will not help.

  One method can help, OS install new one, more radical using recovery media.

• Fatal error HP Connection Manager

  I have a new computer HP DV7 laptop, Windows 7 premium. I clicked on and installed the HP connection manager who immediately started my receiver error fatal to this topic. So I did a factory reset computer overall.  Like a fool, I clicked on the HP connection manager again and installed a second time... Once again the fatal error messages. So, I found an uninstall uninstall program online, Revo and completely uninstalled.  So far no error more but do I have the HP connection manager? What is doing? I hope you can help me if I need reinstall it and check that the fatal errors go away. If I do not need, great! I was wondering if my impulsive removal is OK or not?

  Hello

  There are some things you need to do before you start using the HP connection manager.

  1. first download and install Microsoft .NET Framework 3.5 SP1 from here and restart the system.

  2. download andi install HP software framework from here and restart the system.

  3. When you steps above to download and install HP Connection Manager from here.

  Note:

  This software allows to control easily all wireless devices, but it is not necessary to have it in the system.

• Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

  Hello

  By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

  Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

  So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

  Hello

  Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
  In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

  Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

• Satellite M70-173 - fatal error - new drive HARD and recovery.

  Excuse my lack of knowledge.

  I received a Satellite M70-173.

  to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.

  I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.

  I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.

  I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?

  Also

  where would I go to get a recovery disk?

  I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!

  I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.

  Thank you very much in advance for any help I can get.

  Peter

  > The laptop does turn on - is it possible to make a recovery of a damaged laptop disk

  How do you do if you can't turn on the laptop?

  What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.

  In my opinion this is what you could do