SyncToy error

Similar Questions

• SyncToy 2.1 'unknown error. Access is denied. »

  I just bought a new laptop I want to synchronize with my desktop.

  SyncToy 2.1 is only installed on the desktop.

  Both are equipped with Windows 7 and are the only members of a homegroup.

  The files are accessible in both directions through the homegroup.

  Folder on the left C:\Users\Me\Documents\

  Good record \\TINY\Users\Me\Documents\

  Both machines have all the boxes SHARE the LIBRARIES of PRINTERS AND audited.

  Under CHANGE ADVANCED SHARING SETTINGS both are configured as follows:

  Turn on network discovery

  Open file and printer sharing

  Turn on sharing so anyone with network access can read and write files in public folders

  Use 128-bit encryption to protect file sharing connections

  Turn off password protected sharing

  Allow Windows to manage the homegroup connections

    

  HOWEVER

  When I right click on a folder to share (IE. My Documents) and follow the SHARE WITH menu drop down, no one is to his left, a lock icon

  If I try to change the READ/WRITE permissions to the homegroup it allows me to select, but when I revisit, he returned to PERSON with the padlock icon to its left

  When I run SyncToy 2.1 and ALL RUN the meter end account but each unique number is the column down in red.

  The SyncToy execution completed with errors.

  Read errors: error Error: Unknown. Access is denied. (Exception of HRRESULT: 0x80070005 (E_ACCESSDENIED)) Copy the path C:\Users\me\file

  I have this feeling I'm missing something very basic, but I don't know what it is. Your help will be very appreciated.

  I have experienced the same problem earlier with SyncToy 2.1 running on my Win 7 x 64 Dell e4310 backup bare SATA hard drives via a Kingwin dock via eSATA.

  More funny thing is: SyncToy to backup all the files on my disk WD Caviar 320 GB ("Backup1") without any error. But when I pop my WD Caviar Green 1 TB drive it in ("Backup 2") grates fair 520 failure operations. All with "Exception from HRRESULT: 0x80070005 (E_ACCESSDENIED).

  How I fixed it:

  Shift-right click on SyncToy 2.1(x64) and select 'run as administrator '.

  It worked for me.

• Error message SyncToy to create new folder pair

  After working for years, SyncToy now gives me the message: «cannot find the Microsoft Sync Framework components required for SyncToy.» Run SyncToy 2.1 Setup from the original location. »

  I uninstalled, re-downloaded, installed again without success. I run Windows XP and keep updated all the updates from Microsoft. About a year ago, I had a hard time installing Microsoft Expression web problems to .NET installed, but that has been resolved. Don't know if it could be related.

  Hello

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

• SyncToy 2.1 - synchronized records are not the same

  I use SyncToy 2.1 on a 32 - bit XP system.  I did a "sync" between a local folder and a folder on a mapped drive.  SyncToy reports no errors, but the 'properties' for each of the files are not identical.  One of the folders has 358 files (local folder), and the other has 359 files (the folder on the mapped drive).  There are also differences in the "size" and "Size on disk" in the Properties window

  Good living, XP

  Please go through the below thread that has the explanation of the creation of .dat files when using SyncToy synchronization that could be one of the reasons why you find more number of files.

  How to avoid creating files hidden as SyncToy_*.dat in synchronized folders?
  http://social.Microsoft.com/forums/en-us/SyncToy/thread/8d3256d9-173f-404A-a68f-aca78382be15

  For additional help with SyncToy, please see:

  SyncToy 2.0 - frequently asked Questions
  http://social.Microsoft.com/forums/en-us/SyncToy/thread/5c021aa1-8738-47af-854D-c38d635800ac

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Planning of SyncToy v2.0

  Hello

  I am planning (automatically run) SyncToy 2.0 to synchronize multiple files from 6 different users with the admin account I already managed to install SyncToy and rotate by hand on the admin account, but now I want to run it automatically on this one here: before you connect with any account before signing out and before stopping.

  I have a Windows-XP Home SP3 and a Windows Vista SP2, with an external hard drive to copy the files to.

  So like this:

  Desktop computer (XP)-

  External hard drive (Z: /)-all connected to my router.

  Laptop (Vista)-

  How can I do this? Because I can not find the option to schedule the task before putting the computer power off or before a disconnect in the Task Scheduler.

  Does anyone know how to use the Task Scheduler with SyncToy v2.0 or do I need to create a batch file (or deal multiples), to run SyncToy v2.0 automatically when:

  -closing
  -signing the
  -signing off
  Two computers work with SyncToy v2.0, and I want to run SyncToy v2.0 on them automatically.

  -------------------------------------------------------------------------------------------------------------------------

  This is what offers the SyncToy help file:

  Run a command line SyncToy SyncToy can be run from the command line to provide support for planning or automating folder pair execution. The default command line executable is located in the: 2.0\SyncToyCmd.exe \Program Files\SyncToy [unite_systeme].

  The parameters provided by this command line interface are described below:

  • R - run all pairs of records that are marked as active for run all.
  • R [name] run the pair of folder named (folder that one pair can be specified).

  Usage examples:

  • SyncToyCmd r MyFolderPair
  • SyncToyCmd r

  It is also possible to manage pairs of file from the command line. Folder pairs are managed by SyncToy.exe while planning is done via SyncToyCmd.exe as described above.

  SyncToy does not support multiple copies of SyncToy.exe at the same time. If SyncToy is already running the task bar, and a second instance of SyncToy.exe is launched with or without any command line parameters, it will simply bring the already running instance in the home and no error will be reported.

  SyncToy.exe-associated parameters are described below:

  • d (= left, right =, name =, operation = synchronize |) ECHO | Contribute, [check = yes | no], excluded =, included =) creates a new pair of file with the specified options:
    • left - mandatory, provide an absolute path to left file
    • to the mandatory time - provide an absolute path to the right folder
    • name - required, provide the name of folder pair
    • operation - required, specify the action type for this pair of folder
    • check - optional, specify if the content of the file should be checked for correspondence file, the default is none
    • excluded - optional, specifies the filter of exclusion for files, by default, no
    • included - optional, specifies include filter for files, default settings to all the
  • u - remove one or more folder pairs, no user data will be deleted
  • -? Display help

  Usage example:

  • SyncToy d (left = e:------, right = c:\Photos, name = MyPictures, operation = contribute)
  • SyncToy - uMyPictures

  Hello B0ries,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will support what ask you
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Scheduler task does SyncToy as expected but Will Run On Demand

  Vista Home Premium (32 bit), SnycToy 2.1

  I tried to implement a daily local sync automated using the Task Scheduler and SyncToy.  I put in place a task in Task Scheduler task instructions of SyncToy.  I am using the command line option (..) (SyncToyCmd.exe option' - R) for all pairs of batch record.  I can run the synchronization to the application successfully, but the scheduled synchronization does not work.

  • The task is enabled.
  • I delivering the option 'run with highest privileges '.
  • There is no set of conditions
  • I am the only user on this computer and I am the administrator.  The computer has a password.

  As time passes, the "next time" recovering the next day, but the Sync does not work and there is no error generated.  It appears as if he had run, but cmd window doesn't pop up (as it does when running on-demand) and files are not synchronized.  Nothing happens.

  A test, I chose to program using the... SyncToy.exe file (without the - R) argument and the Scheduler will be launching the program successfully, but of course, is not sync.

  Any ideas why Task Scheduler is not running the... SyncToyCmd.exe as expected?  Any help would be appreciated.

  Thank you!

  Hello

  Please check with the Experts in the Forums of SyncToy

  SyncToy - Forums
  http://social.Microsoft.com/forums/en-us/SyncToy/threads/

  Happy holidays.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SyncToy - access denied (Exception from HRESULT: 0x80070005).

  After I run SyncToy (Windows 7) I got 2 errors.

  creating folder - access denied (Exception from HRESULT: 0x80070005) 

  folder creation - cannot write to the destination file. Exception from HRESULT: 0x80070005 (EACCESSDENIED)

  How can I solve this problem?

  Hi Paul,.

  You have posted the question in the forums above?

  Alternatively, you can refer to this article for more information.

  Unknown error. Access is denied (HRESULT 0x80070005)

  http://social.Microsoft.com/forums/en-us/b720807e-29AB-4def-ba41-0fc78302406c/unkown-error-access-is-denied-HRESULT-0x80070005

  Hope this information helps.

• SyncToy 2.1: Problem opening a PPTX when copied

  I use SyncToy 2.1 (32-bit) to copy files in bulk (daily) from my USB on my NAS. I noticed that only the PPTX files have difficulty to open the destination folder, but are very good on the source folder. Other files such as PDF opened very well once copied.

  Here is the error:

  PowerPoint has detected a problem with the content in >. PowerPoint can attempt to repair the presentation.

  Once I click 'Fix' it goes on to say:

  Sorry, Powerpoint cannot read >.

  Everyone has seen this problem with SyncToy?

  Hello

  SyncToy has its own support forum (see below):

  How to synchronize two folders using SyncToy
  http://www.online-tech-tips.com/free-software-downloads/sync-two-folders-Windows/

  Downloads: Download details - SyncToy 2.1
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15155

  SyncToy - Forum
  http://social.Microsoft.com/forums/en-us/SyncToy/threads/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• SyncToy 2.1 suddenly don't synchronize my EFS encrypted files

  I have just upgraded to Windows 7 Ultimate (64 bit) on my laptop and desktop. Until recently, I used Synctoy 2.0 on my laptop to synchronize the files with my office. On my laptop, the files are encrypted using EFS in Windows; While my desktop files are unencrypted. SyncToy has done a great job.

  Last week, I installed synctoy 2.1. Since then, synchronize with my encrypted files does not work I get the error message "unknown error... the specified file could not be encrypted." I have to decrypt my files so that I can sync, and it takes a VERY long time.

  Can anyone help please?

  Hi mbowles198 ,

  Thanks for posting on Microsoft Answers!

  If upgrading from a previous version of SyncToy (e.g. SyncToy 1.4 or SyncToy 2.0), it is * CRITICAL * to make sure that all folder pairs are completely synchronized using the previous version before running SyncToy 2.1 Setup.
  Do not follow this guideline may result in unexpected behavior and a partial loss of data when you run SyncToy 2.1 for the first time after the upgrade. All folder pairs must also be fully synchronized at least once just once the update is done.

  You can install 2.0 Sycntoy synchronize the folders again after that, you can switch to Synctoy 2.1.

  The article below explains more on this subject:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c26efa36-98E0-4ee9-a7c5-98d0592d8c52&displaylang=en

  You can also check out the forum below for Synctoy:
  http://social.msdn.Microsoft.com/forums/en-SG/SyncToy/threads?filter=answered

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SyncToy 2.1 fails

  My 2.1 Synctoy has stopped working, the error message "cannot create the folder pair. Unable to create the provider"I tried to delete and restore did not work, same message. Tried to download synctoy again, not would download - anyone with an answer how to fix? Worked well for a while, seems to have failed after the last bunch of updates that came through.

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• Used to synchronize SyncToy

  When I try to sync my folders and files, I get an error dialogue which States "Exception during the preview. Unable to create the provider. I've made several attempts to uninstall and reinstall the software, even scans the registry to remove all references to SyncToy before reinstalling. Help. This happens on one of my machines, one that comes and goes to work with me. Problem, I can not sync my files work with my laptop at home or office.

  Hi Dr. Lambert.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en-SG/SyncToy/threads?filter=answered

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• SyncToy works only with windows *.

  I tried install synctoy with .net framework 4 is installed on windows 8 and still get errors saying needs .net framework version 2?

  can someone help please.

  You can try to open the program and features in the control panel. There, select Enable Windows features to enable or disable and check .net 3.5. This should include .net 2.0.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.