2410. WE light blinks and the hourglass stays on. He's stuck in this mode.

Similar Questions

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• The lights blink and the error error message: 0x887dd03a

  I have a printer all-in-One of 2600.  At random, all the control panel lights will be flashing quickly, and display "blue out" and read only this error message "error: 0x887dd03a.  I can always print, scan or copy with the printer, if I hit the power button and let it charge.  But shortly after that work is done, it will start to Flash again and display the error message.  I run a new computer with Windows 7, but this was happening on my old computer running windows XP.  I thought a fresh load of software and CPU would solve the problem, but it still exists.  Any ideas why this might be happening?

  the solution,

  block protocol SMB from your computer to the printer.

  -assign a staic ip address to the printer

  -create two outgoing roles in windows firewall 7 - one for the tcp - one for udp

  -block tcp 139 and 445 on the ip of the printer

  -block udp 137 and 138 to the ip of the printer

  -forget the card slots

  andreashabl

• The red light blinks and the battery is connected

  I have the adapter plugged in to charge my battery and it flashes red, then how to stop flashing?

  I would contact the customer to the manufacturer of your computer for this problem.

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Satellite A200 - 19K: double keyboard lights up and the mouse no longer works

  Hello

  I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.
  I can't find why it does this in the manual and what is the purpose of light with symbols on it.

  The symbols have a purpose. Thank you very much

  Hello

  As far as I know that not all mobile A200 were shipped with this function called TouchPad/Dual Mode Pad touchpad

  The dual-mode tablet buttons provide many different functions such as:

  1.) button to -> it toggle cursor mode and the mode button.
  When you switch the button mode button flashes blue and the mouse does not work

  (2.)-> volume button increases or decreases the volume of the speakers and headphones

  (3.)-> e-mail button starts you mailbox to receive and send emails

  4.) button ConfigFree -> starts the ConfigFree tool

  5.)-> Windows Vista Photo Gallery button starts the Windows Vista Photo Gallery

  The other three buttons to the bottom of the trim can be configured with different functions.

  Please refer to the properties for pad synaptic dual for more details!

• My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

  My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  
  According to the graphics card on your computer, these can be alternatives.
   
  
  Right click on the desktop | Graphics options | Rotation.
   
  
  Right click on the desktop | Screen resolution | Orientation.
   
   
   
  
   

• my laptop is insafe mode and now my screen is huge and I have no sound while it is in this mode... How do you turn off safe mode

  original title: safe mode

  my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?

  Hello

  audio drivers are not loaded in Mode safe

  read this to get out of Safe Mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• Satellite L500-1XL - does boot and the screen stays black

  Hello

  I have a Satellite L500-1XL, when I turn it on the fan and lights and the hard drive light blinks several times then nothing, he's not going to the Toshiba screen remains black screen, tried ext monitor but still nothing.

  The fan always runs very quietly and the hard drive is running in, I put the hard drive in an another L500 and it is very good and can be accessed without problem, it has only 1 stick of 2 GB of RAM DDR3 and the other L500 I is DDR2 so I can't try to change the RAM. If I remove the ram should it beep or does only desktop computers do this? Mine does nothing when it is removed.

  Any help would be very useful, thank you!

  Hi gazzdowzell,

  If your laptop doesn t boot it seems to be a hardware bad working it could be everything, motherboard, BIOS, CPU, etc and it is difficult to say what exactly is the problem.

  First of all, I would like to try this:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work, please contact a service provider authorized in your country. If your laptop is under warranty, repairs are free.
  In addition if you remove the RAM and the beep of t n for laptop, it seems to be another problem. If you have removed the RAM module would be defective, the computer would have a beep.

  Good luck!

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• Laptop power light blinking and won't turn on

  I have a laptop HP Pavilion 1045DX M6 and I recently tried to plug it into a screen RGB, analog and I saw a spark and the laptop off.

  During this time, I ran the laptop directly from the adapter without battery because I don't really use it.

  If the laptop is turned off and I tried to turn it back on and nothing happened. The charge indicator light turned off even though it was still plugged. I thought that maybe the power adapter does work more or something, but I tested it with a voltmeter and there was still power in.

  So I decided to put the battery in the laptop was able to turn on, and after a while, it an area that I never felt heat it before was really hot and later felt like something was burning.

  But anyway, when it started, the screen resolution was really weak and made a maximum brightness. When the laptop end of initialization, it randomly started to install drivers (such as WLAN rapid storage and intel) and Yes. Sound does not work either. I tried to connect the laptop back and battery does not charge.

  I turned off and took out the battery and tried to run the AC adapter only but the light flickered constantly and when I press on it, the WiFi (F12) button light on for a second then back off the coast. I also hear that high frequency noise I have ever heard before somewhere in the laptop.

  I've done a hard reset with no luck. Any suggestions? Thank you!

  Hi @djstar12 ,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have attempted to connect an analog RGB display and you saw a spark. The laptop off and then will not re-start. (the battery has been removed at the time). The light on the adapter was not turned on so you checked the voltage on the adapter and it was fine.

  You tried power turn it on with the battery power and booted up with display dim and started to install the drivers, but you have noticed, it was getting very hot in a specific area. Also, you do not have audio and the battery does not charge.

  Once again, you removed the battery and tried so that it starts with the adapter and the light on the adapter flashes continuously. You also hear the treble and when you tried to activate the wireless, he came for a second and then powered back off.

  The only thing that I can suggest to test the adapter and the equipment.

  Using and testing the power adapter AC

  Test of hardware failures (Windows 7, Vista).

  If you determine that it must be replaced or decide to buy a replacement, you can contact HP technical support for other options.

  Please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number Plan of the Technical Support site .

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• BlackBerry Storm 9530 to Smartphones unloacks by itself after 1 min and the screen stays on

  Hey all the... my storm unlocks by itself after I click the button locking... the screen remains so forever.  Ive had this phone for a few months and just noticed this today.  Someone knows how to do ten this?

  If it is a new problem, there is one thing to try first to see if that solves the problem - do a battery pull.  Just open the back of the phone and while the phone is turned on, remove the battery for 30 seconds, reinsert the battery and wait for the phone to reboot (~ 5 minutes).  If this does not help, the next step is to check the settings of your screen.  Go to Options > keyboard/screen.  Check that your backlight delay is set on an appropriate delay time (e.g. 30 or 45 seconds) and automatically Dim backlight is enabled.

  Hopefully that will help!

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW