Synchronization of multiple devices with blackBerry Smartphones

Similar Questions

• generate the TTL signal for synchronization from another device with Labview

  Hi all

  I use NEITHER-6071E and try to generate and send a TTL signal so I can synchronize another device with my Labview code. My code (code attached) generates a sine wave, and I want to send a singal TTL out at an angle of phase on the sine wave. Currently, the code sends a sinusoidal signal and a square using similar wave output on BNC Plug. I thought I could just use a square wave, and send it out as analog output for the other device, but apprantly that he works with a TTL signal.

  Could you please take a look at my code and advice me how to generate a TTL signal while being able to send it to some phase shift?

  Thank you davance

  Pooya

  There is almost everything using examples > find examples... menu

  but here is one which simply sends a single impulse:

  

  Note that I expect the line have been pre-defined in MAX (it's always a good idea to check that your DIO line behaves as expected by trying it in MAX).

• Internet browsing from blackBerry with blackberry Smartphones

  Hello

  I have a blackberry bold 9700. I really like this phone. I can set up the phone nokia with my pc to browse the internet. How can I do this with my blackberry phone? Please let me know.

  Check the below article in the knowledge base for connection with PC BlackBerry as modem attached.

  Connect a computer to the Internet via a BlackBerry smartphone as a USB modem attached

• I have a key to firefox sync. How can I synchronize a new device with it?

  I want to synchronize a new device, but all I have is a sync key and I can't find anywhere to enter the key of the synchronization. How can I do this?

  Firefox Sync (Aka recovery key) key has not been used since version Firefox 28. All you need is the email address used when you set up synchronization and the password for your account synchronization - assuming that you updated your account synchronization to a Firefox account after update beyond 28 of Firefox.

  And the former function of 'twinning' has disappeared, too.

• Number of blocking outgoing calls with blackBerry Smartphones

  new user - with BlackBerry 8520... How can I block my number when you call?  THX, ak

  Press your green dial key to enter the call log.

  Press the Menu key > Options > General settings.

  Scroll down to "restrict my identity = Yes.

  And save.

• Disaster of synchronization unwanted Contact with blackBerry Smartphones

  I just got the 7.1 upgrade. Unbeknownst to the BB chose one of my email addresses and sync all my contacts on the net... it's really bad because I do not want my contacts synchronized to one of my email accounts, never. I just want what they on my BB and only my BB. If I delete them on the net, they disappear from my BB. I can't create a new one without being on an e-mail account. Do I need to downgrade to 7.0 to stop this?

  Celt_UK wrote:
  Can I just get the contacts only on the BB and he never asks me what email address must be associated with a new contact?

  Yes, do what I said above, disable the synchronization of contact.

  Article ID: KB22430 How to enable syncing wireless contact with the BlackBerry Internet Service

  Celt_UK wrote:
  I think (and don't ask me how) I could remove my contacts to hotmail but leave them on the BB... now isthere any way to get rid of the liaison between the BB contacts and my email?

  If you have more than one e-mail account on the BlackBerry, the address book to associate with one or the other. But if you turn off synchronization according to the guidelines, it will not.

  This isn't an OS7.1 upgrade function, it is here since OS5 and depends on the integration of BIS of your accounts.

• BlackBerry smartphones into new device with Blackberry ID, what happens if I send Messages using my old camera (, who were not fired yet) BBM with WiFi only?

  Hello. Greetings. I have a question that is quite tricky and can not understand of I'vedone research on the internet with different keywords. So here's my situation:

  0. my old phone is Blackberry Bold 9780. Last OS I use is Blackberry 7.0 I think (already have Wi - Fi free call)

  1. I bought a new phone, Sony Xperia Z1. I opened the BBM on it. Then I entered Blackberry ID , I've used previously.

  2. after entering my Blackberry ID, I got transferred all BBM stuff in my Xperia Z1, including the contacts and groups that I have in my Bold 9780.

  3. I just tested for send messages in my Xperia Z1 BBM contact list and ask which showed my PIN. He said that only displayed a new (7xxxxxx), instead of my old one (2xxxxxx).

  4. Meanwhile, since I bought Xperia Z1, I have kept my old phone Bold 9780 without wiping or same nothing change and just leave it as its last condition without SIM card (it says "Insert SIM card"). Since I never used data connections , I still have my old BBM chats and contacts in there.

  5. my 5 year old son accidentally use my Bold 9780 of BBM and sent a lot of messages in people in contacts of the Bold 9780 BBM, although he did not use the SIM card. And Yes, the messages he sent chat appears with the icon of the clock (pending to be delivered). But I really hope that the messages will not be sent because the words are not necessary to read.

  Question (s):

  * What happens if I turn on my Wi - Fi connection for my Bold 9780?

  * Will be messages sent from my Bold 9780?

  * Should I just immediately remove contacts on BBM to my Bold 9780? (because I know all the messages I've sent to people will be deleted as well if I delete their contact, and it works)

  * ... And last confusion is, if I have to delete my Bold 9780 BBM contacts, should I remove my Z1 xperia as well since I use the same Blackberry ID to avoid messages sent in other?

   

  Really need the help. Thanks for your time.

  Best regards
  

  brown11
  

  :-)

  Hi Brown

  Welcome to the community

  -nothing will happen if you turn on wifi. You can able to browse the internet, but you will not be able to use BlackBerry data services.
  -No, the messages will not be delivered as there is no sim card and your BBM contacts were automatically transferred to the mobile network to your new phone.
  -no need. It not there no more account BBM in your old. You're good, no worries.

  We hope this helps. Good luck.

• Synchronization of sent emails Hotmail withs blackBerry Smartphones

  My Bby sent emails are not syncing with Hotmail even though they used to when I had a Pearl.

  I pay £10 a year to Hotmail, so there is no reason why it does not work.

  Any ideas?

  I log into your BIS account and remove your hotmail integration and then return to fresh.

  they only reconcile BB to the mailbox, no mailbox for BB

• Calendar of device of blackBerry Smartphones gets double entries when syncing with Outlook on PC

  For the first months, everything was fine, but after the sync now I find double appointment on my device.  It said "sent by using Desktop" and the other says 'Received using [email protected]'. "  How to configure things so that this continues to happen?

  See if this will help you clarify the question.

  Make sure that your look is first completely up to date.

  http://www.BlackBerryFAQ.com/index.php/How_to_Clear/Delete_all_your_Address/Calendar_items_at_once

• Synchronization of multiple unit with the PXI-1044-6250 M-6143S

  Hi all

  I have a problem with several device synchronize with my PXI system: when starting a measurement, the devices do not start at the same time despite using a trigger to start. The delay in the start time varies randomly between 150 nanoseconds and about 80 milliseconds.

  My PXI system consists of the following:

  • Controller PXI-8108
  • Chassis PXI-1044
  • 6 * Series S PXI-6143 (Slots 2-7)
  • 1 * Series PXI - 6250 M (8 slots)

  The software in use is LabVIEW 8.2.1, NOR-DAQmx 8.9 and MAX 4.5.  "The trigger line routing" is set to "Dynamic" for all 8 lines.

  I created 3 tasks in the attached VI: task 1 ('Drehimpulsgeber' = encoder, 1 channel, rate: 1.25MS / s), task 2 ("Heißfilme 1-8" = hot-film probe No. 1-8, 8-channel, 250 ksps through rate / s) and task 3 ("Heißfilme 9-16" = hot-film probe No. 9-16, 8 channels, rates by way of 250 ksps / s). 3 tasks are expected to start at the same time acquire the analog voltage by pressing the button "Start". "." As the trigger for the beginning, I use a digital pulse created on/PXI1/PXI_Trig0.

  After reading samples, the first timestamp recorded for each task is retrieved, displayed and the delay time is calculated (see boxes 'Start time' and 'Time Delay' on the front panel).

  How can I optimize to synchronize the start of all three devices without getting this random delay?

  Thank you in advance.

  Kind regards

  Matze

  Hi MatzeK,

  Here's another one. Could you please try this too and send me information on success?

  TomBaum

• Locked device of blackBerry Smartphones

  I've got a blackberrry "BOLD" that has not been used for some time. I have trid to run it from my regular blackberry lost the camera.

  I put a sim started upward. Pins for the card Sim has been accepted, but then he said: "the device is locked. He can't get through

  ?

  Hello!

  Your phone is locked to a specific service provider? If this is the case, call to ask for the unlock code.

  Another is that your device IMEI is blocked. Check with your operator.

• Problem with blackBerry Smartphones

  My model number of blackberry's curve 9220, I am faced with a serious problem but who is bit Wired, yesterday, I found my mobile screen doesn't work, its getting when it comes under the light, otherwise the screen is totally black. The phn is absolutely fine in the light of day or under a light, but again urban power off when you its in black. I don't know what that is the problem, that is, please can you me what exsactly happened? Its urgent... Please come back to me as soon as possible.

  abirbb wrote:

  Thanks, for the reply. But I tried all possible ways, but I failed, I think it's a problem with the sensor. I loaded my mobile during the night, but its still does not not in the dark. In fact, my phone was in my Pocket yesterday and it was raining, but it was not during treatment, but when I pulled out the Pocket it was totally urban off. I thought I should keep under a fan or a light after 1 hour it turned on and I made calls and it was working fine. But it was because of the light that I discovered much later. Do you think this a serious injury?

  Please wait... Remove the battery immediately!

  YES... It can cause some SERIOUS DAMAGE!

  If our BlackBerry never am wet then we shouldn't try to turn to see if it works. Must immediately remove the battery and also SIM media card. We should put in a bag of uncooked rice that absorb moisture. Should allow for at least 3 to 4 days unless we are sure that the moisture has been absorbed completely. Then we need to put our BlackBerry over entire surface of heat as a stabilizer, CRT monitor or output in the dashboard of a car on a sunny day. Before inserting the battery, we should be sure that it is completely dry.

  Always it after following these steps, it is not ensured that our device will be no problem and happen as above, because when moisture or any substance liquid go our BlackBerry, he started corrosion which leads to the problem like quick battery drainage, by typing problem and many more.

  Then, remove the battery and try these steps.

• Device of blackBerry Smartphones, password fails at the end of the installation OSv5 on 9000 "BOLD" - help!

  I installed the OS on my 9000 "BOLD", to the latest version.

  The process is almost entirely complete - unit recharged, and the progress bar to "Restore device data" seems to be almost complete.

  But then I get a message "your BlackBerry is currently locked. To continue, you can unlock your device. »

  So I enter my password on my blackberry and it does not - he thinks that I typed the wrong password.

  I try 5 times with the same results.  Yes, I type the password correct even I had to use when I started the Fund Manager and the installation process.

  The installation somehow caused my device to zero or change his password - how do I continue?

  I'm afraid to unplug the unit, given that the upgrade process has not completed.

  I'm afraid to enter the wrong password, since it will wipe my data from the device, and I don't know if I can access after installation to restore the only recent backup I have is one created automatically by the installation program.

  Can anyone help?  What should I do?

  My blackberry is associated with a corporate server, which can restore a part of my data - but in its current state, it is not activated with the server.

  Don't be afraid to unplug your phone during an update.  This seems quite heavy but you can still recover your phone of the backup that was made before the start of the update automatically.  You might even find wise wipe the phone and restore this update.  My only concern is that he could not get rid of the password problem. It can install the password feature again and you would be away before.

  I hope someone knowing the password function will have to intervene here to help.

• Problem blackBerry with blackberry Smartphones protect = < the package...

  Hi, guys, with that I have problem protection

  I got an error massege (the service plan for your blackberry device dose not supported this (app)...

  Please what can I do?

  Hi Aziz-s4

  Welcome to the Forums of the BlackBerry Support

  That you did not mention then ask you BlackBerry data Plan on your account?

• Connected devices said blackBerry Smartphones but desktop manager is not

  I think I messed up something. I have a circle with a slash through it and the circle, triangle and square bar on the screen.

  Device Manager indicates that it is connected, but the desktop program can not find the device to reinstall the software.

  Help!

  Hi orracle and welcome on the Blackberry Forums

  Visit this link please

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15877&sliceId=2&docTy...