SX10 with CE8.2

Similar Questions

• SX10 with microphone table of spare parts or simply with CTS-MIC-TABL20?

  Hello

  We have the setting of the unit in a room of 8 people with a high ceiling, so there is some ongoing echo. As many speakers, I think that I need a micro-table without worrying about the size of the room.

  Is it possible to use spare parts table microphones or is the SX10 limited to the CTS-MIC-TABL20?

  What is the good work of CTS-MIC-TABL20?

  Thank you!

  The microphone is recommended is always the best, like using a 3rd party micro can potentially cause problems if something is not connected correctly.  The CTS-MIC-TABL20 uses a connector 3.5 mm 4, instead of the 3 typical that most microphones.  You can possibly try and use a 3rd party microphone, see 3rd - party - microphones - cisco - telepresence for where others have tried to connect their own MIC for details of use with telepresence systems that use the plug 3.5 mm 4pin such as the C20 and SX20, SX10.

• SX10 with CMR

  Hello

  SX10 standalone can call Cloud CMR?

  Concerning

  Leonardo Santana

  Hello

  It's unfortunately a limitation of supply, see page 6 of the CMR-Cloud deployment guide:

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/Sol...

  -Jonathan

• SX10 and support with key 8/10

  With the new SX10 user interface seems to be the remote control and probably the web interface.

  Can we pair it the SX10 with a tactile Unit 8 or 10 touch?

  If this is not the case now, it is planned?

  Hi Richard,

  From now SX10 supports 6 TRC remote control with it.

  It can support touch screen in the future, but there is no confirmation about this.

• SX10 and H.323 by highway

  For the record, is not on the track express-E and CUCM...

  I a SX10 recorded a highway of VCS and have run into some problems when I call a Polycom RMX customers. If I call from a SX20 forced to call H.323, everything works fine, but with SIP my client will receive my audio.

  As the SX10 cannot force H.323, there is simply not yet this option, I would like the VCSE make interoperability for me. How can I configure the VCSE so that it always uses the H.323 when a specific end point registered calls him a specific endpoint or MCU point? Is this possible? The RMX meets SIP calls, if she only answered calls H.323 the VCSE course automatically would make interoperability.

  Appreciate any reply :)

  / Christian

  You should pass the SX10 at CE8.2 that just came out, it adds support for H323 for the SX10 and should solve your problem of having to use SIP only, here are the Release Notes for CE8 for reference.

  It is not an easy way to force a call using this device or this Protocol, if the calling endpoint can answer using the Protocol it is called, it will be. Yoi simply can't do with just a search rule, you must create an entirely second course area between your VCS-C/E, having active H323 and have the rule search - C for this new game of the Polycom alias box and have a higher priority than your other crossing area.

• SX20 FAILURE OF CONFERENCE

  Hello

  I have the (unlicensed multisite) SX20, SX10, DX80 and JABBER for iphone Registred on CUCM and IM & presence,

  I tried to make a video call with Jabber, then I added the second participant DX80 with voice only, but when I try to add the third participant SX10 with voice only to the Conference call has failed.

  You can't, not without the MS license installed.

  The SX20 allows adding an audio call when, in a videoconference to point without the MS license .

  It does not allow two audio calls. So, if you connect to video point, you can add an audio call.

  If you connect to audio point, you cannot add a second audio-only call. It is a hardware limitation, not software.

  /Jens

  Please note the answers and mark questions as "answered" as appropriate,

• Downgrade DX80

  Hello

  We have deployed with CE8.2.1 DX series.

  Do you know how to switch the DX to sipdx80.10 - 2-5-60 no the cucm?

  Kind regards

  Fird

  Take a look at to perform a conversion between THIS software and based on Android starting on pg 16.

• SX10 problem with sending audio with the video presentation

  I recently deployed a Cisco SX10 and found a fault, that I can't understand. When sharing content with extreme of end users, they can see the video but don't get no audio. I checked the settings and I'm confused as to what is misconfigured.

  I checked the bases, wiring, volume, and the settings in the codec it resembles a simple set up. When I introduce locally I have the same problem - no sound from the TV.

  Any ideas?

  Looking at the Guide of Installation SX10 on pg 5.  The SX10 is not an audio connector dedicated to the VGA input, since doesn't send VGA audio you need an additional input for audio.  I test using the HDMI input, and I heard audio locally and on the far - end, since HDMI will send video and audio together.

• SX10 T7.1 with Expressway MRA

  Hi all

  Does anyone know if it is possible to make a SX10 on Internet with Expressway ARM activity?

  The only options I get for the supply are "CUCM" and "VCS".

  If I select "VCS" and enter the address of the highway e and I look in the log, I see the SX10 SRV _sip_ research, but not fundamentally a _collab-edge_tls. SRV lookup.

  This makes me think that T7.1 does not work with Expressway - is that correct?

  Thank you very much!

  As mentioned in Jamie, you'll want to upgrade your SX10.  You must run TC7.2 or higher to get the "CUCM" highway"option.  It's in the TC7 Release Notes on pg 25.

• Edge router with CUCM/Tel Telepresence SX10 Server Mirotik / Tel conductor

  Hello

  I have a client with 15 sites connecting with Mikrotik router-Board of Directors.

  I have to questions of implementation, in this network, a video-conferencing solution with:

  15 Telepresence SX10, one for each sites

  CUCM

  Cisco Telepresence Server

  Conductor of Cisco Telepresence

  The Cucm, Serveer telepresence and the conductor will be installed on the main site.

  Thank you

  Yes, I also prefer this option if your go direction CUCM because he has already included as an option for CUCM licenses (multiparty license of Cisco) and lower costs.

  Kind regards

  Acevirgil

• Win XP will not find the driver for my Canon Sx10 camera.

  Windows XP will not load the driver for my Canon SX10 camera. I had the camera for 3 years and have never had a problem with this load. I reinstalled XP and the same problem. Windows recognizes the camera but will not load the driver for it.

  I'll in Device Manager through the update hardware wizard I have try to install the driver manually, but I don't get the option of all available drivers.

  There is no drivers for this camera online, because I thought that Windows has the driver for this device.

  Thanks for the help,
  Ian

  Thanks for the reply. I reinstalled windows and it works fine now. I didn't want to go through the hassle of reinstalling everything.

  Ian

• Cannot disable the microphone 1 on SX10 TC7.2.0

  Morning!

  Here, we have a SX10 recently upgraded to TC7.2.0, both microphones work perfectly but the problem we have is we cannot cut the microphone 1 (one internal), we need mute because the codec is somewhat less a screen with speakers to the codec.

  I tried to mute to ' Configuration > system setup > Audio > Microphone Mode 1 input > Off "but not working even after a reboot of the device.

  I tried to disable it in CLI with the command ' xconfiguration Audio input Microphone Mode: Off "but doesn't.

  Can someone give me a hand with this problem?

  Best regards and thanks for your help.

  Hello - I just tested this with free TC7.2.0 software.  The version number is TC7.2.0.aea6651.

  I tested during a call and used the web interface to Configuration > System Configuration > Audio > input Microphone 1 Mode > Off

  I tested it with a table 20 Mic and without.  In both cases, the internal mic has been disabled successfully by the interface web and delivered to market successfully.

  To check this, I typed the two microphones with my fingernail.  The location of the internal MIC is just to the lower right of the camera that you look at the front the SX10. It shares the location with the infrared sensor.

  I could easily hear the tapping of my nail through the speakers of the other system I was calling.  Disable "Microphone Mode 1:" and I couldn't hear the tapping.  Turn on "Microphone Mode 1:" and I could hear the tapping very well.

  So I think that it works correctly.

• SX10 - how to access the web interface behind a firewall

  Howdy

  I have a very simple configuration, router and behind her SX10. I can't access the web interface of the remote unit. Is there a port that I need to activate or something?

  When the device was connected directly to the modem, with the public IP address, I was able to connect to the web interface.

  any suggestions here?

  I enter anything in the field AllowRemote.

  Thanks in advance!

  Web interface can be accessed using HTTP ether (80) or HTTPS (443).  To you how you want to deploy, but you can use NAT on the router, port forwarding, or even put the SX10 in DMZ on the router.

• Encrypted SX10 cannot connect to the other encrypted SX10 internall

  Hi all

  I have 2 SX10s and can not figure out how encryption works for the latter. They are all two registrants to our VCS - C and unable to connect with each other. The two systems are active encryption and not 'Best Effort'. I think this might have to do with our VCS or our team of safety engineers. Help, please...

  Thank you.

  Hello

  May be small but had to check, are the units recorded over TLS? If not, can you try to do? The certificates should not be required unless TLS check is checked.

• SX10 SIP configuration

  Hello

  I just got a cisco telepresence SX10 device uses the SIP protocol only and I have no experience with this at all. Older devices that I worked with used H323 Protocol which is very easy to configure. Looking for help on how to configure the SIP. Your help will be greatly appreciated

  Thank you

  The Radvision MCU was implemented to support SIP?