Switch to the window, I chose

Similar Questions

• Combustion chamber is very slow when switching between tabs, the legs more slowly, he gets, switching between the windows of Firefox is almost instantaneous.

  In this case all that is display of each tab. For example, if I open it, say, 8 new tabs by default it takes about 5 seconds to switch between them, although all that they show are links to my sites top of page 9. I also noticed a new tab opening takes more time more I already opened. The problem is particularly well with the tabs. Navigation is not just slower than usual and as I said above, switching between Firefox Windows in not affected.

  If it works in Mode safe mode and normal mode with all extensions (Firefox, Tools/menu key > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via * button '3-bar' menu > exit (Power button)

  • Windows: File > Exit
  • Mac: Firefox > quit Firefox
  • Linux: File > exit
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• The icon on the desktop next to the Start button and the switch between the windows on my Quick Launch bar key are missing

  Original title: Millagail

  Hello

  The desktop next to the Start button icon & him switch between windows button on my quicklaunch taskbar disappeared, how I find it & put it out there so I can see the desktop between the screens.

  Thank you very much

  There are a few tips here.

  http://www.petermartinconsult.supanet.com/computer/Windows/ShowIcon.htm

  First check the trash.

• How to switch to the window of the book

  Dear friends and experts,

  After completing a certain number of actions on the files in a book, the last document is open and active.

  Now I should re - activate the address book window to perform another series of actions (running through the components of the book).

  I have not found a method to switch/turn on to book window in a script.

  if (app.FirstOpenBook.ObjectValid()){
    alert ("We have a book") };
  else { alert ("There is no book in this session")};
  

  With that, I can assure that there is a book, but how to make it active?

  Hi Klaus,

  You can store the book object in a variable, then you can refer to it later. So, you could do this:

  if (app.FirstOpenBook.ObjectValid ()) {
      var book = app.FirstOpenBook;
  }
  else {
      alert ("There is no open book in this session.");
  }
  

  or if the book is active during startup:

  if (app.ActiveBook.ObjectValid ()) {
      var book = app.ActiveBook;
  }
  else {
      alert ("There is no active book.");
  }
  

  Now when you need to reference the book in the code later, just use the variable book line 02.

  -Rick

• Switching between the Windows icon

  This icon which is on my toolbar is not preforming as he has done in the past. When using my desktop displays icons indicating the active windows, instead of cascading screens. Any ideas how to change the settings to change this back.

  Hello

  You must have active AERO to make it work as you want. You can try a Restore Point to
  When he was working or resets AERO back to active state.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -How to turn on or off transparent Aero Glass on Vista
  http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html

  How to enable Windows Vista Aero Graphics
  http://www.Petri.co.il/enable_windows_vista_aero_graphics.htm

  Vista: Enable or disable Aero Glass transparency effect
  http://www.tech-recipes.com/Rx/966/vista_enable_or_disable_aero_glass_transparency_effect/

  Activate Vista Aero in Windows Vista Home Basic
  http://www.gHacks.NET/2007/05/13/enable-Vista-Aero-in-Windows-Vista-Home-Basic/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Welcome to the Skype window rather sign in the window

  Hi all

  I am newbie in Skype, how do I "switch" between the windows authentication?

  It is a sign in the window that I need:

  

  That's what I get, and when I use my hotmail account, it fails:

  

  Thanks for your help

  Inge Rene

  Now try this:

  http://community.Skype.com/T5/Windows-desktop-client/can-t-login-because-there-re-no-text-boxes-to-d...

• How to switch between multiple windows in the same application?

  Hello

  I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.

  Here is what I feel...

  Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.

  I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.

  With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?

  Strangely, I can't switch to the "about this Mac" window.

  The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.

  Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?

  Thank you

  Avinash

  In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.

• How can awesome bar - I stop the auto switch to another window which has the same open site.

  Several times I want multiple copies of a site open, like to watch several mappings. But when I enter a new window mapquest.com , FireFox switches back me on the window that already has a copy of mapquest open. I can do things to get a 2nd copy open, but it's quite tedious. How can I disable this automatic switch for the other window? FireFox on Windows Vista Edition 12.0 Home Premium SP2

  • CTRL + left click or Middle-click the Reload button to open the current page in a new tab.
  • CTRL + left click or Middle-click points in the history of the buttons back and forward to open a page from this list in a new tab.
  • Duplicate a tab with its history by pressing CTRL and dragging the tab in a new position on the tab bar.
  • By dragging a tab in the window of the browser will detach from the tab and move in a new window, it is called tab tearing.
  • Drag a tab to the tab bar in the original or the anthers window to cancel a detachment or move a tab of a specific window. If a window is empty (you rock the last tab) then this window will be closed automatically.
  • You can use ALT + D to set the focus to the address bar and use ALT + Enter to open the current page in a new tab (no need to release the ALT key).

  Check and tell if its working.

• How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)

• Problems with the driver of the sensor on the windows 10 x 86 with the Acer Aspire Switch 10 E company

  Hello

  I installed windows 10 x 86 business on my Acer Aspire switch 10F, because there were 10 x 86 host windows install before and I couldn't get into my computer in the domain. Now, the computer is in the domain, but I have problems with drivers. I tried to install all the drivers that are on the site acer for my Acer Aspire switch 10F. And then I did the windows updates, but I have 2 drivers that do not work is the one whose name is "Kionix sensor Fusion device" and the other whose name is 'Micro Capella CM3218x ambient light sensor. Without these drivers, I can't activate the automatic rotation for when I want to use my device in the form of tablets and I can't use the automatic brightness for display.

  can someone help me please? Thank you.

  Sellion

  The answer of the Acer support is that this computer is not done for the company and it will never be drivers for the HOME version of windows 10 x 86 version.

• Default folders: How can I change my default settings so that Windows Explorer, downloads, etc., all open to the folder I chose instead of "libraries.

  How can I change my default settings so that Windows Explorer, downloads, etc., all open to the folder I chose instead of "libraries.

  Here is an article on how to change this folder opens when you click on an icon in Windows Explorer:http://www.watchingthenet.com/how-to-change-windows-explorer-icon-to-open-a-diffierent-folder-in-windows-xp-and-vista.html.  I think this will do the trick. Otherwise, maybe the following can help (but I think that's the answer you're looking for).

  Here's how to change the default template for a folder:http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets thefolder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to resetthe Windows Explorer folder view settings, disable Automatic folder Type discovery and increase theview of the folder cache to have Vista don't forget display settings, model of file type, size, or position of a specific window for when it was still closed to the location of specific path.  Keep in mind that it works, just a generic and holistic - it will not work for individual folders by folder.  That cannot be done in Vista.  But you can create shortcuts to the folders that you want and add to the desktop or right-click

  It does not work with the Sub record under, Open with,open in a new tab (Internet Explorer), etc... dialog windows of type through the goodFile menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free programhttp://autosizer.en.softonic.com/to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista:http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided:http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Switch between the Web Forms instantly and Windows 7

  Hi Newbie here.

  I bought a HP mini netbook for my wife for Christmas and anticipate one of his first questions when she opens Christmas day.

  The startup is very fast, connects directly to the instant web screen (and makes me a fast wireless connection - lucky) once in the Web now, by clicking on the icon windows closed its doors the instant web and you expect, boots up to the appearance of windows 7 things.

  However, it doesn't seem to be a shortcut/icon on the windows screen to switch quickly to the instant web.

  I ended up having to turn off and on so he can initiate instant web. Surely, it is not how it has been designed to work so my question--

  "When working in Windows 7 is an icon or a key combination shortcut that will bring instant Web screen back up again without having to re - start?

  Thank you

  MAME abdou

  PS. Sorry cannot list model etc because it has everything wrapped up now but thought it's probably a system/software between Windows 7 and HP Instant Web problem and thought someone may have already met it. If this isn't the case, I'll wait until she opened on Christmas day and list the required details.

  Sorting... in a way

  You simply can not pass successively Instant Web to Windows 7 and back again - period.

  Once in windows, you will need to restart the ' puter for it to start instant Web back up again - not very well thought in my humble OPINION.

  Oh it's a HP Mini 110 is said by the way.

  Mike

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• install windows 8 with live ID vmware - trying to local switch to the MS account

  Hello

  Only, I ran into a problem, I installed Windows 8 on VMware workstation 9. When I ate lunch at the installation of VM, I entered my Live ID account created automatically when installing windows. I was hoping he would automatically as a Windows Live ID, but after installation I saw that my account was created as a local account, instead, I tried to click on 'Microsoft account switch', but I get an error indicating that a local account already exist with that account name. I tried to create a new local account and the newspaper on this account to delete my local account which is actually my live ID. I do not have the rights or I don't know how to do it.

  Any advice?

  Concerning

  Thanks for your answers, I'm new to windows 8. What I have is this:

  -Open all the app

  -Right click on computer

  -Manage

  -Added my local account as an admministrator

  -Deleted my live ID as a local account

  Then I was able to make the switch to the Microsoft account option.

  Now, everything is in harmony with my phone Win8 and LiveID.

  Kind regards

• Control switch radio wireless (Fn + F5) via the Windows registry / software

  In a school environment, students have discovered that they can cause problems using the software switch Fn + F5 to turn off the Wifi radio. I know that the material LED turns off when this happens, but the teachers are too busy to identify it. The result is that users are unable to connect, and the Windows Welcome screen is not quite intuitive, which gives a message error "there currently no server connection.

  I am interested in applying a "fix" to this problem at startup. Maybe a fix Windows registry to "force" the Lenovo software switch to turn on the Wifi.

  I had a bag autour with a comparison of registry Interstate market and am currently getting the following (among other changes, such as DHCP etc.) diff:

  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000000
  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000001
  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000000
  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000001

  However, forcing these dwords to 0 x 1 doesn't seem to be enough to turn on the radio.

  Has anyone else had a similar experience? Is there a BIOS/UEFI underlying setting that might be able to be accessed via the software?

  Acxtually that I found after searching a bit more. Can be controlled via the command line:

  "C:\Program Files\Lenovo\HOTKEY\TpFnF5.exe" /wlon