Symantec TDI and NDIS drivers are not compatible. Impossible to uninstall

Similar Questions

• After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

  After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

  Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

  See you soon,.
  Jerry

• Series Deskjet 1000 - J110 printer but drivers are not compatible with Mac OX 10.4.11

  I bought a Deskjet 1000 Printer series - J110 printer but drivers are not compatible with Mac OX 10.4.11, which is the mode of systemon my macbook. What can I do to solve the problem?

  I'm sorry, but you won't be able to use it with Mac OS 10.4, this model is supported by Mac OS 10.5.8 and above.

  Most of the latest models sold today is supported by 10.5 and above.

• your video card or drivers are not compatible with media center

  When I opened my media center theres a message "your video card or drivers are not compatible with media center" I already tried the solution Center but still cant fixed. pls help me, thanks.

  Hi butch okoy,.
   
  Try the steps listed in the section below to resolve this issue.
  You may receive an error message "your video card or drivers are not compatible with Media Center" when you start Media Center in Windows XP Media Center Edition 2005

• Soundbooth gives an error message when launching say that my video drivers are not compatible

  Soundbooth gives an error message when launching say that my video drivers are not compatible

  Original title: Adobe soundbooth cs5 video drivers

  Hi Mike,.

  To update the drivers, then check if it helps. Follow the steps in the link given below.
  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN 

• After modernizing Ideacentre B320 to Windows 8 broadcom bluetooth or drivers are not compatible

  Original title: ideacentre B320 - Windows 8
  I upgraded Ideacentre B320 to Windows 8 but my bluetooth broadcom or the drivers are not compatible

  Try this,
  http://www.Broadcom.com/support/Bluetooth/update.php

  in my Vaio Z13 the old v6.3 of broadcom drivers did not work, but they are now ok

• VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Ouch. I just started to do some Win Phone 8 and development Win, and all simulators are needed for development.

  This means that a dev to Win8 may only work on their host... I'm sure it would work in a virtual machine.

  Can I make for happy? (Hyper V might have to win here... sigh).

  VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Once you install the Hyper-V role on your host, your host is no longer running Windows 8 as the native operating system.  It runs Hyper-V as the native operating system, and Windows 8 runs as OS management within a privileged under Hyper-V VM.  With the Hyper-V role installed, * everything * runs in a virtual machine under Hyper-V.

  So to run a virtual machine under my computer in Windows 8 under Hyper-V, you must be able to run a nested VM.  It's possible with Hyper-V, the hypervisor host, but with the updates in custody, I mentioned above.

• My browser is malfunctioning and device drivers are not installed code 28 for Simple PCi communications controller.

  Original title: my browser does not correctly code 28

  Hello

  my browser is malfunctioning Device drivers are not installed code 28.

  Details that are in Device Manager

  PCi Simple communications controller

  Another property

  Harware IDS

  Value

  PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086 & REV_02

  PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086

  PCI\VEN_8086 & DEV_29C4 & CC_078000

  PCI\VEN_8086 & DEV_29C4 & CC_0780

  Thank you, Kat

  Hi Kat,

  1. what web browser do you use?

  2. are you unable to go online?

  3. have you made a recent software or hardware changes to the system?

  This error indicates that the drivers for the device are not installed.

  The ID of the seller seems to be related to the drivers of Intel.

  You may be prompted to provide the path of the driver. Windows may have the driver built-in. If you are prompted for the driver and you don't have it, you can try to download the latest version of the driver from the computer or the device manufacturer's Web site.

  You can also try to download the latest version of the computer manufacturer's website Chipset drivers and check if it helps.

  Updated a hardware driver that is not working properly

  For more information, see the article:

  What to do when a device is not installed correctly

  Hope the helps of information.

• Dell N5010 network adapter drivers are not compatible with windows 7 (32 bit)

  Hello

  I have laptop dell n5010, I installed windows 7 ultimate (32 bit). but the network drivers are not getting installed on this operating system. demand for the windows 7 or windows vista 64-bit. any solution to this problem?

  http://support.Dell.com/support/downloads/index.aspx?s=DHS&CS=19

  Go to Dell over the link for Windows 7, Drivers etc.

  If Dell does not have them, you're out of luck.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• XP Media Center says video card or drivers are not compatible

  Original title: Hi everyone__hope you can help me___

  I have xp media center edition 2005

  with a jury of hauppauge wintv-pvr

  When I opened MCE watching television he says video card or driver is not compatible with media Center

  I can't find the driver for it

  and do not have a video card that I know

  can someone help thaks

  Thanks for the info, rabjhop.
  As I suspected, the weak link is your graphics card integrated - GMA910GL of Intel is not enough juice (nor has it required WDDM WHQL certified drivers) to properly support DirectX (or a few other things) entirely in hardware (not on Vista or Win7.)  Even the GMA950 chip had problems in Media Center (go all the way back to Media Center 2005); the minimum that worked really really - still - is the GMA x 3000.
  In other words, you need a graphics card.  But you don't have to spend a lot of money - a PCIe card decent (assuming you have a PCIe x 16 location) can be made for<>

  I have not assumed that you could pop the cover off the PC and see what (if any) you have at disposal a graphic slot, could you?
  Here's what you're looking for:
  PCI Express: http://en.wikipedia.org/wiki/File:PCIExpress.jpg see the long slots?  Those who are 16 x.  No the difference (you can tell by the location of the key in the notch) to what follows.
  AGP slot: http://en.wikipedia.org/wiki/File:AGP_slot.jpg
  In the two photos, the mount is on your left.

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Brother Fax 2820 and other printers are not compatible with El Capitan?

  What happens in the world?

  My printer worked fine until I upgraded to OX10.11.

  Brother Fax site does not provide a driver for OX10.11. the driver for 10.10 will not add to the printer.

  Then is - how they energize the economy, forcing me to throw a good working printer and buy a new one?

  I can be * off the coast at this point, or have I missed something?

  Apple has released a new set of drivers for brother a week ago. Have you tried these?

  Brother 4.0 for OS X printer drivers

• How to change a file that is compatible with Windows Movie Maker? I have .webms, and those who are not compatible.

  Trying to complete a school project, all Web sites have huge watermarks covering 1/4 of the video. Thought Movie Maker moght help, but none of my Webms are compatible with

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are trying to achieve a school project in Windows Movie Maker and I'll be happy to answer your query.

  From now on, I would like to ask to refer to the advice given in the article below and verify the information.

  Can what types of files I use in Movie Maker?

  See also: getting started with Windows Movie Maker

  I hope this information is helpful and good luck for your project.

• Sony VAIO drivers and utilities are not compatible with Windows 8.1.

  OT: Sony laptop Vaio question.

  Hello.

  I was using Genuine Windows 7 Home Premium in my Sony VAIO laptop. Recently, I bought PRO 8.1 Windows and installed.

  Now, most of my drivers and utilities VAIO is not compatible! Support for Sony is saying, direct installation Windows 8.1 will be loss the drivers and utilities and we cannot install drivers and utilities more!

  The solution is that I have to install Windows 8 PRO and install and upgrade the sony vaio drivers and utilities. After that, I can do an upgrade to Windows 8.1 PRO.

  So, the question is, I download the installer of Windows 8 PRO but, PRO 8.1 Windows key does not accept!

  What should do? Now, I am running Windows 7. I need to upgrade to windows 8 and 8.1. Please help me solve this problem. All I need is to make my work with Windows 8 key.

  Reference:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=1379 (see first)

  Thank you.

  Akhil

  Hi Akhil,

  Thank you for writing to us, we are happy to help Microsoft Community.

  What is the model number of the Sony Vaio laptop?

  I wish to inform you that the product key that is used for Windows 8.1 cannot be used for Windows 8.

  If you upgrade Windows 7 to Windows 8, you will need the key to upgrade of Windows 8. The retail version of Windows 8.1 product key cannot be used to activate Windows 8.

  However, the majority of drivers and utilities that are compatible with Windows 8 works correctly with Windows 8.1.

  Please let us know the model number of the laptop, so that we can get the proper drivers and utilities from the laptop.

  Forward to your response.

• Captivate 9 Widgets are not Compatible HTML5 am using a sensitive project and Widgets work Firefox not IE 11

  Hello

  I have 9 Captivate and I use embedded Captivate widgets (not those using assets). I created my project as a project that is sensitive to be able to display in the form of tablets. Captivate told me the widgets are not compatible HTML5. When I publish on my LMS, I can see the widgets and to interact with the course on my laptop via Firefox, but I do not see the widgets in IE 11. Is there a way to get around this, or I must say to my people to download another browser to use my course?

  You need not create a project as a receptive simply to play on tablets or mobile devices.

  If widgets are known to be NOT HTML5 compatible, it is better to not use them at all.  IE11 usually works with the release of HTML5 in Captivate, but your widgets are probably not going to work in this case.

• Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  I installed programs:

  Software individual professor teaches Super Set

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner