Encrypted SX10 cannot connect to the other encrypted SX10 internall
Hi all
I have 2 SX10s and can not figure out how encryption works for the latter. They are all two registrants to our VCS - C and unable to connect with each other. The two systems are active encryption and not 'Best Effort'. I think this might have to do with our VCS or our team of safety engineers. Help, please...
Thank you.
Hello
May be small but had to check, are the units recorded over TLS? If not, can you try to do? The certificates should not be required unless TLS check is checked.
Tags: Cisco Support
Similar Questions
-
Why other computers cannot connect to the internet with my ad - hoc connection?
Hi all! Here's my situation.
My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
We have only an Ethernet however.Here's my situation.
I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.But here's the kicker, when I don't put no security on the network, everything works fine.
How do I create an ad hoc ICS with security network and have not really work?
Thank you guys!Hello
Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!
Before I continue, I would like to collect some personal information on the issue.
1. what security software is installed on your computer?
2. share your protected password put on or off?
The sharing tab is not available if you have only a WLAN card.
Method 1:
Follow the link below and set the ad hoc network.
Set up a computer-to-computer (ad hoc) network
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network
Set up a wireless network without router
Method 2:
After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).
(a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.
(b) click on the connections tab, and then click never establish a connection.
(c) click on LAN settings.
(d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .
(e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.
If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.
Method 3:
Follow these steps and check if that helps.
(a) click Start, type Control Panel in the search box, press ENTER.
(b) click on network and sharing Center, click change advanced sharing settings in the left pane.
(c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.
(d) select (dot), turn on password protected sharing.
Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:
Set up a shared Internet connection using ICS (Internet Connection Sharing)
Change the settings for ICS (Internet Connection Sharing) Internet
More information on:
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
Reply back with the results. I'd be happy to help you further.
-
Satellite P750: Unable to connect to the other PC with WLAN
Satellite P750 was working fine until yesterday.
Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
However, I can connect to the internet ok.
Other pc can not see me either.* When I use wired everything is ok *.
I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.Can anyone help please?
Hello
You should enable the option called Ad-hoc to peer option in your WLan settings!
Go to network connections
Select connections-> properties-wireless
Add the new network
Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network -
established - VPN connection, but cannot connect to the server?
vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4
Thank you
ASA Version 8.2 (1)
!
hostname ciscoasa5505
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.0.3 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 208.0.0.162 255.255.255.248
!
interface Vlan5
Shutdown
prior to interface Vlan1
nameif dmz
security-level 50
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS lookup field inside
DNS server-group DefaultDNS
192.168.0.4 server name
Server name 208.0.0.11
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service TS-780-tcp - udp
port-object eq 780
object-group service Graphon tcp - udp
port-object eq 491
Allworx-2088 udp service object-group
port-object eq 2088
object-group service allworx-15000 udp
15000 15511 object-port Beach
object-group service udp allworx-2088
port-object eq 2088
object-group service allworx-5060 udp
port-object eq sip
object-group service allworx-8081 tcp
EQ port 8081 object
object-group service web-allworx tcp
EQ object of port 8080
allworx udp service object-group
16001 16010 object-port Beach
object-group service allworx-udp
object-port range 16384-16393
object-group service remote tcp - udp
port-object eq 779
object-group service billing1 tcp - udp
EQ object of port 8080
object-group service billing-1521 tcp - udp
port-object eq 1521
object-group service billing-6233 tcp - udp
6233 6234 object-port Beach
object-group service billing2-3389 tcp - udp
EQ port 3389 object
object-group service olivia-3389 tcp - udp
EQ port 3389 object
object-group service olivia-777-tcp - udp
port-object eq 777
netgroup group of objects
network-object host 192.168.0.15
network-object host 192.168.0.4
object-group service allworx1 tcp - udp
8080 description
EQ object of port 8080
allworx_15000 udp service object-group
15000 15511 object-port Beach
allworx_16384 udp service object-group
object-port range 16384-16393
DM_INLINE_UDP_1 udp service object-group
purpose of group allworx_16384
object-port range 16384 16403
object-group service allworx-5061 udp
range of object-port 5061 5062
object-group service ananit tcp - udp
port-object eq 880
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389
outside_access_in list extended access permit tcp any host 208.0.0.164 eq https
outside_access_in list extended access permit tcp any host 208.0.0.164 eq www
outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field
outside_access_in list extended access permit tcp any host 208.0.0.162 eq www
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group
outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777
outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000
outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group
outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0
Ping list extended access permit icmp any any echo response
inside_access_in of access allowed any ip an extended list
permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
access-list 1 standard allow 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
logging buffered stored notifications
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool
192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 1 192.168.0.0 255.255.255.0
alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255
public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255
public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255
static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1
Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.255.0 inside
http 192.168.0.3 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt noproxyarp inside
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 108.0.0.97
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 20 match address outside_20_cryptomap
card crypto outside_map 20 set pfs
peer set card crypto outside_map 20 69.0.0.54
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life no
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 1
life no
Telnet timeout 5
SSH timeout 5
Console timeout 0
identifying client DHCP-client interface dmz
dhcpd outside auto_config
!
dhcpd address 192.168.0.20 - 192.168.0.50 inside
dhcpd dns 192.168.0.4 208.0.0.11 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal group anyconnect strategy
attributes of the strategy group anyconnect
VPN-tunnel-Protocol svc webvpn
WebVPN
list of URLS no
SVC request enable
encrypted olivia Zta1M8bCsJst9NAs password username
username of graciela CdnZ0hm9o72q6Ddj encrypted password
tunnel-group 69.0.0.54 type ipsec-l2l
IPSec-attributes tunnel-group 69.0.0.54
pre-shared-key *.
tunnel-group 108.0.0.97 type ipsec-l2l
IPSec-attributes tunnel-group 108.0.0.97
pre-shared-key *.
tunnel-group anyconnect type remote access
tunnel-group anyconnect General attributes
remote address pool
strategy-group-by default anyconnect
tunnel-group anyconnect webvpn-attributes
Group-alias anyconnect enable
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the icmp
!
service-policy-international policy global
: end
ASDM location 208.0.0.164 255.255.255.255 inside
ASDM location 192.168.0.15 255.255.255.255 inside
ASDM location 192.168.50.0 255.255.255.0 inside
ASDM location 192.168.1.0 255.255.255.0 inside
don't allow no asdm history
Right now your nat 0 (NAT exemption) follows the access list:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.
Then try to add an entry to the list of access as:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0
It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.
-
Help! Safari cannot connect to the server
I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.
I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...
You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.
Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.
Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.
Step 1
VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.
Step 2
When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
/Library/LaunchDaemons
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.
There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.
Step 3
In the LaunchDaemons folder, there may be one or more files with the name of this form:
com Apple.something.plist
When something is a random string, without the letters, different in each case.
Note that the name consists of four words separated by dots. Typical examples are:
com Apple.builins.plist
com Apple.cereng.plist
com Apple.nysgar.plist
There may be one or more items with a name of the form:
com.something.plist
Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.
These names consist of three words separated by dots. Typical examples are:
com.semifasciaUpd.plist
com.ubuiling.plist
Sometimes there are items (usually not more than one) with the name of this form:
com.something .net - preferences.plist
This name consists of four words (the third hyphen) separated by periods. Typical example:
com.jangly .net - preferences.plist
Drag all items in the basket. You may be prompted for administrator login password.
Restart the computer and empty the trash.
Examples of legitimate files located in the same folder:
com.apple.FinalCutServer.fcsvr_ldsd.plist
com Apple.Installer.osmessagetracing.plist
com Apple.Qmaster.qmasterd.plist
com Apple.aelwriter.plist
com Apple.SERVERD.plist
com Tether.plist
The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.
Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.
If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.
If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.
Step 4
Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select
▹ Safari preferences... ▹ General
and click on
Set on the current Page
If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.
The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.
Step 5
The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.
Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.
Step 6
This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.
-
A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.
A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB. The printer is running the latest firmware. The PC is running the latest 64-bit drivers with no problems to the host machine printing. The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network. The printer is configured to share with the share name of HPDJ500.
Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer. Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK. At this point, I get an error that says: "Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server. For more information, click Help. »
Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector. This window also disappears as soon as I clear the error message.
Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field. It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message). On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.
How connect to this printer?
Try using the path UNC path of the printer in the Add Printer Wizard.
Add a printer > network printer > connection to this printer ((deuxieme point)
Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path
-
"Cannot connect to the network." When you enter the correct password for wireless network
Hello
I have the HP Photosmart C7200 all-in-One series.
This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem. I have a Verizon FiOS (Actiontec) router. I am trying to connect to it wireless; the network key is using WPA authentication. I followed all the instructions in the quick start guide.
My printer detects my network and application authentication key. I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network. I know that my key is correct; I connect to my router very well through several laptops, PDA, etc. I have reset the settings network default manufacturer and tried without success.
I don't know what kind of trouble shooting I'm supposed to do here. The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.
Your help is greatly appreciated.
Edit: I printed the test report wireless network, here are the results:
Radio on PASS
The radio work PASS
Ethernet cable not plugged in PASS
Network name (SSID found) PASS
Security PASS
The printer settings compatible with the configuration of the wireless router PASS
No filtering IN CASE OF FAILURE
Connected Not work
The signal strength Very low
Other networks detected matching you the network name (SSID) NO.
I know this sounds strange, but try changing channel by channel 11 of the wireless router.
-
I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now. When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc. The itunes gives error me is "make sure that your network connection is active and try again. When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed). I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks. The help and support center will not be to the point after that I click on it. I use windows xp sp3 home edition 2002. I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success. I don't know what to do at this point but to restart the system. Please help, any suggestions? Thanks in advance.
Hi unlucky2013,
Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
WRT54GL establishment cannot connect to the Internet
I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet. Why the hell not? I am writing on the same laptop, using the same ADSL modem and Internet connection. So why don't the router sees it? The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of. I didn't know if he wanted the original preset 'admin' or that I had sometimes back (hours) came the first time that this has been asked. So I tried both. Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet. Power, then turn on the DSL Modem. "I did already too many times to count. And again I say, this direct DSL connection of the modem for my laptop is fine. But when the cable Internet through the router, then the other wire goes to my laptop, no Internet. All the time my DSL modem displays a green light for the Internet. And the router shows a light on the Internet.
I'm too tired to walk any further tonight. Maybe someone has a simple suggestion. I'll check tomorrow.
Thanks for helping this rank amateur.
Try to configure the router manually.
Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.
Follow this link to configure the router with DSL Internet Service.
-
cannot connect to the HP laptop.
cannot connect to the HP laptop. safe mode didn't work or system restore. have windows vista. This error:
C:\WINDOWS\WinSxS
if the other is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support
\x86_microsoft. Windows.gdiplus_6595b64144ccf1df_1.0.6002.18005_none_9e50b396ca17ae07\gdiplus.dllHi mikiduki,
I suggest you do the startup repair that may help you resolve the issue.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Follow the instructions in the link below to perform the Startup Repair.
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsYou can try to disconnect all external devices on the machine, and then start the computer.
Sometimes, an external hardware can also cause the issue during the startup process.Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Cannot connect to the HP connected using Internet Explorer 11
Cannot connect to the HP connected using Internet Explorer 11. When I use another computer that is running a different browser like Chrome, Opera, or Firefox it connects and I can connect without problems.
Does anyone know if HP is working to correct this problem?
I guess he tweaks on ie11, others are able to connect (I just do):
-
Windows cannot connect to the updates server. & Rise of Legends
When I try to update the game by clicking on "check online updates" I get the "Rise of Legends cannot connect to the Internet. A firewall is probably blocking it. to continue, network access, and then click OK. "error.
Game has been installed on the clean Windows 7 install Service Pack 1 on a Compaq Pressario CQ5814.
System AMD E-350 a / 1.6GHz processor
8 GB Ram
64-bit operating system installed.Rise of Legends has been installed fresh
Version: 0.0704.1001.0000.13.0Checked the settings of Internet Explorer and the proxy is set to automatically detect settings.
Trend Micro Titanium Security - legends on the exceptions list.
Without checking all the settings for all programs associated with access to the internet for upgrades. No restrictions occur with other programs.
The program is on the Windows Firewall exceptions list.
Troubleshooting of Windows Firewall detects no problem.
System File Checker detects any missing or damaged file.
Any help would be appreciated.
Hello
Run the Internet connectivity evaluation tool and check the status.
http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
In addition, if you connect to the Internet using a router, it can be a problem with the configuration settings, which requires that the updated settings. To determine if a network connectivity problem is caused by a bad configuration or a problem affecting the router, try bypassing the router by connecting your computer directly to the modem.
-
Hi all
I'm having a problem with the mobility of the extension and CAD.
UCCX 8.0.2.10000 - 41
8.0.2.40000 - 1 CUCM
CAD 8.0 (2)
Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)
When the user logs in the phone itself, there is no question at this point.
When the user goes to sign in CAD, they are presented with the following error:
"You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »
Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.
Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.
The user can then successfully connect to the CSA.
The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.
I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.
A test, I've changed that to "IPV4" only
User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!
Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.
I also found that by setting up a 'line' on the device - the problem is also solved.
HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.
Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?
See you soon,.
Brett
Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).
Hi Brett,
I saw something similar once I installed UCCX 8.x to a customer.
Workaround there had to be a SU installed on the UCCX.
If it helps,
Kind regards
Juan
-
Flash Builder debugger cannot connect to the running application
I've upgraded to Flash Builder 4.5 and now I get the error - old
The Flash Builder debugger cannot connect to the running application.
Ensure that:
1. for applications in the browser, you run the debug version of Flash Player.
2. for network debugging on a mobile device, you have a reliable network of the device connection and 7935 port is open on the firewall of your machine.
Device connection helpI get both on the Simulator (which is being upgraded to the latest version) and try to debug on my real playbook. There are a few other forums of discussion about this that suggest that the default Debug host IP is the usual culprit. However, which is set up correctly. I also added port 7935 firewall.
I am able to ping ip address of my playbook without problem. Any other thoughts on what I might have configured wrong?
Flash Builder 4.5 uses Air 2.6 for iphone and Android, for the moment, we can use only Air 2.5, so the compiler needs a couple of parameters. You have in the ActionScript Preferences tab build package-advanced - forceAirVersion 2.5 and under ActionScript compiler an extra line - swf-version 10
-
Windows 7 Windows cannot connect to the printer error
Hi, since a few days ago I was connected to a network printer and everything was fine. Today, nothing works. I removed the printer thinking that would help (and I could go out and find him), BAD!
I click on add a printer > add a network printer > select the network printer and get a box that says: I need to install a driver from the other machine, then I make him trust, etc blah blah blah, click OK and then get this error.
Windows cannot connect to the printer.
Operation failed with error 0x000003e3
Both machines are running Windows 7 x 64.
I googled all night with no solutions. Please help, I need to be able to print! Thank you!
I solved the problem. I had to join the homegroup computer, was too attached to the printer. Once I did, he saw the printer and installed the necessary driver. I can print now!
Maybe you are looking for
-
Satellite A300-23F - I need a new PC laptop battery
Hello My laptop battery has reached a level where it will not work for a minute.I need a new laptop for my laptop battery but the problem is where to buy for this SATELLITE A300-23F model PSAGCE and which battery to buy. any ideas. Welcome.
-
My intention is to have the on-Board Unit (ATMEGA32) located in a remote place, somewhere over the internet (connected via Ethernet) connected (via CANBUS) for the fuel cell system for the measurement data (current and the temperature of the fuel cel
-
Generate the event when the focus lost
Hello is there a way to capture an event when a textbox control lose focus? Thank you.
-
I would like to know how to determine if the pc has restarted because power is triggered? the event logs can prove?
-
Following a botched repair and subsequent not real 7install to my laptop HP G62-107SA Windiws, I decided to order a Kit of HP recovery. Disc 1 seems to install fine without error messages, then the application disc 2 system. When disk 2 is inserted,