SX10 presentation framerate

Similar Questions

• SX10 problem with sending audio with the video presentation

  I recently deployed a Cisco SX10 and found a fault, that I can't understand. When sharing content with extreme of end users, they can see the video but don't get no audio. I checked the settings and I'm confused as to what is misconfigured.

  I checked the bases, wiring, volume, and the settings in the codec it resembles a simple set up. When I introduce locally I have the same problem - no sound from the TV.

  Any ideas?

  Looking at the Guide of Installation SX10 on pg 5.  The SX10 is not an audio connector dedicated to the VGA input, since doesn't send VGA audio you need an additional input for audio.  I test using the HDMI input, and I heard audio locally and on the far - end, since HDMI will send video and audio together.

• SX 20 12 X quality of presentation

  To the one who can help you.

  Currently, we have installed a system SX20 in 2 of our offices, headquarters and a branch. We currently have a WAN connection between the 2 offices with a 20 MB connection between two sites. Our branch has about 30 feet of cable from the laptop to the CISCO codec. Our headquarters is on 50pieds of the laptop for the codec.

  We have tested sending always content and content through the laptop computer in the Branch Office to Headquarters and the images are fine, but as soon as we tried to send video on it was choppy and pixelated. When send us content directly to the tv to the same cable and same distance displays without problems and when we look at a video of a place that is in another fine stream as well. I guess that our connection between the two offices should be good enough, we'll have about a transfer rate of 5 MB on the files. in view of the firewall that will soon be replaced, are there specific ports for video that will help you? the codec just isn't strong enough to send content through?

  Sent by Cisco Support technique iPad App

  All entries have a setting that determines how the content is sent to the farsite of quality.  When it is set on the sharpness I beieve is the default value for entry-level PC, send content to about 12 images per second or somewhere around there.  When it is set to the motion, he will send the content about a full 30 frames per second.

  Video Input Source [1..2] Quality
  When encoding and transmitting video there will be a trade-off between high resolution and
  high framerate. For some video sources it is more important to transmit high framerate than high
  resolution and vice versa. The Quality setting specifies whether to give priority to high frame rate
  or to high resolution for a given source.
  Requires user role: ADMIN
  Value space:
  Motion: Gives the highest possible framerate. Used when there is a need for higher frame
  rates, typically when a large number of participants are present or when there is a lot of
  motion in the picture.
  Sharpness: Gives the highest possible resolution. Used when you want the highest quality of
  detailed images and graphics.
  Example: Video Input Source 1 Quality: Motion
  

  This might not be the direct answer to your problem, but it might be useful.

• find the framerate to place keyframes

  We build a plugin to place keyframes in a composition

  We want the keyframes to appear in the timespots that match the framerate of the composition.

  We have, at present, is on about:

  	A_Time time;
  	AEGP_ItemH myitem.
  	Suites. ItemSuite8()-> AEGP_GetActiveItem (& myitem);
  	Suites. ItemSuite8()-> AEGP_GetItemCurrentTime (Monelement and time)
  	(for i...) KeyTime = A_Time {mytime + i * 1000, time.scale};
  	Suites. KeyframeSuite4()-> AEGP_AddKeyframes (positionKeyframesInfo, AEGP_LTimeMode_CompTime, keyTime, & index);
  	Suites. KeyframeSuite4()-> AEGP_SetAddKeyframe (positionKeyframesInfo, index, & tempPosition);

  where I * 1000 is an approximation of hackers and terrible where keyframes should be placed. (we tried an estimate more complicated involving taking the framerate in the time scale and dividing by himself, with rounding errors and hat kind of worked, sometimes, but then sometimes it does not at all and in any case isn't really what we actually need for our problem remains the same.)

  There must be a way to put a keyframe by image, by using the framerate of the composition. but we read everything we could find in the SDK, and we don't see it.

  What can we do? is there a need that gives us this information?

  -----

  Another way to phrase this question

  The call to -> AEGP_AddKeyframes KeyframeSuite4() has a required argument to an A_Time where to place the frame.

  We would like at this point to match, gradually, the time of each new image, depending on the framerate of original compositions.

  How can we achieve this?

  ---

  ETA: also, for my own edification, in

  () AEGP_SetAddKeyframe
  AEGP_AddKeyframesInfoH akH,
  A_long indexL,
  const AEGP_StreamValue2 * valueP);

  
  

  What is the meaning/purpose of A_long indexL?
  

  Hello!

  What you are looking for is CompSuite8()-> AEGP_GetCompFramerate (compH, &fps));)

  To use it, you will need to get a CompH of your ItemH like this CompSuite8()-> AEGP_GetCompFromItem (ItemH & CompH)

  Now you can set A_Time keyTime = {mytime + i * time.scale / fps, time.scale};

  It will be useful,

  François

  PS: I don't see the end of your question...

  Suites. KeyframeSuite4()-> AEGP_AddKeyframes (positionKeyframesInfo, AEGP_LTimeMode_CompTime, & keyTime, & index);

  Index is the index of the newly created key, so that you know which key should be changed with suites. KeyframeSuite4()-> AEGP_SetAddKeyframe (positionKeyframesInfo, index, & tempPosition);

• Video framerate massively out of sync on the final rendering only

  Hi all

  I used a screen reader program (Cam Studio) to save myself showing something on the screen in full HD and record my voice with a microphone. Due to the program settings that have been apparently set the final file was a 20 fps framerate but was otherwise fine played and downloaded on YouTube with success. However there was a long interval at first until I started talking so I thought I'd use After Effects to crop the video and add a few titles in singles. I created a model to the standard 25 fps 720 p and imported images. Everything seemed fine, he was appearing on the timeline and preview at the same rate as the original. I made him as H264, but the final file was a total mess with the audio that plays normally but the video play faster, perhaps double the speed. I checked the images 'Interpret' > hand ' settings and it was defined on the original framerate 20 fps and also checked the details on VLC which also reported 20 fps. I recreated the comp and tried repeatedly to rule out tweaks, I would put but everything seems to be set up correctly.

  Anyone got any ideas?

  Thank you very much

  KW

  Finally it worked.

  I went on the whole record that incorrectly displayed as a sequence of images long - he was a little less 11 000 executives and the run time was 9.09. Simple math reveals that this means that the actual framerate was 5.62 fps not the 20 fps that was reported by all of the programs it runs. Defining "Interpret images" to the correct value then made the images make it perfectly in a model of 25 frames per second.

  The process with the image sequence was necessary because I did not have a good figure for the actual framerate and only knew he was playing MUCH faster (about four times) the speed, he should have. It seems that the framerate on the file flag was incorrectly, but the file always presents in preview in AE and plays correctly on YouTube and VLC which is kinda weird. My method is a very clumsy to find the solution, but an option if you have similar problems. Of course, the quality of the images is not important, because the real goal is simply to learn the total number of frame, so you can generate a sequence of images with resolutions tiny to save disk space and time. As it was, it took a few minutes to make almost 11 000 images in quarter HD resolution.

  Hope it will be useful to you.

  Edit: the framerate in real-time was also visible in the images in the preview screen, making the frame of the output method is not necessary, once you know this figure.

• Presenter display rate

  I was just wondering, anyone know what would be the framerate using Presenter on a DSL or T1 line? For example, GoRoMeeting only supports a framerate max 3 to 5 frames per second.
  
  Thank you
  Pete ~

  Presenter turns at 15 frames per second. In this way it works natively in Acrobat Connect (which manages also to 15 fps).

  Jorma@Realeyes

• Are aware that even if the rotation function is no longer available on the new trackpad, it is always presented on their Apple tutorial. Please discuss!

  Are aware that even if the rotation function is no longer available on the new trackpad, it is always presented on their Apple tutorial. Please discuss!

  Hello

  Read this article to support > gestures multitouch for use on your Mac - Apple supported

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• mini presentation remote mac works only sporadically

  Hi all

  I have a Logitech R400 that needs to be able to control the PowerPoint on a Mac mini.

  Yesterday it worked fine.

  Today, he works only sporadically, and I have not changed a thing. It's still the same presentation.

  Sometimes, you can change the slide and sometimes you can't (even when standing very close to the Mac mini).

  This Mac mini specifications are quite anemic (1.4 GHz and 4 GB of memory), but I closed all applications except PowerPoint and have nearly 2 GB of free memory.

  Any thoughts?

  Any help would be most appreciated!

  Mike

  Based on

  http://www.Logitech.com/en-us/product/Wireless-Presenter-R400

  the remote uses a USB wifi dongle and operates on the 2.4 GHz band.

  This band is susceptible to interference and I think that is causing your problem.

  Peripheral USB 3 is a source of interference.

  Try to use the dongle at the end of an extension USB cable

• ICloud presentations should play on any browser

  Why presentations Keynote iCloud can not play on any browser?  I am trying to format the 6 pages of interactive text to be displayed on any smartphone and I realize that users must have Keynote installed, or they are out of luck!

  My bad.  Collaborate lets others with a link to view the Keynote presentation.  Transitions, constructions, and hyperlinks are all active in the view.

• Presentation causing Sierra to Crash and disconnection

  Hello

  I noticed a problem with macOS Sierra running on a Mid 2015 15 "MacBook Pro with the retina display. Sometimes when I press F3 to access presentation and my several computers desktop computer freezes and goes back to the login screen.

  When I log in, it's like I started a new session and the apps I had open start back once again, but with their wiped sessions. This happens to me about 3 times in a day's work, most of the time that exposed works very well. Very strange!

  Did anyone else encounter this problem at all?

  Hi there, stvwlkr!

  Thank you for joining the communities Support from Apple! Looks like you are having problems with the Mission control. I know how important it is to make sure that it works correctly. What you might want to try is then a specific restart. Read this article for trying safe mode if your Mac does not end commissioning. Although this article is about the computer does not start correctly, it can also perform repairs and stop startup items that can cause problems.

  Another option you can try is in this article: How to test a problem in another user on your Mac account. This will allow you to check to see if the problem is specific to the user or the system-wide.

  See you soon!

• Can I change a speech during the presentation?

  Sorry for my English...

  at a meeting, I often have to change something in the presentation while projecting...

  Is it possible? or should I stop the projection, to modify and to revive the keynote?

  Yes its possible to change the speech while projecting, and Yes, you're out of the game mode to make the changes.

• After losing in keynote, my presentation has disappeared

  I have the BONE 10.11.6 with a MacBook Pro (17-inch, mid 2010) with 2.66 GHz Intel Core i7 and 8 GB 1067 MHz DDR3; my speech is version 6.6.2 (2571). After losing, I can't find the presentation more. I made several stops, but do not change the file name. So are 4 days of hard work really gone forever?

  Try going here for help.

  OS X El Capitan: If you can't find a file

  Hope this helps, good luck to you.

• Keynote presentation

  I created a keynote presentation, I want to export as a quicktime movie,

  I want to click through the slides with a simple click by slide,

  When I click the slide after the slide automatically animations.

  Then it stops

  I click once again to the next slide and so on.

  Is this possible?

  Thank you very much

  Adam

  Manual advance in Quicktime is not available in the current version of Keynote.

  It was available in version of iWork 09 that uses another version of QuickTime.

  BEKER 09 is still available at Amazon and Ebay and is compatible with El Capitan.

• app purchase where the physical store is not present

  I am from Bangladesh and that you wish to purchase an app on the app store, but there is no shop in my country. is there an alternative way for app purchases where the physical store is not present

  TIA

  Mubaswir

  No, the only place to get iOS apps is on the app store (via iTunes on a computer or an App Store app on an iOS device) and you must be in a country to use its iTunes/App store (which is part of the terms of the store) - until if/when Apple open an iTunes store in Bangladesh (we are fellow users we do not know what might happen until Apple announce something) Unfortunately you will not be able to download any content from the iTunes store.