Similar Questions

• Why it is the role of resource is implicitly grant unlimited tablespace?

  referring to unlimited storage space - is it necessary on a daily basis for the developers of the Apex, the user
  
  exec: v_grantee: = "XYZ";
  
  Select the dealer, the privilege of dba_sys_privs where dealer =: v_grantee;
  
  UNLIMITED TABLESPACE XYZ
  
  Select the dealer, granted_role from dba_role_privs where dealer =: v_grantee;
  
  XYZ CONNECT
  RESOURCE OF XYZ
  
  exec: v_granted_role: = "CONNECT";
  Select the role, the privilege of role_sys_privs where role =: v_granted_role;
  -I check which privileges associated with CONNECT system
  
  exec: v_granted_role: = 'RESOURCE ';
  Select the role, the privilege of role_sys_privs where role =: v_granted_role;
  
  CREATE TYPE RESOURCES
  RESOURCES CREATE TABLE
  CREATING CLUSTER RESOURCES
  CREATE TRIGGER RESOURCES
  OPERATOR TO CREATE RESOURCES
  CREATE SEQUENCE RESOURCES
  CREATE INDEXTYPE RESOURCES
  RESOURCE CREATE PROCEDURE
  
  -I check what are associated with RESOURCE access privileges
  
  but the moment I revoke resource of XYZ
  
  There is no more unlimited tablespace to XYZ. I found it quite confusing because none of the roles granted to a UNLIMTED TABLESPACE XYZ, why is it so?
  
  I encounter this problem in 9 and 10 g.
  
  Thank you very much!

  Hello

  Take a look at the thread AskTom following-

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:7540675724395

  In particular, where it says -

  It is so documented that when you grant DBA or RESOURCE, the unlimited tablespace privilege (which
  CANNOT be granted to a role) is granted to the user as well.
  
  It is just the way it works. 
  

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• ORA-00959: NSN_2 tablespace does not exist... But the tablespace is defined in the user temp script

  WHEN I SPEAR IMPDP I GET AN ERROR ABOUT "THE TABLESPACE DOES NOT EXIST.

  THIS space of STORAGE IS in FACT is MORE PRESENT on THE SYSTEM, BUT IT IS DEFINED IN the User1 SCRIPT

  IS there ANYWAY THAT I CAN ASK HIM don't GET THIS TEMP TABLESPACE

  or

  is there anyway I can remove the definition of the user (User1) NSN_2

  OR

  should I just re-create the NSN_2 tablescape

  HELP NEEDED PLS...

  DROP USER CASCADE USER1;

  CREATE THE USER1 USER

  IDENTIFIED BY < password >

  NSN_1 DEFAULT TABLESPACE

  TEMPORARY TEMP TABLESPACE

  -2 Tablespace quotas for User1

  ALTER USER USER1 QUOTA UNLIMITED ON NSN_1;

  ALTER USER USER1 QUOTA UNLIMITED ON NSN_2;                -point in contention

  Directory of Impdp User1/password = dump_dir dumpfile = logfile = LOG.log remap_schema user2.dmp = USER2:USER1 remap_tablespace = NSN_4:NSN_1

  Table main "USER1". "' SYS_IMPORT_FULL_01 ' properly load/unloaded

  Departure "USER1". "' SYS_IMPORT_FULL_01 ': User1 / * directory = dump_dir = setup_02102012.dmp = logfile dumpfile tries .log remap_schema = remap_tablespace of installation: USER1 = NSN_4:NSN_1

  Processing object type SCHEMA_EXPORT/USER

  ORA-31684: USER object Type: 'USER1' already exists

  Processing object type SCHEMA_EXPORT/SYSTEM_GRANT

  Processing object type SCHEMA_EXPORT/ROLE_GRANT

  Processing object type SCHEMA_EXPORT/DEFAULT_ROLE

  Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA

  ORA-39083: Type as tablespace_quota cannot be created with the object error:

  ORA-00959: tablespace "NSN_2" does not exist

  Because sql is:

  REPORT THE NUMBER OF TEMP_COUNT;   SQLSTR VARCHAR2 (200); BÉGIN SQLSTR: = ' ALTER USER 'USER1' QUOTA UNLIMITED ON 'NSN_2 ';  RUN IMMEDIATELY SQLSTR; EXCEPTION, THEN THAN OTHERS SO IF SQLCODE =-30041 THEN SQLSTR: = ' SELECT COUNT (*) OF USER_TABLESPACES WHERE NOM_TABLESPACE = "NSN_2" AND CONTENT = "TEMPORARY"';      RUN IMMEDIATELY SQLSTR IN TEMP_CO

  Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA

  Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment

  Object type SCHEMA_EXPORT/TABLE/TABLE processing

  ORA-39083: TABLE object type: "USER1". "" AVAIL_BY_OPTION_REF "impossible to create with the error:

  ORA-00959: tablespace "NSN_2" does not exist

  Impdp transform = segment_attributes

  Smit

• ORA-01536 Quota of space with the resource and the unlimited tablespace privilege

  Hello.
  I have the following error ORA-01536: space quota exceeded for tablespace, but my landlord has the following grants:
  -RESOURCES
  -UNLIMITED TABLESPACE
  The transaction of tablespace has allocated 150 GB and when it is almost 90% of used space error occurs, but we have auto extend in all areas of storage.
  
  My environment:
  Database Oracle 10.2.0.2
  RAC - ASM
  Version of server Red Hat 4
  
  Best regards
  Rafael Ceolim

  your welcome. If problem still appears to reopen this thread, but for now mark this thread as answered.

• Virtualized ESXi host is not assigned an IP address

  My virtualized ESXi host is not assigned an IP address on a DHCP network. I created it on my physical host with a physical NIC.

  Both its E1000 vNIC is networked with virtually the same Vswitch as the physical host, I created a second Service Console on this vswitch for the ESXi host virtualized, what I need to change the IP of virtual servers to match the newly created Service Console?

  I found a guide on changing the IP address of the vswif on the virtual host, I'm going in the right direction?

  If you run ESXi on ESX (i) then you must enable the mode promicuous on the VM host vSwitch portgroup.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• ORA-39083: Type THAT TABLESPACE could not create object

  Hello
  I am importing a dump file into a new database by the following command line:
  
  Impdp system/***@orcl DUMPFILE is EXP_FUL_H9DEV. LOGFILE = mYLOG.log DMP
  
  But I have this error:
  ORA-39083: Type THAT TABLESPACE could not create object error:
  ORA-01119: error in creating database file ' D:\BASE\H9DEV\DATA\PSDEFAULT. DBF'
  ORA-27040: create file error, cannot create the file
  04002 - OSD: could not open the file
  S/O-error: (OS 21) the device is not ready.
  
  
  In the original database tablespace PSDEFAULT was on D: file system. But D: does not exist on the new server. How to tell datapump/oracle to create it on the same file system where the other new database datafile are (E:\oradata...)? An impdp command line parameter?
  
  Thank you.

  See the documentation for the following impdp option:
  REMAP_DATAFILE
  REMAP_TABLESPACE

  (and perhaps EXCLUDE?)

• Qosmio F30-112 - drive is not assigned a drive letter

  Hello

  Once again I need your help. My drive UJ 846-C of MODEL Qosmio F30-112 CD/DVD can not read. I brought it to the center of Toshiba, that they said its necessary to replace, but they told me that it will cost US $266. So I decided to buy it at the other store. I found the MODEL UJ-875 after I installed the computer hardware installed successfully, my problem is when I try to insert the CD once a few second CD comes out.

  I try to diagnouse with Fix it messege was THE DRIVE IS NOT ASSIGNED A LETTER (MAST * a DVD - R UJ - 875 ATA DEVICE
  The drive is not accessible without a drive letter assigned.

  Can someone help me what to do or what I have to return the unit? is this compatible or not?

  PS by the way my computer has been upgraded to Windows 7 Home premium

  Thank you
  rtmasagca

  Hey,.

  Wait a moment, Matt: do you have upgraded to Windows 7 with the new CD/DVD drive or do you have it before you exchanged the drive?

  You get this message from Windows?

  If so, it seems that it s not installed correctly and you should try removing the upper and lower filters in the registry:
  http://support.Microsoft.com/kb/314060

• Characters are not assigned to the correct keys on Satellite P100

  I just bought a P100 to find that a few key characters from strike are not assigned to the correct keys. How can this be corrected?

  Chain thanks for your suggestion.
  That is why even on my Satellite phone several times there. Different signs like or have been assigned to the wrong keys. I just changed the settings with the same process, and since then, everything is fine.

• Planner - fails with PCSKBD110 - tasks of the keypad of the system (type = 0, subtype = 0) is not supported.

  I am on Windows 2008 - r2 and have implemented the Task Scheduler to run my IBM personal communications. If I'm connected with my admin account, I can right click and run a task successfully or schedule a task and always connected, look at the call Scheduler it successfully. My IBM personal communications settings have a keyboard (img_jump.kmp) file that at the opening of the session I can click on the keyboard and it opens correctly. But, if I plan the task then loggoff box, scheduler of tasks will launch the cmd file, but it will fail with a: PCSKBD110 - of the keypad of the system (type = 0, subtype = 0) is not supported. This same file kmp works fine in Windows 2003. I have no idea why Windows 2008 R2 does not support this file - is there another one that I can download that works in Windows 2008?

  Mr G

  Server questions should be asked in the forum server on Technet

  http://social.technet.Microsoft.com/forums/en-us/user/forums

• If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious?

  If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious

  Reformat the disk and reinstall Windows XP would heal any problem of malicious program with the exception of an infected MBR (Master Boot Record) on the disk.   The F-Secure rescue CD is a tool that allows to remove a MBR infection.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• Event ID 1001 DHCP computer was not assign a network address

  Unreliable Internet connection.  Like event log below.  Any ideas?

  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network address xxx.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  Log name: Microsoft-Windows-Dhcp-Client/Admin

  Source: Microsoft-Windows-Dhcp-Client

  Date: 28/04/2011 09:04:15

  Event ID: 1001

  Task category: State of Configuration address event

  Level: error

  Keywords:

  User: LOCAL SERVICE

  Computer: John-Netbook

  Description:

  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network address xxx.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  The event XML:

    

      

      1001

      0

      2

      3

      75

      0 x 4000000000000000

      

      1187

      

      

      Microsoft-Windows-Dhcp-Client/Admin

      John-Netbook

    

    

      6

      70F1A13DE4FC

      121

    

  I solved the same problem by disabling my connection #2 wireless network adapter (Microsoft Virtual WiFi Miniport Adapter).  I found this by comparing the MAC address listed in the error message with the release of CMD > ipconfig/all.  Noticed that this adapter is continually attempted to communicate with my DHCP server, and I was not still use it.

• When I start the computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error.

  a.o.a, when I start computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." Here again, box comes and says bad googleupdate.exe Image.  I open the cutting tool, then again the box comes snippingtool.exe - Bad Image. Please solve my problem

  Original title: bad image

  Scan the PC for malware http://www.malwarebytes.org/antimalware/

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Receive the error «your computer is not assigned a network address...» "often when I performed a Network Diagnostics

  I have problems to connect certain devices to my computer via my wi - fi. I'm usually able to resolve the problem by running Network Diagnostics, but after awhile, I start to have problems of connectivity network again.

  Whenever I run the diagnosis in these situations, this error in the observer of events (under DHCP-client)

  "Your computer not was not assigned a network address (by the DHCP server) for the network card with network 0x2225D3CC6415. address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP). »

  I currently have the DHCP Server enabled on my router.

  You must perform a full scan of viruses and malware for more security.

  As I said, you can try resetting winsock and tcp/ip which can remove the module from the network chain and I hope that allow access.

  Please see the post by SpiritX: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/programs-cannot-run-without-being-ran-as-admin/b585c119-07fb-47a8-b4a4-e8cccfc88df8