Presenter display rate
I was just wondering, anyone know what would be the framerate using Presenter on a DSL or T1 line? For example, GoRoMeeting only supports a framerate max 3 to 5 frames per second.Thank you
Pete ~
Presenter turns at 15 frames per second. In this way it works natively in Acrobat Connect (which manages also to 15 fps).
Jorma@Realeyes
Tags: Adobe
Similar Questions
-
I have Keynote 6.6. I created my view presenter on how I want to get my presentation on a projector (not yet hooked). I guess that when I'm ready to present, I hit the play button in the toolbar. When I do, he'll just in playback mode. I want to see the "presenter" display that shows my notes, etc., but I have not, it will just in this game mode. When I, for example, press on repeat slide show, it works fine. What I am doing wrong? Would it because I have to be plugged into the projector or I'm doing something else wrong? Thank you.
(I'm on Mac 10.11 upgraded to Yosemite)
with the projector connected;
- Disable mirroring in: System Preferences > displays
- Keynote preferences > slide show: Select to: enable presenter view
Repeat slideshow displays the screen of the presenter to allow the in place the presenter tools
When in the game, view a second (the projector) must be connected to enable the display of the screen of the presenter.
-
Hello.
If I have a loader which loads dynamically different SWF files with different rates display is all inheret the framerate of the charger (the main swf file) or can I set different display rate or keep the original framerates for each swf loaded in the main SWF.
Secondly, when I load a SWF in the main swf file, can I somehow measure the length in seconds of the swf file that is loaded, so I know when to load the next swf file?
Thank you.
There is a framerate defined by the scene. You can adjust dynamically using as3, but the framerate will apply to all the clips.
You can determine the total number of frames of a movieclip (with the totalFrames property). using the stage.frameRate property you can determine the duration of a movieclip, if your swf file is playing on the frameRate. but you can more directly and more precisely determine when a movieclip ends the game by checking the currentFrame property and comparing its totalFrames property.
-
Tabular presentation displays lines not (although it should be)
HI -.
I have a page that contains a tabular presentation, which I call in an iframe. Frame recharge parent the tabular presentation when an item on a jquery tree is selected (settings for the new page).
I open a page of the child who doesn't have any line in, choose 'Add new lines', then back to the parent page and select another node in the tree. Loading of the page of the child, but no data is displayed in my tabular form - even if there is data. I get a header and the line of paging only. If I click on the button "next" pagination, refreshes the page of the child and the data is displayed as I hope.
I think that paging is being upset in some sort of page being refreshed by the parent to halfway between the creation of a new line and saving it.
How can I say specifically the page re - load with regular pagination values? Or I'm doing something too hard?
Thanks in advance - I would be recognizing all of the ideas, we're really stuck!Rochelle,
Looks like you need to reset pagination when you click on the tree to recharge your tabular presentation, you can do this by putting "RP" in the URL that you call, here the section in the doc that explains the syntax of the URL:
http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/concept.htm#BEIJCIAG
Then look at this description of URL:
f? p = App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
... you need to get PR in the position where it says ClearCache, for example (assuming that your tabular form is on page 10):
f? p = & APP_ID: 10: & SESSION. : RP
I just want to mention that when you use 4 APEX, you can actually refresh regions in a table through dynamic actions, without iFrames.
Kind regards
Marc -
Y50-70 display blinking rate increases exponentially on 40% memory usage
I upgraded my new laptop of lenovo Y50-70 to win 10 about 1 month ago. Since that time I noticed that my screen would now and then Flash. I looked for a solution and I had a lenovo... Web site deactivation of 2applications in the Manager of tasks in safe mode. He helped abit because the flicker rate slowed, but it never disappeared.
I investigated the system of som time now and I have found that when the memory usage goes up to about 40% flickering display rate increases exponentially. I have 8G of RAM, GTX 960 2 GB graphics card so I don't expect a problem when running my usually of programs. I won't even do games even if I know that the machine can handle but I guess it would be much worse if I tried.
Please give me a permanent solution.
Note from the admin; type of system added to the subject line
I can't say for sure, but did you ask al updates to the Lenovo Web site for your system?
You can download and apply all updates Win 10, including the latest version of the BIOS.
-
Display the HTML file by using content presenter
Hello
The default content presenter displays content from a single html file in a page as expected. But I tried to show all HTML files in a folder. He has not worked as planned.
should what adf component I use to view the html file?
For example, we use af:image in content presenter to display image from a folder files.
I use jdev 11.1.7.0 with the last extension of webcenter.
Thank you
M Chambers
Hello
Try af:inlineFrame to display html content.
Hope this works
-
WebCenter spaces: content display model Presenter for the image gallery
Hi all
I use 11.1.1.6 Webcenter spaces
I need to create a custom content presenter display model where a folder is chosen by the moderator. And all the files it contains will be shown as an album in a drop down.
Whenever the user selects any album in the drop-down list, the images inside this album should be below in a thumbnail.
I've set up two models one for the drop-down list and others to show images.
I just need to know how can I use the two together. And how the selection of an album in the drop-down list should change the images?
Should I call 2nd model presenter content from 1?
Help, please.
Kind regards
Deepak
Hello.
I have a better approach:
- Store in a variable of limited scope, the folder selected in selectOneChoice.
- Use the cmfn:searchNodes function to retrieve the folder nodes
- Use the list of nodes with dt:contentTemplate.
Information on the use of cmfn:searchNodes:
Basically, he's waiting for the name of your repository of the University Complutense of MADRID and a CMIS query that must be built using the information in your file or a path.
The CMIS query will have to be something like the following example (he gets all the contents of the folder with xCollectionId =
988901828852000401
SELECT * FROM cmis:document WHERE IN_TREE('/ucm/IDC:Folder/988901828852000401')
Retrieve a collection of content nodes by CMIS query, specifying the maximum number of nodes to return. searchNodes oracle.webcenter.content.integration.servlets.functions.NodeRetrievalFunctions oracle.webcenter.content.integration.Node[] searchNodes(java.lang.String, java.lang.String, java.lang.Integer)
]]> -
Hello
We test a SX10 VC unit and we have problems to achieve a framerate high for channel presentation, adapted to the movements in real time and the match between the image and the sound (i.e. approximately 30 fps).
We used SX20 units and that you are able to read the string of presentation videos at 30 frames per second without problem, but we tested an SX10 and we couldn't do it. We tried to change the 'VideoBandwidth PresentationChannel weight' parameter to the maximum value (10) and "VideoBandwidth salon main weight" down (1), and it is notable that the dedicated bandwidth of the channel of the presentation was excellent, the framerate really remained poor (5-6 FPS). According to this scenario, calling at 1152 kbps, we received about 900 Kbps for the presentation and 100 kbps for the main channel, only 5 fps.
Is there a hardware/firmware limitation in the SX10 that does not allow the unit to reach the display rate higher for the channel of presentation?
If so, it is planned for future versions?Best regards.
This is a hardware limitation, as the SX10 is a codec for entry level, there not all abilities than the other major codecs. He is able to WXGAp5 by the SX10 data sheet, see "dual stream".
-
Will be the heart rate accurately record to look at if you have atrial fibrillation?
Apple Watch will record where the atrial fibrillation is present heart rate accurately?
Hello
Information on how and when Apple Watch measures your heart rate - and some of the factors that may affect the reliability of readings - are available here:
Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support
Note that Apple Watch, heart rate sensor and the apps included Apple Watch are not medical devices and are intended solely for purposes of fitness. They are not designed or intended to be used in the diagnosis of disease or other conditions, or to cure, mitigation, treatment or prevention of the disease.
More information:
-
Presenting Keynote 6.6.2 problems
Keynote 6.6.2 when I present, I just get a cursor and that's it. I want to be able to see the footnote / the notes slide when I present to you, but the only way it seems what to do with the settings that you get when you press play. These are not displayed. I also use a 12 inch MacBook.
- (Keynote > Preferences > slide show > the option button corresponding: enable presenter view)
- Connect a projector or an external display for Mac
- ensure that the option of copying video is not selected in: (System Preferences > monitors > Arrangement)
- Slideshow play (play > play slideshow)
- If the presenter screen is displayed on the external screen, press X on the keyboard
- The presenter display button-click Customize at the top right of the screen, and then select the options you want to display
-
use of display and IMAQ image memory
Hello
I wonder how much memory is used when updating from imaq image display.
I need to display images (512 x 512 size) acquired by a camera in real time. But I don't necessarily need show each of them so that can save me some memory. The camera runs at 50 fps and I can live with display rate 5 frames per second.
Right now my image display is updated from the buffer (updated at 50 fps) continuous (Snapshot mode off). I guess I have 3 options:
1 use the lifestyle snapshot and say explicitly on the screen to update. Whenever the display is refreshed, a copy of the image is created. But I guess that the previous copy is destroyed at the next update. If this method costs an extra copy of the image in memory.
2. create an extra copy of the image that is updated only at 5 fps and connect it to the display of the image (Snapshot mode off). I think this is equivalent to method 1, with respect to the use of the memory.
3. in the State. No additional copies of the image is stored. But the display is updated at 50 fps.
Which is more expensive, update the display 10 times faster or holding an extra image even copy of the memory size?
Thank you!
It is not really a memory problem: you have an indicator to display images. Display an image requires additional resources, but there is no continuous memory allocation! Once the resources are allocated, the use of the memory of your application will remain stable. (Otherwise, something goes wrong and need to be identified and fixed.)
-
Standard NTSC 1080 p frame rates?
Hello and thanks for having me! Very new (b) to Adobe Premier, so I'll throw something basic, thanks for your advice:
the short version:
What is the 'standard' NTSC 1080 p framerate? This framerate differ from what you would use to output 720 p,
and you would choose different framerates according to the delivery method (web vs bluray)?
the long version:
I have at my disposal a very capable of working platform on and just do some basic for my audio RESUME reel changes. The source material is usually 1080 p and 720 p, if it be listened in my playback sources HDMI capture card or original complete production which I scored for the customers.
Therefore, when change my reel together, I would like to work in full 1080 p and downconvert to PostScript to formats smaller.
However, I am very new to video editing and I don't know what framerate to work in. I see the selections available NTSC 1080 p to several display rate
I am aware of all available framerates in the United States and abroad, so my question is:
What is the frequency of standard NTSC 1080 p used for web transmission BluRay or wide images? Some people tell me '60, its standard of use. " Others tell me its 24. Others still say 24 is only for work with the film or interpolation from other sources to 'make your stuff look like film'.
Thank you for the answers or resources and have a good evening!
Welcome to the forum.
Changing the frame rate may cause problems, possible mixture of frame rates.
For a chart of still supported sizes of BD and frame rates, see Jeff Bellune to the FAQ.
Good luck
Hunt
-
How to use the remote tape connected to an another mediaserver library?
Hi 2Tous!
I have 2 media servers in my environment of SecureBackup.
The first dbsora98 with the virtual tape library (on SPARC Solaris 10) and the second dbsora17 with ADIC Scalar (OEL 5.6)
But why I can't use scalar dbsora98 or dbsora17?
dbsora17:
OB > inv scalar-L
Error: cannot open the connection of qlm - failed validate the certificate
OB > lsv scalar-L
Error: cannot open the connection of qlm - failed validate the certificate
OB > unlabelv reader1-d-f 1
Error: cannot open the connection of qlm - failed validate the certificate
OB > pingh dbsora98
dbsora98 (address 10.159.4.186): Oracle Secure Backup and NDMP services are available
OB > scalar pingd
Info: scalar library accessible.
News: Player 1 reader1 accessible.
Info: accessible 2 lecteur2 player.
dbsora98:
OB > inv scalar-L
OB > lsv scalar-L
Inventory of the scalar library:
in 1: barcode LTO029L3
2: barcode LTO017L3
3: barcode LTO006L3
4: barcode LTO005L3
5: barcode LTO027L3
6: LTO010L3 barcode
7: barcode LTO004L3
8: barcode LTO001L3
9: barcode LTO003L3
10: barcode LTO028L3
11: barcode LTO030L3
12: barcode LTO024L3
13: barcode LTO026L3
14: barcode LTO011L3
15: barcode LTO012L3
16: barcode LTO009L3
17: barcode LTO020L3
18: barcode LTO002L3
19: barcode LTO008L3
20: barcode LTO007L3
21: barcode LTO016L3
22: LTO019L3 bar code
23: barcode LTO018L3
24: barcode LTO022L3
25: barcode LTO023L3
26: barcode LTO025L3
27: barcode LTO021L3
28: barcode LTO014L3
29: barcode LTO015L3
30: barcode LTO013L3
OB > unlabelv reader1-d-f 1
Error: could not open file backup image dbsora17: / dev/sg0: undefined error (NDMP client)
OB > pingh dbsora17
dbsora17 (address 10.159.4.117): Oracle Secure Backup and NDMP services are available
OB > scalar pingd
Error: cannot open library scalar - undefined error
Error: could not open the reader1 - error undefined drive
Error: could not open the player lecteur2 - undefined error
I have following configuration for SecureBackup:
-----
OB > lsh
dbsora98 admin, mediaserver, customer service (via OB)
dbsora17 mediaserver, customer service (via OB)
customer (via OB) dbsora90 in service
customer (via OB) dbsora92 in service
customer (via OB) dbsora94 in service
...
-----
OB > lsd
scalars in the library service
reader1 disc 1 in service
Player 2 lecteur2 in service
Library vl_cbs3 in service
disk 1 vd_cbs3_1 in service
Player 2 vd_cbs3_2 in service
...
-----
OB > lsd - lvg
scalar:
Device type: library
Model: [No]
Serial number: ADICA0C0486A17_LLA
In service: Yes
Debug mode: no
Barcode reader: default (selected material)
Barcode required: no
Auto clean: no
Cleanup interval: (undefined)
Clean using voids: no
Unloading required: Yes
Ejection type: auto
Volume write-on min: 0
UUID: 8c28a2c0-05eb-102e-8523-000b5df3a54e
Annex 1:
Host: dbsora17
Raw device: / dev/sg2
Connection type: SCSI
Data from the survey:
Seller: ADIC
Product: Scalar i500
Firmware: 320G
Serial number: ADICA0C0486A17_LLA
Account / address:
1 mte: 1
to 30: 4096-4125
EEI 6: 16-21
DTE 2: 256-257
Moves:
From mte, in: mte 0 to 1 EEI 1 dte 0
Of course, to: mte 0 to 1 EEI 1 dte 1
Of the iee to: mte 0 to 1 EEI 1 dte 1
DTE, at: mte 0 to 1 EEI 1 dte 1
Ok_ops: move = 1, reserve = 1 sense_dev = 1 sense_ele = 1 unload_any = 1, sense_dev_range = 1
Characteristics of the device: two_d = 0, is_120 = 0, fake_mte = 0, fake_iee = 0, one_target = 0
State of the barcode reader: present
Display: none
DTE 1: target 1 lun * reader1 (gross/dev/sg0 device name)
WARNING: dte 1 may be misconfigured. (bus 0) is to target 0, lun 5,.
which does not match the information provided by the library.
DTE 2: target 2 LUNs * lecteur2 name (device gross/dev/sg1)
WARNING: dte 2 may be misconfigured. (bus 0) is to target 0, lun 5,.
which does not match the information provided by the library.
WARNING: bus info unknown or not installed in car
reader1:
Device type: Ribbon
Model: [No]
Serial number: 1210151292
In service: Yes
Library: scalar
DTE: 1
Automount: Yes
Error rate: 8
Frequency of application: 131072 KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Blocking max factor: (default)
The current band: [unknown]
Use the list: all the
In-car use: no
Cleaning required: no
UUID: b9b3adca-05eb-102e-8523-000b5df3a54e
Annex 1:
Host: dbsora17
Raw device: / dev/sg0
Connection type: SCSI
Data from the survey:
Vendor: IBM
Product: ULTRIUM-TD3
Firmware: 64 0
Serial number: 1210151292
Band status: offline
Hardware compression: on
Last reading was: uncompressed
Hardware encryption: not available
Maximum block size: 1048576
lecteur2:
Device type: Ribbon
Model: [No]
Serial number: 1210206701
In service: Yes
Library: scalar
DTE: 2
Automount: Yes
Error rate: 8
Frequency of application: 131072 KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Blocking max factor: (default)
The current band: [unknown]
Use the list: all the
In-car use: no
Cleaning required: no
UUID: f6f3578a-05eb-102e-8523-000b5df3a54e
Annex 1:
Host: dbsora17
Raw device: / dev/sg1
Connection type: SCSI
Data from the survey:
Vendor: IBM
Product: ULTRIUM-TD3
Firmware: 64 0
Serial number: 1210206701
Band status: offline
Hardware compression: on
Last reading was: uncompressed
Hardware encryption: not available
Maximum block size: 1048576
vl_cbs3:
Device type: library (virtual)
Model: [No]
Serial number: ffd1f914
In service: Yes
Debug mode: no
Barcode reader: default (selected material)
Barcode required: no
Auto clean: no
Cleanup interval: (undefined)
Clean using voids: no
Ejection type: auto
Volume write-on min: 0
UUID: 9723c63c-1379-102e-871c-000b5df3a54e
Annex 1:
Host: dbsora98
Raw device: / oracle/data/osb/cbs3/vl_cbs3
Connection type: SCSI
Data from the survey:
Seller: Oracle
Product: VL - 1
Firmware: 2.0
Serial number: ffd1f914
Account / address:
1 mte: 0
is 99: 4096-4194
EEI 0
5 dte: 512-516
Moves:
Of mte, in: mte 0 dte of IED 0 be 0 0
Of course, to: mte 0 to 1 EEI 1 dte 1
Of the iee to: mte 0 to 1 EEI 1 dte 1
DTE, at: mte 0 to 1 EEI 1 dte 1
Ok_ops: move = 1, reserve = 1 sense_dev = 1 sense_ele = 1 unload_any = 1, sense_dev_range = 1
Characteristics of the device: two_d = 0, is_120 = 0, fake_mte = 0, fake_iee = 0, one_target = 0
State of the barcode reader: present
Display: none
DTE 1: target * lun * name vd_cbs3_1 (/ oracle/data/osb/cbs3/vd_cbs3_1 of raw device name)
DTE 2: target * lun * name vd_cbs3_2 (/ oracle/data/osb/cbs3/vd_cbs3_2 of raw device name)
DTE 3: target * lun * name vd_cbs3_3 (/ oracle/data/osb/cbs3/vd_cbs3_3 of raw device name)
DTE 4: target * lun * name vd_cbs3_4 (/ oracle/data/osb/cbs3/vd_cbs3_4 of raw device name)
DTE 5: target * lun * name vd_cbs3_5 (/ oracle/data/osb/cbs3/vd_cbs3_5 of raw device name)
vd_cbs3_1:
Device type: (virtual) tape
Model: [No]
Serial number: ffd73bcc
In service: Yes
Library: vl_cbs3
DTE: 1
Automount: Yes
Error rate: 8
Frequency of application: 1024KB (1048576 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Blocking max factor: (default)
The current band: [unknown]
Use the list: all the
In-car use: 6 seconds
Cleaning required: no
UUID: bcf9d02c-1379-102e-871c-000b5df3a54e
Annex 1:
Host: dbsora98
Raw device: / oracle/data/osb/cbs3/vd_cbs3_1
Connection type: SCSI
Data from the survey:
Seller: Oracle
Product: VT - 1
Firmware: 1.1
Serial number: ffd73bcc
Band status: offline
Hardware compression: off
Last reading was: compressed
Hardware encryption: not available
Maximum block size: 2097152
vd_cbs3_2:
Device type: (virtual) tape
Model: [No]
Serial number: fffc725c
In service: Yes
Library: vl_cbs3
DTE: 2
Automount: Yes
Error rate: 8
Frequency of application: 1024KB (1048576 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Blocking max factor: (default)
The current band: [unknown]
Use the list: all the
In-car use: no
Cleaning required: no
UUID: bd1d73ce-1379-102e-871c-000b5df3a54e
Annex 1:
Host: dbsora98
Raw device: / oracle/data/osb/cbs3/vd_cbs3_2
Connection type: SCSI
Data from the survey:
Seller: Oracle
Product: VT - 1
Firmware: 1.1
Serial number: fffc725c
Band status: offline
Hardware compression: off
Last reading was: compressed
Hardware encryption: not available
Maximum block size: 2097152
...
-----The virtual library, you have set is not like what that it is taken in charge, so that should be deleted.
Certificate errors suggest a time synchronization problem, so I would check all systems use NTP and their time is just fine.
Thank you
Rich
-
I want to hide my speaker notes from the hearing, but I want to see them in my mac.
my version is 6.6.2 (2571).
What is possible to do?
Keynote > Preferences > slide show > display > select the option for: presenter display enable
Press the X on the keyboard when in the game, to Exchange on the screens.
-
"Dual monitor Expand" doesn't work is not for t5740 with WES 2009.
We do the following procedure to configure all our years TC bi-ecrans.
1. flash the tC, customize it to our needs.
2 join to the domain
3. log in with Admin Creds, change default display settings: display properties-> settings tab-> "extend my desktop windows on the second monitor"-> apply
4 validation EWF, logoff
5. now, Login as any domain user for the workstation mode extended.
works great for t5630 (xpe sp3) & t5630w (WES 2009) & t5740 XPF 2002BUT it fails with t5740 with WES 2009
the above parameters are only to the Admin account, any other user domain/local get one active monitor.
can write us any script/group policy settings to do
Could someone help me solve this problem.
Thanks in advance
found an easy way without multi-display software
Requirements: HPDM AGENT installed on TC
c:\windows\xpeagent\hpdmAgent.exe
c:\windows\xpeagent\hpdmmc.exe the set display = rate of 1280 * 1024 = 60 depth = 32 sm = primary r = pm
put the following two lines of code in a file bat in logon scripts
source: found this in the task log hpdm "display" - file and registry settings
Maybe you are looking for
-
Cost of calls in the us.
By minute how much a call to a line set in the United States cost? Since my Windows laptop? From my iPad? Thanks, cb
-
Don't want Phoenix I7: Start 10 menu appears not
I recently tried to install Corel X 3 using XP compatibility mode, but it did not work and damaged my menu of the Start button. Everything seems to be OK, but clicking on the Windows icon results in a brief "Hourglass" and no activity. I tried a syst
-
Unable to connect the computer to the network
original title: networking issues According to me, only missing me something very simple. I have 5 computers connected between them and all, but we can speak with others. 3 computers running Win XP and Win 7-2. Bart is running Win XP and is connected
-
Iconia one 7 geschenk bekommen
Hallo kann mir helfen, ein Iconia one 7 gechenkt bekommen habe someone vieleicht. beim q asked er mich nur nach 2 Fremdsprachen Englisch oder Spanish. Aber ich möchte Deutsch, mach ich das um wie're zu change? I think auch nicht das're gibt nur 2 lan
-
Whenever I try to connect to the internet using yahoo or msn, screen get a bunch of lines through it, and I have to continue to try to get a page of ledigible