Switchable graphics Y470P problem

Similar Questions

• Pavilion G6-2240em (C6C29EA) - switchable graphics driver problem

  Hi all!

  I have some problems with my switchable graphics driver version 8.982.10.1600 which is I guess obsolete (Intel HD 4000 + AMD Radeon 7670 m), since I updated my OS to 8.1.., I noticed that I was unable to open certain programs such as Skype, steam, WMC etc..., I also checked also in the event viewer for the error log, and it shows me what...

  

  

  is it possible to get new driver for 8.1 versions soon?

  Thanks in advance!

  Hello:

  Please read the thread below for another Member of the forum how to have switchable graphics to work on a 4540 Probook s that has the same graphics card than yours.

  Try the steps in Riri91 .

  http://h30434.www3.HP.com/T5/notebook-display-and-video/ProBook-4540s-with-Windows-8-1-64bit-can-t-i...

• Catalyst Control Center won't save my switchable graphics settings

  I recently got a HP dv6 and I really like it. It comes with a dedicated graphics of Radeon 6490 Mr. I had no problem with using it until I upgraded my Catalyst 11.1 Control Center, I think. I've since had questions apply settings that I put for switchable graphics. I can open and only display the CCC and switchable graphics, no problem:

  

  As you can see in the photo above, it seems to work and detect applications. Here is an example of one of the settings I wanted:

  

  But, when I want to record the settings changed in switchable graphics and press on apply, the settings back to the way they have been, and will not, save like nothing happened. Is not only between saving energy and High Performance card settings, she also won't let me not affect more requests. I can clearly remember as I could when I got this computer. I'm not sure but I think it was version 10 or something. I am able to just switch to a graphics special in fixed Mode very well, but I want to use switchable graphics and save energy on my laptop. This version of the CCC I have now when I go to preferences--> on the Catalyst Control Center. I think that it is 11.12.

  

  I'm pretty sure I have all the drivers for the card update, but AMD doesn't let me use downloads of their cause of site I should use the manufacturer programs I think. I have automatic updates turned on, including HP Support Assistant. I tried to look online for a solution, and the closest thing I've found is this site: http://forums.whirlpool.net.au/archive/1819873 which is a blog with someone who has almost the same problem as me, but without solution. I could perhaps try to downgrade, but I can't find a way to do this or a download link.

  I really need help with that. Please and thank you

  Hello. I don't know if you have already solved your problem, but his should help other people as well in any case. I managed to solve this problem today on my laptop. What I've done, it's the Division of hp drivers, I downloaded catalyst (catalyst in the ati site gave me this problem). the driver that ships with this catalyst did not work, so I used windows update to get a working driver. so, in theory, what you have to do is download from the hp Web site catalyst, and during installation you select custom and click Next until what he gives you a list of the programs you want to install. You should uncheck everything except catalyst. (do NOT install the driver gpu, catalyst ONLY)
  I'll post a link for the driver for my laptop model, but since you will only need a catalyst, it shouldn't be a problem.
  for windows 32 bit-> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100313-1&cc=us&dlc=en&lc=en&os=4062&product=5118769&sw_lang=
  for windows 64-bit-> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100313-1&cc=us&dlc=en&lc=en&os=4063&product=5118769&sw_lang=
  You can also search for your model, but I recommend not to install the driver anyway. just get it from windows update, I have assumed that you already have the driver anyway. Good luck.

• Switchable Graphics (AMD Radeon HD 7670) problem in Hp Pavilion g6 2305tx-windows 8.1

  Hello

  I would like to draw your kind attension to this serious problem, which I do face with AMD Mobility Radeon HD7670 driver for windows 8.1

  I use Hp pavilion 2305tx g6 that has double graphics. I bought it 6 months ago and it cost about 60 grand in Bangladesh.

  I was using Windows 7 and everything was fine. I could play every game I want, but after upgrade to 8.1 window, I am facing this switchable graphics problem. Device manager shows that driver was installed correctly but when I go to high performance for any game, it (game) is not responding but game can start without any problem in IE graphics Intel HD 4000 I cannot use my dedicated graphics card which I bought this laptop!

  Here too, no driver to blueooth. Specifically the driver Ralink RT 3290 Bluetooth. I found the driver for this hardware, but not suitable for windows 8.1. Okey BT is not a big problem, but what about the graphics driver? What is Hp? sleep? Where the drivers updated for Windows 8.1? How long I have to wait? As I brought it BDT 60 grand I have right to ask for updated driver and I want to that they as soon as POSSIBLE.

  Again, I chart AMD Radeon HD 7670 in my laptop and driver is correctly installed, but every time I spend my graphics to high performance I cann't play any game. It's because I'm not have good drivers for Windows 64-bit os 8.1.

  I've been looking for this driver for months, but I don't get a updated driver for AMD mobility radeon 7670.

  Please, I beg you! publish drivers for windows 8.1 updated 64-bit os.

  [edited by Moderator]

  The problem is resolved. It took 6 months but in the end I finally thought to her

  Follow the steps precisely

  1. open this Pc or workstation then go to uninstall or change a program

  2 appears in the list, you can see graphics driver Intel & AMD Catalyst install manager. You must uninstall both in express mode so that no other previous parameter no longer exists.

  3. Firstly, uninstall the Intel Graphics driver. If you are asked for a restart of the pc to go for it.

  4. that the list appears, you can see AMD Catalyst install manager, right click and uninstall in express mode. Uninstall all components of AMD. Restart your PC because you will be asked.

  5. go on this Pc or my PC and then drive C. open Program Files and Program Files (x 86) the two of them, if you use the 64-bit operating system. In the search box write AMD and you find some removal files remaining them all.

  6. now your PC is free of previous records and other files. Although the right, click on sign Windows and Device Manager. You'll see graphic cards and uninstall both. This step is not necessary, but just to be sure that your PC has not previously installed drivers.

  7. open your browser and download the latest graphics driver for your PC Intel. My driver was Win64_153322. Install it. If you install it correctly you're at half way through. Restart your PC, if she needs.

  8 go to the AMD web site and download the latest version of the driver. To avoid the complexity best option is to download Autodetect. Because he will choose the best suitable driver for your system. The file name is amddriverdownloader.

  9. open the amddriverdownloader file and download the driver. Download will end and it will automatically start the installation. Install it in express mode. Restart your PC because you will be asked to do.

  10. I hope your driver problems will be solved. To check it out go to Device Manager and see if the drivers are installed properly. Turn on the CCC and try to play a game of High Performance. You will see that the problem is solved.

  Here's how I solved my problem of graphics from AMD. I've been suffering since I installed Windows 8.1 right after being released and today 15 Jun 14, I solved the problem. I can play any game in now high performance.

  If you think that my opinion is useful to you, please share it.

  Lotfi Liyad Salem.

  Please hit Kudos, if I help you!

• Switchable graphics problem in pavilion g6-1251se

  I read on the switchable graphics and I have foud that you have to allow him to leave the BIOS

  My problem is that I have the latest version of TIMBER (insyde f.66) but I can't find the option switchable Graphics

  Hello

  I have the same problem and hp could not help

  so come on in:

  http://drivers.Softpedia.com/dyn-postdownload.php/ea8b80ad2c299a2e5fce708c85a316b9/53bd890c/57336/4/1

  Download the amd driver

  uninstall the driver amd you have already installed and install a new

  you will always be in dynamic mode, but you will see a great performance feel

  then enter the CCC

  and put the game you want to play high-performance

  Then, play the game and enjoy

  Believe me, it worked

  If it has worked choose this answer as a solution

  Best regards

• Windows driver 8 - switchable graphics problem

  Hello

  I installed Windows 8 RTM Enterprise (trial) on my laptop HP G62 B13SL . It has an ATI Mobility Radeon HD 5470 and an Intel's HD Graphics (Core i3, first generation).

  I installed the driver ATI Catalyst 12.8 (with Win8 compatibility). During the installation of 'ATI video driver', the screen went black (no light).

  So, I put the laptop to sleep and then I awake, and the screen worked again.

  I also installed the official Intel HD graphics driver from the HP website (ver. ( 8.15.10.2189), because the Intel.com driver gives an error when I run the installation program.

  Please help me!

  Notes/Info:

  1. If I open the Catalyst Control Center , I get an error of the AMD driver.
  2. In 'Device Manager', there are two generic screens instead of one.
  3. There is no option to change the map.

  -giofrida

  Hello

  For your switchable graphics work correctly, the ATI and Intel drivers must be installed using the package AMD - install the drivers individually will not work.  The simplest option is to wait for HP to publish an updated for Windows 8 AMD software package.

  There is a work around you can use (also popular with people running Windows 7, who wanted to just past combinations switchable graphics driver for graphic models) - see link below.  If you want to try this, make sure to save all your data first just in case where.  This method is not supported by HP, so if you want to try it, it will be at your own risk.

  http://leshcatlabs.NET/index.php/2012/08/catalyst-12-8-WHQL-unifl-for-atiintel-graphics/

  Before trying this, I suggest strongly that read you the Manual to get an idea of how it works.

  The main points to be aware of this method are:

  * Driver signature enforcement will be disabled to allow unsigned drivers to load.

  * You pouvez obtain a "Test Mode" watermark in the bottom right of your desktop.

  If your happy with it (I have personally run Windows 8 with these drivers without problem), at least he can bridge the gap until HP version updated drivers.

  Kind regards

  DP - K

• HP Pavilion g7-sr2377 Nr. D2H11EA #ACB problem with switchable graphics

  Hello everyone.

  I have a big problem with the graphics switchable on HP Pavilion g7-2377, it does not work.

  Main graphics card: Intel HD 4000

  Discreet: AMD Radeon HD7600

  I'm using a Windows 7 Ultimate x 64 operating system. Can someone help with this problem?

  Hello:

  The AMD driver install drivers for the AMD and Intel GPU.

  You can install the Intel driver or try to update all the drivers or switchable graphics do not work.

  It is the only driver that you can always use if you want the chart to work right.

  They don't update the graphics drivers switchable because it probably costs too much time and money to 3 companies to work on keeping up-to-date.

  The only time where they would never update switchable graphics drivers would be if there was a bug in that they come out.

• Switchable graphics problem on Pavilion G6 1130SL 8 64-bit Windows

  Hi all, this is my first post.

  I have a HP Pavilion G6 1130SL (upgraded to 8 GB Ram), OS: Win8 PRO 64-bit (OEM).

  My problem is with switchable graphics ATI RADEON 6470 M.

  I downloaded the latest driver for HP DRIVERS SUPPORT, but the (ATI) graphics card never works.

  Updated BIOS updated to the latest version F.66

  I tried the last beta driver from amd.com but the problem not of resloved!

  When I tried the driver 64 bit windows 7 for GRAPHIC CARD, ATI (compatibility mode) the screen goes black and the crash. (restart windows).

  Hope that this problem will be resolved by the HP SUPPORT by upgrading the DRIVER of MAP CHART because it won't work on WIN 8 64 bit!

  Intel HD 3000 sucks!

  Sorry for my bad English.

  Thank you!

  Hello again! After too many google search I found a driver package that finally WORKS!

  sp58660.exe [1/1, 297.14 M]

  ATI Radeon HD 6470 M appears correctly in the Device Manager, 512 MB dedicated memory, Graphics switching properly!

  I hope that this help any Member who have the same problem!

  Thank you!

  Sorry for the bad English.

• 4730 proBook s switchable graphics problem

  Hello all and sorry for my English not very good, but I hope you understand

  I have a laptop HP ProBook 4730 s with graphics switchable. I can't the CCC to run, so im stuck on intel HD graphics. I had the same problems with CCC, but I always managed to solve (reinstall the drivers/windows etc.), but not now.

  I did the things so far:

  -Fully formatted: C partition on my HARD drive and installed new windows 7 on

  -Remove all drivers with driver Sweeper, AMD uninstaller, repaired and cleaned with CCleaner registry

  -Updated the newer BIOS

  -Beta drivers installed for ATI

  -Tried to disable the INTEL graphics card in Device Manager, disable switchable graphics in the BIOS

  Sometimes, the CCC doesn't even start (it's in the Manager of tasks under process), sometimes to give me error CCC, CLI or MOM. If I disable switchable graphics in the bios, I find myself in VGA (odd resolution) mode, if I disable ATI or INTEL in Device Manager, I also find myself with weird resolution...

  My computer specs are:

  Intel i5 (2.4 gHz) processor

  700 GB HARD drive

  4 GB of RAM

  Intel HD graphics and AMD Radeon HD 6490 M 1 GB

  Windows 7 enterprise (64-bit)

  Hello Blazkox,

  You use a computer for business/commercial, but you posted on the table of consumption. To get broader coverage so that you can get the required assistance please post your question on this forum experts working specifically with the HP Probooks and will be able to help. It is also possible that you may need to create a new profile before posting.

  I hope everything is working for you.

  Thank you

• Problems of ThinkPad T410s switchable Graphics Driver to Version 8.16.11.8955 models / 1.0.15.0

  Hello

  I have a Windows 7 64 bit Pro its own. installation on my t410s 2904 FYG (no driver no additional software-> windows only). The pilot 8.16.11.8955 / 1.0.15.0 (NVIDIA Display Driver for Windows 7 (64 bit) - ThinkPad T410s (switchable graphic models)) does not work on a new install of Windows 7 64-bit.

  If you update the old version with it, it works... Unfortunately you can not download the old driver on lenovo support page

  Maybe there is a problem with this change?

  NView Desktop Manager application collected in this package. Refer to the
  Remarks section for more information.

  Any ideas?

  
  

• PROBLEMS T400 with switchable graphics technology.

  A few months ago, I bought T400. without having to install any other drivers.
  BUT yesterday.
  I install a driver (which is said to be able to activate the switchable graphics card)
  from here: http://www-307.ibm.com/pc/support/site.wss/MIGR-70417.html

  I download the files and then extract all.
  then I went to the place where I extract and install the Setup file.

  After installing and restrting, I click with the right button on the destop and click Catalyst Control Center.
  BUT he jumped a Catalyst Control Center Notification:

  "ATI Catalyst Control Center cannot be started because the active GPU is not supported."

  After that nothing came out.

  Can someone show me how to solve this problem?
  How do I CHANGE my GPU
  How to make my switchable map USABLE chart.

  Thanks in advance. need to solve this problem. appreciated. =]

  Hello... Im just solve the same problem while I touched your post...

  you clicked on the power evil (of windows) icon, you need to right click the icon of the Lenovo Power Manager, it's just to the left of all windows system tray icons. You must install the Lenovo Power Manager or activate the Power Manager icon to the correct RMB )

  D

• 5650 driver Mobility Radeon graphic card problems / switchable dv6-3143us

  I bought my dv6-3143us, 8 months ago, and I had problems with the video driver provided by HP since day 1.

  Any time my laptop comes out of standby or hibernation, and switchable graphics tries to put a switch (i.e. 5650 front using the sleep/hibernate development, then resume with the power cable disconnected) I get a black screen and have to sleep and resume again to lift the screen correctly. In this case 100% of the time when the previous situation happens.

  In addition, I am often unable to switch to the built-in GPU, once I've been using the 5650. I am aware that the switch can be done if the 5650 is used, but I have confirmed that there are no programs that should be dead on when I try to make the transition. It is an intermittent problem, but is nevertheless considerable discomfort.

  My question final and least excusable, is offered by HP display driver is clearly outdated. This becomes an important issue when a second screen is used, in particular with the VGA output. Periodic flickering occurs on laptops and external screens (about a minute between flashes), and the cursor will sometimes become blurred on the external display. I know that these two issues have been resolved with the latest drivers from AMD, that I have a Radeon 6870 in my office and faced the same problems with an older driver.

  This post is not intended to be advice, there are no solutions to the problems I mentioned, I'm just asking the driver provided by HP to be brought up-to-date with current offerings from AMD.

  I would ask that someone else knows these questions post here, so that these issues become as visible as possible to the HP customer service. Thank you for your attention.

  Looks like it worked!

  Check out post Cioroianua to halfway down the page here.

  The link to the zipped driver is broken, but this link worked when I tried.

  This is an update to 11.8 I think

  EDIT:

  Here is a link to the 11,12 drivers! Work on a bunch of cards; Just follow their instructions and you'll be up-to-date!

• Switchable graphics problem AMD

  My laptop (HP Pavilion g4 1001tx) it motherboard broke and I had to have it fixed... after 1 month, the motherboard has been changed by another mother model (HP Pavilion g6t - 1B 00 CTO)... evrything work very well, but the Committee "switchable graphics" have been changed / / / "switchable graphics method" before the change of motherboard: http://www.youtube.com/watch?v=NVDiN06fiOU ------.

  watch? v = NVDiN06fiOU / / / the "switchable graphics method" after change of motherboard: http://www.youtube.com/watch?v=4oB2oDO-IFk 
  watch? v = 4oB2oDO-IFk / / / this web page may be useful: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02731962&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=5112031 ------/ / /------please help... I reinstalled windows... drivers amd does not work before and after change of motherboard, only the Hp oanes... Please, how to get back the Committee "switchable graphics" as the oane in the first video?

  Hi Cristi,

  
  Welcome to the Microsoft community.
  
  From your problem description, I understand that AMD does not work.
  
  As you are referring to the "Switchable Graphics" in Amd catalyst control center and Amd is these software development so I suggest you to get in touch with Amd and check.
   
  See the link.
   
  SUPPORT OF AMD.
  http://support.AMD.com/us/pages/AMDSupportHub.aspx
   
   
  Hope the above information helps.

  
  Let us know if you have other questions about Windows in the future. We will be happy to help you

• Switchable graphics problem - settings are not saved

  Hello

  I don't know if I posted in the right category

  I just bought Acer Aspire E1 572 g which had amd 8670 M built in. I'm having a problem with the switchable graphics when I ever I save a setting for an application he doesnot registers and changes are back to "Unassigned". I tried looking for drivers times that they are more recent or not, and they were more recent, please tell me if anyone has a solution.

  Hi Ammar,

  Thanks for the reply.

  This question needs an advanced troubleshooting and for this I suggest you to contact Acer community who are experts with advanced tools and permissions to help you with such questions.

  http://community.Acer.com/T5/discussion-forums/CT-p/boards

  Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

  Thank you.

• Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

  Hello

  I'm of the Germany, but I'll do my best to write this in English.

  The product name and number: HP Envy 17 3010eg {information}

  Operating system: Windows 8 Pro 64-bit

  Drivers: everything up to date

   

  Long story short,

  I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

  So I waited until the driver for Windows 8 support has been completed by HP.

  This month, I noticed that HP has released a graphic driver for Windows 8.

  Happy as I was I installed Windows 8 immediately via upgrade function.

  I installed all the missing drivers.

  * Update Bios to F.08*

  I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

  BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

  Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

  The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

  So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

  I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

  Nice, but I have no idea how to turn it on again.

  So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

  So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

  * Tested in Bios Version F.09*

  Yesterday, I noticed another Bios Update. This time in version F.09.

  So, I updated the Bios with Windows 7 installed.

  Everything went well (I thought!).

  Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

  BUT without success...

  So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

  * Problems with Bios Version F.09*

  BUT then, I noticed a strange behaviour of my laptop:

  -proximity sensor no longer works

  -the keyboard backlight cannot be (DIS-) activated

  -the brightness of the backlight is half as usual

  -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

  * Version of the Bios downgraded to F.05*

  So, I spent to the version of the Bios to the older Version available: F05

  And I was a little shocked by the result.

  Windows 8 acknowledged the Intel HD 3000 graphics card again!

  The problem is the Bios!

  Then, I upgraded the version of Bios version to see which version of the cause of the problem:

  Œuvres F05

  Œuvres F.06

  F.08 does not work

  F.09 does not work

   

  So I decided to stay with the version F.06

  BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

  I installed the driver anyway...

  I found myself with a black screen... I had to reinstall Windows completely.

  Yet more long story short,

  I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

  I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

  So for the moment I am absolutely no idea what the problem might be.

  The support has not yet heard of these problems and I have not found any website which explains the same problem.

  Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

  Someone else got the same problems?

  What do you think? Is it really a problem with the Bios?

  What can I do to solve the problem?

  for me the best driver are:

  http://leshcatlabs.NET/

  Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.