sys password security

Similar Questions

• Sound is gone on my Macbook Pro. The icon is grey after trying to download a password security app Help!

  Sound is gone on my Macbook Pro. The sound icon went gray. This followed two downloads of password security applications and then deleted. The third I have kept and entered my password. If I go into the Time Machine to restore the system will delete the security of password I put in place after the last Time Machine backup?

  Thank you for your willingness to get out me of trouble!

  Hi Vincent,.

  I understand that you are no longer able to control the audio output on your Mac after installing a few different security applications. If you want to use Time Machine to back up or restore your Mac at one point before installing these applications, it is absolutely an option. However, keep in mind that this kind would remove, indeed, any changes made after the point of this backup, including installation and configuration of said software.

  Alternatively, you can consider having a look at the article in the link below for steps that can help to restore the functionality of audio output on your MacBook Pro.
  Troubleshooting for any audio speakers on Macs

  https://support.Apple.com/en-us/HT203186

  Sincerely.

• At the end of the creation of an e-mail account, that the program will ask a software password security device, I don't know what it is or where to find it.

  At the end of the creation of an e-mail account, that the program will ask a software password security device, I don't know what it is or where to find it. To my knowledge I don't have a 'software security device. I use Windows 7 on an IMac.

  Apparently, you have defined a master password at one point. The password protects passwords that Thunderbird remembered.
  You can reset the password. More information in this article.

  http://KB.mozillazine.org/Master_password

• When I open FireFox "password security" opens the window TWICE both must be entered to open FireFox, why?

  When I load FireFox Master Password Security window opens 2 times. Both are mandatory for FireFox to access password. Why and how can I fix it?

  You use Firefox Sync or reopen the pages that you have registered a password?

  • https://support.Mozilla.org/KB/what-Firefox-sync

  Try one of these:

  • StartupMaster: https://addons.mozilla.org/firefox/addon/startupmaster/
  • Master password +: https://addons.mozilla.org/firefox/addon/master-password/

• Icant remember my user name and password how to past the windows password security and account name

  I forgot my user name and pass word to enter my computor, it won't let me go any further then windows username and pass. can not enter in the rest of the computor

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?

• Password security

  I am trying to get a signature of a client through echosign.

  His request is as follows:

  After that I connect it I save it in PDF format. When it registers and I will review the document, nothing has been recorded.  My signature and initials disappeared.

  Even if she mentions her sign, still is not coming to me and always appear in our account as signed, but on the contrary "to the signature.

  Since I could not help him with this problem, she looked in the "document properties" of the document at its end and found that under the tab 'security', "password security" is the area of expertise under the option 'security '.

  In addition, under the list of the 'document restrictions summary' (under 'document properties') 'Signature' of the document "not appropriate."

  When you access the agreement through my account echosign (management), I click 'protect' to find settings and it said that this Agreement uses "verification e-mail". When I go to change that in the 'identity check' field, I give myself only this option or "email more (password)." This could be the problem and if so, how can I change the setting?

  It is the only document out to the signing, that I had this problem with (going on for several months now). Other agreements were signed, no problem.

  How I change these security settings?

  The client was extremely excited at this point and this was not a good experience for them. I fear that we are losing confidence and hope someone can help!

  Thank you!

  Molly

  Hi mollyf66803900,

  The user has no need to download the document send through Adobe sign of maintenance to the sign.

  Please share the steps with the signer to sign the document below:

  - Sign an agreement. Adobe sign

  Once the document is signed, Send & signer will receive the copy of the document signed in an attachment to the email.

  It is not possible to make changes in the document because it is a protected document.

  Kind regards

  Nicos

• start of 12 DB in the configuration of multithreading without knowing the sys password

  
  Hello

  I have a test of 12cR1 (12.1.0.2) oracle database in an AIX environment. I wanted to try the Unix 'multi-threading' on the machine architecture, so I did everything excpet creating the password file before you shut down the database where the init.ora file has been modified (by adding threaded_execution = TURE).

  NOW I'm stuck, because once you enable multi-threading OS authentication not working anymore.

  You must provide the password for SYS explicitly, the problem I know not the SYS password and now cannot start the database!

  any suggestion or help?

  The problem is solved by following the guide in the following link: http://www.dbi-services.com/index.php/blog/entry/multithreaded-12c-and-connect-as-sysdba

  Kind regards

• Confused about my SYS password

  We have a 11.2.0.2 Oracle database we use for PeopleSoft. We had an audit, and they seem to think that we use the default password for SYS. I guarantee you that we are not. I think they can have determined this by obtaining a list of hashes of password.

  In my attempts to prove that they are wrong and we do not have a default password then I did some research and ran the following query:

  SQL > select *.

  2 of dba_users_with_defpwd;

  USERNAME

  ------------------------------

  APPQOSSYS

  PS

  SYS

  DIP

  ORACLE_OCM

  PEOPLE

  OUTLN

  7 selected lines.

  I don't understand why it's show SYS here. It definitely fails if I try to connect with CHANGE_ON_INSTALL or change_on_install

  In addition, the SYS password is identical to SYSTEM, I think, so which would have shown here if that is the case.

  I will say that the database was created by the PeopleSoft database creation wizard, then perhaps what it do not update dba_users_with_defpwd or some other table properly?

  So, how can I prove the password for SYS is not by default?

  Roger, 11g Express and an 11.2.0.3 looking at the user SYS system appears in select out of dba_users_with_defpwd, even if the installation required for SYS and SYSTEM passwords so all I can say is that you demo system via the command line using something like sqlplus system/deft_password and capture the message ORA-01017.  You should be able to do the same for the user SYS providing you make the attempt to connect sqlplus from a remote server.

  - -

  HTH - Mark D Powell.

• Why the bottom of the PDF "password-security settings" window get cut?

  The bottom of the PDF "password-security settings" window is cut on my 13 "laptop screen Samsung.

  The window is not adjustable and it exceeds the size of the screen of my laptop.

  I used the tutorial as a guide to guess where my cursor was on the 'OK' button so I would know when to press Enter and engage the password.

  I use a trial version of Acrobat Pro DC.  This glitch will continue on the full version?

  My operating system is Windows 7.  Everything else in Acrobat works very well so far.

  Thank you, Kate

  There were messages to this topic on this forum in the past, but they were, I think for Mac, no windows, and I think that the problem has been fixed in the latest versions of Acrobat/Reader XI. It seems that he jumped to the top of back. What is the size of the screen of your laptop and the screen resolution. If you change the resolution of a superior the problem goes away (I understand that may not be comfortable for you, but just as a test)?

• SYS password does not not in Dbcontrol?

  DB: 11 R2

  The SYS password does not work in the DBcontrol.

  I've recreated the repository.

  I've reconfigured the Db control.

  the password works by connecting to DB by sqlplus.

  Any ideas what I need to do?

  Concerning

  ROEs

  Re-create the PWD file

  References: Metalink Note: 358201.1

• Error 404-not found? Although services are upward and the gaze of password security very well.

  Installed Enterprise Edition on the server, error 404-not found? Although services are upward and the gaze of password security very well.

  Thanks in advance,

  What URL are you trying to access?

  for em-->http://localhost:7001 / em

  to get answers-->http://localhost:9704 / Analytics

  Unless you change them.

• Header and footer can still be edited with password security enabled. Why?

  One of our legal secretaries just noticed that, even after the fixing of a document with a password (do not open, but to change), the header/footer options are always available. We have Acrobat pro X, just as an info. I never noticed this before and had no response to its concerns. Of course, if the customer or another beneficiary does not a 'Pro' version (or some similar third-party product), the probability that this material is minimal. But we are curious as to why these features are left open.

  Once again, numbering Bates, watermarks, headers, footers, etc. All of these items in tools | Pages | Change the Design of the Page section Pro X are always big open. Password security has been applied (even to a copy) to edit. Compatibility version was created for version 7. Document has been saved and reopened, to confirm the demand for security.

  Thoughts, anyone?

  Thank you!

  Aaron

  I just tested with Acrobat 11, and although it allowed me to select Tools > Pages > header & foot > update and enter new values, it did not change and gave the following error message when I tried: "you don't have sufficient permissions to perform this task.

  See something different and are all changes made to an authorized secure document, and if so, and you are allowed to save the modified document?

• Sys password invalid 11g

  During the installation, I have selected the option "Same password for all SYS" & typed in.... twice.
  
  So now I'm Runnin' SQL-Plus I'm trying to sign as a Sys... its says that I have to signin as SysDBA or SysOper. Well, Ok.
  But using the names (Ucase, Lcase, mixed) my password / login is not valid.
  
  I swear I typed the password correctly,
  In fact, when I connect to the database of the system controls (does not seem to mind that mention rolleyes)
  the password works & let me in.
  Unfortunately from there I can't do anything other than make a new administrator.
  
  My administrator user "Bob" allows me to connect to SQL, but I can't create tables, modify, or grant privileges... so...
  
  How can I get connected as SYS (DBA)? And to grant privileges to the 'Bob '?
  
  
  Is there a GUI for Oracle?

  >
  I get the 12560: TNS Protocol error on all connection attempts when I run the command prompt in the Accessories menu.
  I don't know how to copy in the command prompt window runs a PrintScreen together... believe me, he says "12560 TNS Protocol Error.
  >

  Do you get the error only when you try to use the command line?

  >
  This instance of the command prompt is 'already in' sqlplus because the first command I get prompt is ' enter username: ' (no place to type the 'SQLPLUS user/pwd as sysdba'...)
  >

  What happens when you drill in sys/password as sysdba on the user name: guest?

  Enter Username: sys/password as sysdba
  

  I'm always flumuxed as to why I can enter into the control of the database, but I can't not sysdba/pwd in the SQLPLUS... questionable now, just... weird.
  >
  We're probably just not doing things.

  >
  The main difference is the following:
  Accessories-> guest is DIFFERENT than the command prompt I get from the OraHome-> application development-> SqlPlus shortened.
  >

  Please check the properties of the two and confirm that they are pointing to the same destination.

  Kind regards
  Phiri

• orapwd file out of sync now because I changed the sys password!

  I just got these two databases and online work (primary and backup) and want really not necessary to ask an outtage the customer...
  
  HP - UX 11.23
  Oracle 10.2.0.2
  
  For some reason, I couldn't get my Toad session connect with the credentials of sys, so I thought that I have blocked the account.
  I used a sqlplus session to change the sys password...
  As soon as I hit enter on the command commit, I knew that I messed up. I remember reading that the sys password must be identical.
  I found my notes on what I had the sys attributed to the last day before, and which would correspond to what it was supposed to be on the primary.
  I changed it back, but still the day before has lost the connection of pulse and throws failures in the primary alert log.
  
  Is anyway this sync everything up without having to take down the two databases and recreate the password file?
  
  My research have all returned nothing but how to create the file, it's self.
  
  Thank you.

  If you change the sys password then the pwd file should be updated with the new password. If you are concerned about the replacement of the file password standby with primary... Make a backup copy of the file on hold and then put spikes in place. It should work without problems.