System BIOS locked key: 56665863

Similar Questions

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Dynabook SS 1700MY - ' alert: System protection USB key set failure.

  Toshiba dynabook SS 1700MY displays "alert: System protection USB key set failure.

  So here's the story:
  I accidentally tickled my friend that is using his laptop and he spilled his Coke into the laptop.
  I told her to turn it off, and then he wiped his spill in the keyboard.

  Then, when he tried to open it. He opened Fortunately, but it says:
  Alert: System protection failure.
  Set the USB key:

  Me and my friend do not know what it is. Just reply to us if you know what is this 'USB key '.

  We do not know what it is, so please tell us if you know what is the USB

  Dynabook SS 1700MY is not known to me... I guess this isn't a European model for Toshiba laptop...

  The error message looks like a BIOS password. It seems that the security of the system has been compromised.

  Unknown BIOS password can be removed from the laptop user but can be removed by the Toshiba authorised service provider available in your area.
  So you will need to return the unit to an ASP for a password reset.

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• HP Pavilion dv6000 bios lock

  Recently, I bought this laptop from a friend and it has a bios lock, tried different codes out of the site, but now it says system disabled with this code [09310] can someone help me I don't know what to do.

  Hello

  Enter: qrvnf

  or

  exsqquz

  Kind regards

  DP - K

• HP Envy TS: Num Lock key

  Num lock key will not work. It sounds right, alternating up and down. Numbers on the numeric keypad do not work

  Maybe some sort of sticky key?

  I did a hard reset - did not work.

  Uninstalled and reinstalled the keyboard driver - did not work.

  Help, please!

  Hello @RBones2016,

  Welcome to the HP Forums!

  I read your message and understand key NumLock does not work on your laptop, HP Envy. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows. For more information please provide your product model using the link 'find my product'.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• I have a dell 10mc, there is NO Digital Lock key, when I type in alpha it types digital, that this only happens on the internet, microsoft office works fine

  I have a dell mini 10, it has a key "fn" and F1 to F12, but none of them are a digital lock key.   When I type in the search bar in internet explorer, example: www.     I get 456 or 234 etc..    I can type in Notepad and cut and paste it into the search bar to go to a site, so I know that the problem is only when I'm on the internet.   I tried the system restore, but that did not help.   Can someone help me restore this?   Thank everyone, maphillips

  Hi maphillips,
   
  As this problem is hardware specific, I recommend contacting the manufacturer for this function or refer to the manual provided by the manufacturer.
   
  Here is the link to the manufacturer:
  http://en.community.Dell.com/

• "CAPS LOCK" key causes the delay

  Whenever I use the "caps lock" key, a pop up box appears at the bottom right of my screen and I can not continue typing until the box lowers, which always takes at least a total of five seconds.  This creates an intolerable interruption by typing.  How can I get rid of this pop up box?

  What the popup box to say EXACTLY (including all codes)?  It happens only with this key?

  Without knowing what the pop-up box, it is difficult to provide targeted - suggestions, but here are two that might help account given what you have provided.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Maybe that's a problem with the keyboard driver, software, or firmware.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers, software or firmware (and you need to do for the keyboard), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  For anything else (if the above does not solve the problem), we need to know the information in the pop-up box.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Z90D7 Bios locked out

  Z90D7 Bios locked ort

  I have a new Thin Client Z90D7 that took its Bios password locked out. We tried the default password: Fireport

  This does not work for us. Does anyone know what should be the Bios password?

  The unlock key is: C2BAC631

  Thanks for any help you may be able to offer...

  2KWK4U

  Wow! No responses LOL!

  I actually found the problem. He was not with the password Bios "Fireport" itself, but the Wyse keyboard accompanying the Thin Client Z90D7.

  The keyboard has a manufacturing defect which depresses the key 'G' each time you press the button "T". A drop test good with the keyboard, released what was causing the problem, and I'm back in business...

• Disable the CAPS LOCK key.

  I did some research on the web on how to disable that pesky caps lock key, but I thought you guys could provide more reliable answers. I'm reasonably proficient with computers, but my fat fingers keep hitting the SHIFT KEY AND THEN EVERYTHING LOOKS LIKE IT UNTIL I have to REALIZE it AND REVERT BACK and re - type. I do it a lot and it's driving me crazy! Help please!
  Thank you very much!

  I understand that you have found some suggestions on editing the registry - they aren't so bad. If you don't want to download all of the files that allow you to disable the LOCKING of the capital LETTERS, you can create it by yourself:

  1. Press the Windows key + R > type notepad , and then press enter
  2. Paste to Notepad:
     

     Windows Registry Editor Version 5.00

     [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
     "Scancode Map" = hex: 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00, 00, 00, 3A, 00, 00, 00, 00, 00

  3. File > record under...
     • Select to Save as: all files
     • Enter the file name : disable_caps_lock.reg
     • Click Save
  4. Right-click on the created file > merge
  5. Restart your system

  In case you want to turn CAPS LOCK on again, you must remove this registry entry, so you must do the following:

  1. Press the Windows key + R > type regedit and press enter
  2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
  3. Right click on the Card of Scancode > delete
  4. Restart your system

  I guess that it is perhaps the only way to turn off the CAPS LOCK.

  In case you still don't want to do this, Windows 7 offers something different to disable the LOCKING of the upper CASE. You can turn the ToggleKeys, then you will hear a beep when you press CAPS LOCK. To do this follow these steps:

  1. Press Start > Control Panel > access > easy access Center > make the keyboard easier to use
  2. Check the box to enable the ToggleKeys

• Power on password & system disable the key... need fix number of entry

  Presario C700 power on password, after three unsuccessful attempts get - system disable the key: 67653647. Please tell me how to get around and Turn off and if a BIOS upgrade will fix once I'm back at this PoS! Thank you very much!

  Hello

  Pleae try:

  78731289

  Kind regards.

• Windows reduced on dual #2 keep going back to the main screen when the system is locked

  I have two monitors and just got a new system with Windows 8 is installed.  I have a monitor set up as Monitor 2 (just as I did before windows 8) so that nobody walks by can see it... I have confidential information open on that screen quite often - otherwise, it is reduced.  My main screen is set up for the bulk of the work that I do.

  However, whenever my system is locked or falls asleep, the apps/information, I put up on the screen 2, flies back to the main screen when I unlock the system.  I never had this problem before.  I tried to maximize the apps/info to fill the screen, but it does not work: it continues to move... it means that whenever I have unlock my system, confidential information appears on the screen which can be seen by anyone who was travelling.

  How can I stop this from happening?

  Hi Kelleybennett,

  Thanks for posting the request in Microsoft Community Forums.

  It seems that even if the computer is configured in the standby mode, the second monitor stops and windows are going to another. This could be a problem with the video card drivers or pilots of the monitor. Video drivers could be arrested to answer when the computer is set to sleep.

  You can try to uninstall and reinstall the drivers for the monitor and video card drivers and check.

  a. press the Windows key + R

  b. type devmgmt.msc and press ENTER to launch the Device Manager

  c. in the search for Device Manager for the device, click with the right button on the monitor drivers and select the Uninstalloption.

  d. also uninstall video card drivers

  e. restart the computer and check.

  See also:

  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this information helps. Response with status so that we can help you.

• Envy x 360 laptop: HP Notebook System Bios update system (Intel processors) could not be updated

  I get an error of update failed trying to imstall the next update:

  HP Notebook System Bios update system (Intel processors) Impossible to update

  Is there a way to properly update this? What is a critical update?

  Thank you

  Anthony

  Hi @WildFan,

  Thanks for getting back to me.

  Yes, I can give you links to the downloads.

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Hope that help.

• HP 250 g4 laptop: Caps lock key flashes and touchpad not responding

  I need help... caps off button continues to blink or its blinks for a while then it stops and I type capital and common errors of letters in the second place, the touchpad does not when the caps lock key. And it's really frustrating as. ..

  He worked for two days and it's the same problems that happened again