System audio warning when you try to enter a Webinar

Similar Questions

• When you try to enter in my email I get and error saying "cannot start microsoft office outlook. Could not open window outlook..."

  When you try to enter in my email I get and error saying "cannot start microsoft office outlook. Could not open window outlook..."

  Outlook:

   

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Discussions of general issues of Outlook.

  They will help you with your Outlook questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• "Missing operating system" is displayed when you try to start Windows 10

  I have been using bootcamp to access the 10 Windows for quite awhile. It was working perfectly until a member of the family installed a Windows Update, but the battery is dead during the update. Following this window would charge any. A black screen with a blinking cursor. After that, I went back on fairing and wrong used the partition synchronization tool. Now, Windows is in a worse state and the "Missing operating system" message when you try to get back in. In addition, the Mac startup disk no longer allows me to reboot the laptop using the bootcamp partition, as if the partition is not more detected. Disk utility simply shows a greyed out "Disk0s4."

  I spent a lot of time looking for a solution, but without success. Here are some of the things I've tried so far:

  I don't know if its of any importance but sudo fdisk e/dev/disk0 the following message is displayed:

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-174722176] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [175131816-1269536]

  * 4: 0 b 1023 254 63-1023 254 63 [244256768-244140032] Win95 FAT-32

  The partition Inspector displays this:

  Report for internal hard drive *.

  Current GPT partition table:

  # Start end LBA LBA Type

  1 40 409639 system EFI (FAT)

  2 409640 175131815 mac OS X HFS +.

  3 175131816 176401351 Mac OS X startup

  4 244256768 488396799 database

  Current MBR partition table:

  # A Type starting ending LBA LBA

  1 1 409639 ee EFI protection

  2 409640 175131815 af Mac OS X HFS +.

  3 175131816 176401351 ab Mac OS X startup

  4 * 244256768 488396799 0 b FAT32 (CHS)

  MBR content:

  Bootcode: unknown, but bootable

  LBA 40 partition:

  Startup code: no (Non-system disk message)

  File system: FAT32

  Filed under GPT partition 1, type system EFI (FAT)

  LBA 409640 partition:

  Startup code: no

  File system: HFS extended (HFS +)

  Filed under GPT partition 2, type Mac OS X HFS +.

  Classified in the MBR partition 2, type af Mac OS X HFS +.

  LBA 175131816 partition:

  Startup code: no

  File system: HFS extended (HFS +)

  Filed under GPT partition 3, type Mac OS X startup

  Classified in the MBR partition 3, type ab Mac OS X startup

  LBA 244256768 partition:

  Startup code: no

  File system: unknown

  Filed under GPT partition 4, type database

  Classified in the MBR partition 4, type 0 b FAT32 (CHS), active

  I also tried to use Windows, but without success startup repair.

  If there is no solution to this problem, all least, hope to be able to back up everything that was on the Windows partition.

  Thank you very much

  What is the year/model of your Mac? Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  This will show the first block of the Disk0s4.

• I just got the error message when you try to enter my I and Psalm I have paid for the monthly subscription for 3 months and still have not been able to use these software. they are already installed it just let me acess them?

  I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?

  Log, activation, or connection errors. CS5.5 and later versions

  Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.

  Mylenium

• Operating system stops responding when you try to delete items

  Original title: when I click with the right button on an item to remove, or remove just push the box comes up and it takes forever to delete a single element.

  When I'm trying to remove something, say my office or my favorites. When I right click on the item and press on delete the box just asking me if I want to remove the item, I press Yes and then it shows that it is deleting, but it takes forever just to remove a single item. then I try to cancel because it takes too long and it does not close. I have to start managing the tasks then. What can be the problem?

  Hello
  
  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
  
  Step 1: If the problem started recently, then try to restore the system on your computer and check.
  Reference: http://windows.microsoft.com/en-US/windows7/products/features/system-restore
  Step 2: Try creating a new user account and check if the problem persists there.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  Step 3: Also to run a scan for virus/malware online on the computer.
  http://OneCare.live.com/site/en-us/default.htm
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356
  
  Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
   
  Measures to check the application event log:
  
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
  
  Step 5: You can also check if the problem persists in safe mode and after the same return.
  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode 
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Preferance pane window keeps popping open when the data entry or search in all fields. I'm also using 1Password and happens when you try to enter a password

  I'm running on Mac OS X 10.7.4, Firefox 14.0.1. This problem did not exist until this last update of Firefox. Basically, a preferences panel opens each time data is entered in a field. It doesn't seem to be the same preferences panel you see when you open preferences through normal access Firefox, IE. Firefox > Preferences. All the choices listed in this special preference pane are specific to Firefox. I have a screenshot that I could include if wanted. When you use the pane appears when you enter a search in the search bar near the address bar of 1Password the task pane opens, when entering data in any field because I am now filling in this report in detail pane also appears. It's pretty boring. Any advice? I will try systematically to leave any add-ons and see if that makes a difference. I have ave tried to do a reinstall without result.

  Isn't it always the case if you disable the other extension except 1Password?

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on the Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Strange the Task Manager warning when you try to complete the csrss.exe process.

  I have recently had a few horses Trojan one my system. In my paranoia I'm looking for anything that could be a virus remaining. I was looking through my list of remaining process and ensuring that everything was legitimate. I was watching csrss.exe to check to see if it was in the right place on my computer. When I right click on the process, I accidentally hit end process. The warning displayed was different from warning of other processes that I tried to stop, he said "you want to interrupt the system process"csrss.exe "? To end this process stops the operating system immediately. You will lose unsaved data. Are you sure you want to continue? "Then below, there was a box that says 'give up unsaved data and close '. When this check box is selected, a button that says closed which was gray now became available to click.  I just found it strange and I've never seen this warning before ending other processes.

  IF YOU DON'T WANT TO READ ABOVE:
  The warning was "you want to interrupt the system process"csrss.exe "? To end this process stops the operating system immediately. You will lose unsaved data. Are you sure you want to continue? »

  Underneath, there is a box that says 'give up unsaved data and close '. When this check box is selected, a button that says closed which was gray now became available to click.

  Thought it was strange.

  Well, it's because you probaby not tried to put an end to such a crucial process before.

  Os the Client/Server Run-Time Subsystem CSRSS is an essential subsystem that must be running at all times.  CSRSS is responsible for console windows, creating or deleting threads, and implementation of some parts of the 16-bit virtual MS-DOS environment.

  It's like saying, "Hey - you don't need this wall in your home, you?

• 'C:windows\system\run1132.exe' when you try to open any program.

  C:windows\system\run1132.exe

  I try to open any program on my pc and all I get is

  C:windows\system\run1132.exe

  Hi kennyken,

  It seems that it is a virus infection.

  ·         Which antivirus program is installed on the computer >?

  You can run the Microsoft to check security scanner for any infection by virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Keys invalid when you try to enter the vFabric license key

  I'm trying to follow the QuickStart in the following doc guide http://pubs.VMware.com/vfabric5/index.jsp?topic=/com.VMware.vFabric.platform.5.0/vFabric/install-repo-install.html

  I installed the vFabric Licnse server on my virtual center server.  Successful installation.  Now when I try to put in my key it says that certain keys in the license could not be added to your inventory.  Invalid key.

  I have triple checked the key and that's okay.  I even tried another key, and it did not work as well.  I'm pulling my section of vmware license keys key information.

  I guess there is a problem with how this validate these keys.  It was my guess as to why you need to install the license server application vFrbric.

  On a hunch, I returned and uninstalled vfabric license server application and installed again with garbage such as user name and password values and he has always said that she installed correctly.  Therefore, there is no validation of your accountinformation in Setup.  After having done that, I turned my back to my pre vfabric virtual Center install and tried to install it again, triple check all my settings.  The same problem.

  Is there a way to check this properly installed?  I went if the Setup log and a few errors, but nothing that I could also determine important.

  As always, your help is aprciated.

  You try to do it with a script PowerCLI?

• System 5 error when you try to use the net time

  I have 2 computers running windows 7.

  I reconfigured two firewalls to allow me to ping them successfully.

  They are on a private network with no other routhers etc. There are IP 10.0.0.10 and the other 10.0.0.20

  I am using net time to synchronize the time of these machines.

  each machine I can successfully run the command to get the time to be

  which is 10.0.0.10 I can run "net time \\10.0.0.10" and get an answer.

  If I try to call another computer, I get a response of 'the system 5 - access denied error.

  We did successfully in the past, but can't make it work this time.

  I am open to any suggestion

  you will need to re sync your internet time. Go to adjust the date/time. then click on the time tab Internet > adjust > select another server in the list > then click on update now. Message at the end should say something like «the clock has been properly synchronized...» "then your good.

• No audio found when you try to use majicjack

  My majic jack has just stopped workin suddenly. It says no audio foud

  Hello

  The speakers work correctly?

  Please follow the steps from the links and check if it works very well.

  http://service.LivePerson.NET/HC/s-61732089/cmd/kbresource/KB-5103370737565873848/view_question%21PAGETYPE?SF=101133&DocumentID=345516&action=view (also applies to Windows 7)

  http://service.LivePerson.NET/HC/s-61732089/cmd/kbresource/KB-5103370737565873848/view_question%21PAGETYPE?SF=101133&DocumentID=345527&action=view

  Please let us know if you need more assistance. We will be happy to help you.

• Message "Make a secure connection or the server unresponsive" when you try to enter online banking.

  Original title: I can't have my bank account online or in some Web sites. I get the message cannot establish a secure connection or the server unresponsive. What should I do?

  My internet is connected to my Dell PC and via a router, I run my ipad is the same problem on both

  Hi Sally,

  1. What web browser, you're helping to connect on the Web site?
  2. What is Internet Explorer? If so, which version?
  3. You can log in to other sites very well?

  If you are using Internet Explorer, follow the steps in the article mentioned below. Let us know if this helped.

  You cannot connect to or connect to Web sites in Internet Explorer secure

  Note: The reset of Internet Explorer removes any changes made to Internet Explorer since it was installed, but it does not delete your Favorites or flows.

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.