Switch to Design view in impossible CS4

Similar Questions

• Design view Blank in CS4

  For some reason AutoResize is coming up completely blank in DreamWeaver CS4, with the exception of 3 icons for the encoding of document, title and the CSS file. Œuvres view live very well, but Design view fails to demonstrate anything.
  
  Does anyone know which parameter allows you to set this?
  
  Thank you
  
  Sean

  Thank you. It was fashion design, Code Live is grayed out, as there is no code not XHTML in the file... The problem has been one of those accidental clicks where I accidentally broadened the area of window with icons above to use the entire vertical screen area (I knew it was something stupid). If the area design visible under the icons at the top was only a few pixels high (almost invisible).

  You can see an example at the: http://www.envisagement.com/forum_images/DWCS4_Problem.gif

• Cs6 Dreamweaver crashes when switching from design to live view

  Cs6 Dreamweaver crashes when switching from design to live view

  I'll try later, but I think I may have found the problem. It seems that the cs6 dreamweaver made two files confquration on the same day, but only about 4 hours out. This does not seem normal to me.  Does anyone know why an expensive program like this would do that? Was it a mistake of the operator? I asked the woman who runs this program and she doesn't know anything about the configuration files. Here's what show folders > C:\Users\cyn\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\confiquration, configuration-1

  Post edited by: justbobm202

  Can I please have an answer to the question first, config please

  Post edited by: justbobm202

• Can I switch from Design Standard CS4 Design Premium CS5?

  Can I switch from Design Standard CS4 Design Premium CS5? I can't find this info on the web, so I thought I would ask here.

  I'm not sure that changing the suites is supported.

  Yes you can update Design Standard CS4 Design Premium CS5.

• Looks great in mode live view, but not in Design view after adding php code

  Can anyone help with this?  I have a php with HTML5 page that looks much like the design view, live view and in the browser. I add php code above <! doctype html > and the page goes in all directions in design mode. If I switch to live view, the page looks a lot like new. The above code <! doctype html > is php with zero html completely. It's as if design mode try to read php despite start-up code and tags php in place.

  The only work around, I have found is to place <! doctype html > at the top of the page and view design looks great again, but this cannot be used in the browser as I have the php code that requires it to be the first items found.

  I use Dreamweaver CC 2014

  Any help greatly appreciated,

  Dave

  Nancy, just to update you I had a bit of success by changing my invisible elements preferences.

• Design view is truncated

  I did something (I do not know what!) and somehow caused the design view to cut the page down to the Middle so I do not see the right half. How can I get that back to normal so I can see the entire page in design mode. I use DW CS4.

  Thanks Jon,

  It is truncated, in split mode or design mode. I stopped DW and re-opened and it is still messed up. I have toggled the Split and design views and tried to change the size of the pages. I've probably mistyped a shortcut and floated somehow the page to the left. But I don't know how to get back to normal. It's probably something stupid. I'll shut down the computer and restart to see if it makes it. I'll let you know. Otherwise, any ideas would be welcome.

  John

  FOUND. I added a style sheet to the page and it has messed up the design view. (???) Other pages are not doing. When I deleted the style sheet, it is returned to normal. Since I have to just add a little CSS will integrate on the page and I not add any style sheet and that should be OK.

  Thanks Jon.

• I lost my notice of switch (Code, Design, fashion Sprit)

  I lost my notice of switch (Code, Design, Mode of Sprit).

  Normal, that it's here.

  

  But now! It's here. It's a lot click!. Not comfortable. Please help me.

  

  View > toolbars > Document

• Problem with the Code/Design view buttons

  (My bad... maybe a clearer title will help you...)

  OK, I work with DW CS4 v.10.0 Build 4117 on a platform of Win XP Pro SP3.

  When you work with files from my site, they open in Code view.  The Split and design buttons are grayed out.  When I click the page layout button, the check mark is sometimes next to the option Code, but sometimes next to Design (even if the page is clearly displayed only in Code view!).

  To view the file in Design view or split view, click the page setup button, click on the Code, click on the button layout again, click Design or split view and then it will display the page in this way file.

  It's SO frustrating!  Is this a bug in CS4?  (I scanned through the other topics and can't seem to find anything about it.)  I don't remember having this problem with CS3 and have spoken with other DW CS3 users who also say that they have never had this happen.

  What can I do?

  Thanks in advance for any help you can provide.

  Susan

  Hi Susan,.

  I might have a solution for this one. I had the same problem. It would be 'reliable' whenever I would create a new PHP file.

  "File" > "New" > "PHP" > Layout 'None' > 'Create' - no buttons 'Split' or 'Design' (grey)

  In 'preferences' under 'File Types/errors', there is a section "open in code view".

  I removed the. The extension PHP from here, tried again and it worked!

  Maybe it will work for you.

  Good luck

  Tony

• Design view DW8 showing only limited text

  http://users.on.NET/~cmrstringer/editing/services.html
  
  It's faster to indicate the URL of the page to paste the code in...
  I can see all the text and code in the Code or split windows, but in Design view, I see only (about) half upper text and also the upper couple of my nav buttons. Can't work what to look for in aid and the couple of things that I did was not full support! I'll have to work in Code view - limit a bit to an old man...
  Can anyone help me with what is probably something simple but stupid, I did (it'll be to do with my layers, I know)...?

  Tuesday, July 29, 2008 04:16:44 + 0000 (UTC), "rosdeoz".
  wrote:

  > Then that's your answer? - or should I wait for something else?

  I was surprised no one else - including Murray answer not :-)

  > You say DW8 is no longer viable? -I just spent
  > AUD1K on two courses to help me to learn and I was assured that it is still
  > operational. Why should not be, in any case? -It is not as if upgrading
  > for CS3 means he suddenly stops working...

  I said nothing about the CS3 - and for more information - the problem with your
  code is still apparent in CS3 and CS4 beta. It is not surprising - in
  MX2004 - the problem is not displayed.
  In general, each new version of Dw is more strict with the code there
  predecessor, which I think is a good thing.

  DW 8 is very good and will do the job. I wouldn't for a minute
  the upgrade at this time. By releasing DW CS4 - perhaps the time of
  Download the track to see if it offers benefits. Experience
  with Dw8 and the course will not be wasted.

  > There is no answer to why I see only half the content my design point of view
  > screen?

  It must be because of the math in the sizes of your AP - can I suggest that
  out you on a large sheet of graph paper - this is what I would
  do. But I don't use AP do layout of basic site - for the reason
  everyone here mentions frequently. So I suggest others may be able to
  spot the problem much more quickly.

  Good luck.

  --

  ~ Malcolm ~ *...
  ~*

• Define 'Responsive Design View' as a default view

  Is there a way to define "Responsive Design View" as a view by default whenever I open a page?

  Thanks in advance.

  Hi lanapetkovic,
  Thank you for your question. Currently, there is a keyboard shortcut to open in design mode of response.

  Shortcuts in Firefox

  But it's the second question on this subject, I've created a bug to request: https://bugzilla.mozilla.org/show_bug.cgi?id=1045785

• Cannot be displayed in Design view - glGetProcAddress_win32 could not QML: glGenFramebuffersEXT

  Just upgraded to Windows 8.

  QNX Momentics was working fine before this, but now I can't show my QML files in Design view.

  This is the error I get.

  ! ENTRY com.rim.tad.tools.qml.simulator 1 0 13:31:50.547 2013-03-28
  ! MESSAGE C:\bbndk\ide\win32\x86\eclipse\jre\bin\java.exe - cp C:\bbndk\ide\win32\x86\eclipse\plugins\com.rim.tad.tools.qml.simulator_10.1.0.201303181949\ com.rim.tad.tools.qml.sim.check.RenderingCheck - target C:\bbndk\target_10_0_10_261\qnx6

  ! ENTRY com.rim.tad.tools.qml.simulator 4 0 13:31:51.159 2013-03-28
  ! Log MESSAGE QML Preview compatibility check.
  java.lang.IllegalStateException: glGetProcAddress_win32 failed: glGenFramebuffersEXT
  at com.rim.tad.tools.qml.sim.CsApplicationEngine.nExec (Native Method)
  at com.rim.tad.tools.qml.sim.CsApplicationEngine.execAndDestroy(CsApplicationEngine.java:45)
  at com.rim.tad.tools.qml.sim.CsApplicationEngineThread.run(CsApplicationEngineThread.java:55)

  Process is completed with the code:-1

  OK, I had to fix myself.

  I have a HP Pavilion D7, (3128ca).

  EU download drivers Legacy AMD here:

  http://support.AMD.com/us/KbArticles/pages/catalystlegacywin8.aspx

  Works again.

• Design view in Burrito

  Part of the reason why I upgraded to Burrito (or rather attempted, as I have always failed, see http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Error-Username-or-password-is-inv...), it's that I (thought?) I read somewhere on the new 'Design view' in Burrito with his ability to design screens in WYSIWYG style.

  However, now that I've started Burrito, I don't see "Design Mode" button (for example as seen in the first screenshot of http://www.adobe.com/devnet/flex/articles/whatsnew_flashbuilder_burrito.html)

  Is it possible to activate it?

  Or (more likely), I'm wrong and the Design mode is not available for 'Mobile Action Script projects'? (and only if I would use this thing .mxml)?

  (If the latter is true, what is the big advantage of Burrito then? Design thinking view was one of the main arguments...)

  Hey vaiomike,

  Yes you have reason to believe that you must create a Mobile Flex project and not a project of Mobile of ActionScript in order to see the "creation mode". This will result in you coding via structure Flex (MXML) and not the old plain AS3 way. the difference between the two programs comes from what I've seen, he's the Hero SDK. I don't think it is available for flash builder 4.0.1. Hero SDK brings fixes and optimization for the older SDK that makes it more usable on mobile / devices touch enabled (from what I read). I also noticed that export and tests on the playbook Simulator are much easier and faster on Burrito compared to the Flash Builder 4.0.1.

  That being said, I am currently using Flash Builder Burrito and code in pure ActionScript. For me it's easier, and I like the challenge of working without a WYSIWYG editor. There are a pros and cons of these two structures, but in the end its what is easier for you.

  If you use Design view in burrito and develop for the playbook, here is a link to an article in the Knowledge Base on how to do:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-AIR/Flex-for-the-BlackBerry-PlayBook-...

  Its a walk through of how to create your own application and settings that you need to fashion design make to bring and the blackberry SDK works.

  I hope this clears up a few things. Good luck!

• Coming back from screensaver alt tab will switch to Classic view

  Original title: Alt Tab
  Hello. Recently, I had a problem with Alt + Tab. From my screen saver (Star Trek system 47 of the mewho.com-themed) alt tab will switch to Classic view. If I type alt tab soon enough after his return on the desktop (in about one second) I can still use the Aero 2d mode.  I like the 2d Aero preview. I looked for answers on the web, including playing with the registry.  I ran several scans of virus/spyware with execution tdsskiller and Norton NPE. The scans came voids. I can't find an answer.

  Thank you.

  Hello

  Thanks for posting the request in the Microsoft community!
  I understand the issue that you are facing.
  Provide us the information to help you further.

  1. don't you make changes on the computer before the show?
  2. What is the brand and model of the computer?

  Method 1:
  Try to run the aero Troubleshooter and check if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Aero-Troubleshooter

  Method 2:
  You can update the latest display drivers from the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need further assistance, please answer and we will be happy to help you.

• Why I see in Design view is different from that in preview mode

  I read a few posts about the formatting issues, but I found the exact answer. It's annoying that I create text boxes with images that I place, but what I see in the design, it's not what I see in the preview. In Design view, all the air very well, but in the preview, the pictures are not located where I placed the. The text boxes are sometimes superimposed, etc.. I have to move photos or text boxes in different places in the design, to "accommodate" preview mode. Consolidation of all the elements of a page seems to work a little better, but still, some elements will be properly located. Is there a trick to freeze the page because it is in the design and read properly in the preview? Thank you.

  The preview mode is a more precise description of how your page will look like in a browser. Have you tried the preview of your Web site in a browser to see what it looks like?

  You can make settings on your creation mode to make sure it appears correctly in the preview.

• Dream Weaver cc Design view problems why is completely different design of the live display view

  Why Why oh why oh why is the cc Design view completely different from live view - live mode view is good, but virtually nothing is editable. How the hell can Adobe market a web as wysiwyg design tool when design mode is terrible. I saw old messages regarding this versions in 2014 and 2015.

  I'm not completely illiterate code but I would change the drawings etc. without digging deeper into the code. It's 2016 I stopped using the ages of tables there are available to my creations, but it seems that all cram into a table is the only way to get a half-decent idea of what is happening in design mode. I use a Mac which probably didn't help, but in the interest of the essential may be easier not more difficult.

  If it is true that Dreamweaver is really only for kernel developers hard, they should say so and start promoting Muse or similar for people who don't want to spend hours crafting code in all the different possible options such java php etc to produce a well-designed functional Web site.

  Does anyone know if there is a solution to this

  Design view has always been horrible to show you the design of the site, but some things worse.

  It does not run scripts of any type and more advanced css is completely invisible to the it. Code errors will also break Design mode almost instantly. Make sure you're validating your code under file > validate > validate the current document (W3C) or going directly to the validator online at http://validateo.w3.org/nu. Pay close attention to any structural errors listed are those that make the Design view go nuts.

  For what it's worth, DW is not really a wysiwyg program in the strictest sense of the acronym, regardless of how many guys at Adobe marketing wanted to believe this claim. DW requires a solid knowledge of html, css and javascript to get the best out there for static sites. These days, we use floats CSS, margin, padding and display properties to build our page layouts. While the program comes with base layouts, you can click to start with, do not understand the desire of "why it works" quickly cause massive frustration levels.

  If you really don't want you your hands dirty with the code, or simply do not have the time to become familiar with the basics of html and css, Adobe Muse would probably be a better option for you.

  Here are some links that will help you to understand its relationship to format html and css, and I hope that allow you to make more sense to DW:

  http://www.w3schools.com/HTML
  http://www.w3schools.com/CSS