Synaptics Touchpad of my laptop HP Pavilion 15 does not

Similar Questions

• SYNAPTICS TOUCHPAD V6.2 ON PS/2 PORT3 DOES NOT WORK

  SYNAPTICS TOUCHPAD V6.2 ON PS/2 PORT3 DOES NOT WORK

  Hi SEXYKAP,

  O what is the number of brand and model of your laptop?

  ¯ What doesn't work exactly?

  Install the required driver should probably solve the problem.

  Download driver Synaptics on the support site of the manufacturer, and then install the downloaded.

  You can find the drivers here: http://www.synaptics.com/support/drivers

  For more help with updating drivers, see: update drivers: recommended links

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop HP Pavilion G6 does not illuminate

  I got this laptop a little over a year.  A few nights ago I used it, and it worked very well.  The next morning, he does not and would not charge. Any suggestions?

  Try a hard reset as follows:
  
  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button

  Please post here your positives or negatives in your thread.

  Best regards

  ERICO

• Pavilion 15: Laptop HP Pavilion connected does not support

  Hi all

  I have a "HP Pavilion 15 Notebook PC' with Windows 8.1 and almost two years.  A few months ago, I had my laptop on my lap and it randomly turned off, once again did not higher than approximately 84%.  Every now and then I would plug in to charge and he said "plugged in, not load ' so I solved the problem by turning off the coast, taking the battery, turning on, uninstallation of Microsoft ACPI-compliant stack method, turning off putting, the battery back on, the BMCC ACPI would day and she charged up about 84%.

  Since about a week ago, which has stopped working. I tried to update the ACPI-BMCC, do the above, several times, and nothing works. I noticed the recommendation for the utility of battery HP but 1) who has not worked in the past, when he would not load completely and 2) the computer has a 0% load and will not hold a charge, so the step where it says turn on unplugged, my computer won't turn on.

  After trying to use the utility of battery HP a few things happened. (1) I have to hit the ESC key to access the menu, by pressing on it when the logo appears as it says has no effect. (2) when I tried to run the battery test, it says 2 minutes from the end and 1% complete before freezing the computer upwards and after pressing the power button it instantly disabled.

  I don't know if I need to get a new battery or if I just try something, I didn't get even.

  Thanks for your help.

  -Kadratos

  Hello @Kadratos,

  That information is a strong indication that the battery needs to be replaced, it is not read correctly.

  Using the product ID you provided that I could find the maintenance and care for your laptop computer guide.

  HP Pavilion 15 Notebook PC Maintenance and Service Guide

  On page 47, the battery part number is listed:

  4 cells, 41 WH, 2.8 Ah, Li-ion - 756743-001 battery

  If you have purchased an extended warranty with Notepad, you can call HP Support:

  Contact HP worldwide

  If not, you can buy a battery of the user part of HP or other trusted shopping sites, using the battery part numbers: 756743-001

  HP part Surfer

  Have a great day!

• Scrolling on the touchpad of your laptop doesn't work does not correctly.

  Original title: navigation arrows: right and left click at the same time

  Hey,.

  Recently, I cleaned the hard drive on my laptop and now find that I've lost some functions. I can no longer scroll to the top and dragging my finger on the far right of my touch laptop pad and I am unable to scroll documents and web pages simply by clicking on the left and right click at the same time. Previously, this brought up and down arrow and I could scroll through pages at varying speeds. Can someone tell me how to recover it?

  Thank you!

  Hello

  1. What is the brand and model of your laptop?
  2. have you installed the latest drivers for your mouse pad?

  You can try to update the drivers for touchpad.

  You must be logged on as administrator to perform these steps.

  un) Open Device Manager by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b) in the list of categories of equipment(mouse), find the device (mouse pads) you want to update, and then double-click the device name.

  c) click on the driver tab, click Update driver, and then follow the instructions.

  See also:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Check if it helps.

• HP Pavilion 14 laptop: HP Pavilion 14 does not completely close

  Hello

  Recently, I follow several updates driver on my laptop as suggested by HP Support Assistant. I believe that most, if not all, these updates have been Intel. Since then, my computer was not stopping completely.

  No matter if I push the power button / stop or klick on farm on the menu, my laptop to initialize the process of closing and I get the blue screen that says "Shutting down...". "but when the screen goes black, my power button light remains on and I can hear the cooling of laptop. Basically, I have to hold the power button for a long time if I want to completely stop my laptop (and to reactivate it later).

  Does anyone have the same problem or know a solution? I suspect, it might have to do with the new drivers, but I don't know how to solve this problem (or even how to know that the drivers have been updated lately..).

  Help would be much appreciated!

  Thank you!

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-NUC

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• my computer hp laptop Pavilion dv6800 does not illuminate

  My hp Pavilion dv6800 does not illuminate

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Pavilion dv9005us does not illuminate

  My Pavilion dv9005us does not light with or without the battery. I held the power to discharge remaining power, then plugged in the ac adapter shows blue light to the decision-making of the laptop, but none of the front lights light up. The motherboard is burned out? Any advice. I just got windows 7 to put on the laptop and unable to start. Bad luck!

  GDH777 wrote:

  Hello and thank you,

  but I had already done all the things that you suggested and your advice was right on point, but the laptop is a 2005 model and in its release cost a fortune, I guess we got our money wrth although I could buy 4 destops for the price of the HP Pavillion dv9005, just want to I could get it to start , with his age, he is not a value of the repair costs.

  But I so appreciated your answer... Viewied much my post but you were the only one to respond, sad for the HP forums. I went else where to get advice and got a lot of instant answers... If the laptop is still under warranty it would not have been a problem. I don't know that this model had a recal on this HP never does the model owners aware of the recall... What a pity so disappointed in HP. I bought a Lenovo y580 a year ago and I doubt that I'll never have problems with support.

  I hate to complain, but still Ty

  Remember, this is a users forum and questions are answered when you can be sure of the answer. I can say, on the one hand, if your system is an AMD-based system in the failures of graphic chipset Nvidia/AMD feared so your Board is most likely won't want to work more. Dv6000 and DV9000 HP have been candidate of choice for these chipset failures unless they have their video chipset fixed or replaced.

• My Hp laptop computers microphone phone does not work. No one can hear me. ??????

  My Hp laptop computers microphone phone does not work. No one can hear me. ??????

  Hello

  Look at this:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/my-micro-phone-is-not-working-no-body-can-listen-to-me-i-heard/m-p/1158987

  Kind regards.

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on my website source

  I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on the source code of my Web site completely offline?

  Thank you. Last time I looked into things with the description "Cloud", it seemed to me that you either need to be logged to the software work (possibly validate the rental date?) and/or your content of current things was 'in the cloud '.

  While I don't like the rental model, if I can make it work offline that may be an option.

  Fortunately, the machine still works, so I have little time to decide. It is likely that my existing sites in Dreamweaver 8 will be compatible up with current versions?