System Restore suspended at 0% - HP Pavilion Sleekbook 14-b001ea - Windows 7

Similar Questions

• HP PavilionSleekbook 15-b009ee: HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64-bit drivers

  I need the Drivers of HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64 bit. Please if someone can sat down me.

  Hello:

  Try the W7 x 64 drivers and software for this model except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-Ultrabook-4-1100/5296027/model/5316650

  Your model uses the Intel HD graphics driver.

• System Restore suspended VPS 64 bit

  "Please wait while your windows files and settings are being restored"

  Running system restore

  How long should I wait before doing anything and can I turned off the pc in this stadium?

  You have to wait until she finishes (it will give you a message) and you certainly can not turn off the machine while he made the restoration or it may not only not work, it may cause even more problems you had when you decided to use the system restore in the first place.  It shouldn't take more than an hour or more depending on the back where you went and what changes are needed.  Be patient.  If it has not finished after 3 hours, then it is frozen and you will need to power down (even if you use the power button to do so).  Then restart and try the system restore using an earlier date.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Pavilion Sleekbook b030el and Windows 7

  Product: HP Pavilion Sleekbook b030el

  A friend of mine just bought a HP Pavilion Sleekbook b030el
  Unfortunately, HP officially supports only Windows 8 for this computer.

  I think that Windows 8 is - by far - the worst operating system Microsoft ever released. Worse than Vista. Worse than Millennium Edition, too. Without a doubt. It is completely unusable and useless on something else that a Tablet, and existing operating systems for tablets are by far better than Windows 8 on this kind of devices.

  Is there a quick way to know if Pavillion Sleekbook 15 - b030el material is fully supported by Windows 7?
  Thank you very much.

  You are the very welcome.

  There should be a program (app) in the menu of apps everything to make a recovery of the DVD set.

  I strongly recommend doing this before doing anything else.

  I only know that if you install W7 on the C:\ partition, the Recovery Manager will not work.

  I don't know what will happen if you install it anywhere else.

  I have no experience there.

  I remove each partition on my PC and install the OS on one big partition.

  I use recovery disks or partitions. I install a windows disk with an OEM or retail.

  With Windows 8, it must be very careful, because there is no product key and used the recovery disc or partition, or they will have to buy a new operating system.

  The product key is now integrated into the BIOS, which makes Windows obsolete COA stickers.

• System Restore error: file spp.dll is not designed for windows or there is an error.

  Original title: download spp.dll

  My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

  How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

  Try to run the System File Checker:

  http://support.Microsoft.com/kb/929833/en-us

• Satellite L500-19Z - system restore fails

  I have a laptop running Windows 7 64 bit L500-19Z. A number of occasions, I tried to run the system restore but have so far failed. Any restore point that I select the system restore seems to work (initialization etc.), but when it restarts I get the message telling me that it failed with the proposal that he could have failed because of an antivirus running.

  I use Zone Alarm, but have turned it off when you try to restore but it makes no difference. Yesterday, I made a mistake one inadvertently lost my wireless network adapter. There is a restore point that I could use to recover, but as I said above it still fails. At least I can get the system restore works, it seems I have to re - install Windows which I am reluctant to do.

  Can someone help, please?

  Hi anicholles,

  In your case I would uninstall Zone Alarm. I didn t make good experience with this program and my firewall view integrated Windows is much better and doesn't make any problem for there part of the operating system.

  Also uninstall or disable the AntiVirus software before you start the system restore.

  To be honest I don t think you have a lot of options if it doesn t work. You can ask in the Forum Microsoft if it s a problem well-known but faster way may be reinstall Windows Toshiba Recovery disk I think ;)

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• Cannot open any file, start the system restore or use my original XP pro CD

  original title: no CAN NOT OPEN ALL the FILES ON MY OS, I can't START the SYSTEM RESTORE, I can't EVEN USE MY XP PROFESSIONAL ORIGINAL CD... HELP PLEASE!

  I HAVE A DELL INSPIRON / B130 LAPTOP WITH XP PROFESSIONAL OPERATING SYSTEM.  I GOT HOME THE OTHER DAY TO FIND MY ROOMMATE ON MY LAPTOP, AFTER THE LECTURES OF THE PERSON TO KEEP YOUR HANDS OFF. I OPENS AND DISCOVERS WHAT HAS HAPPENED. THE PERSON DOWNLOAD FREE DOWNLOADERS VIDEO 4 X, AS WELL AS FILMS AND OTHER JUNK ON MY COMPUTER... ETC I WENT TOO ADD REMOVE PROGRAMS AND DELETED PROGRAMS THAT KEPT DUPLICATE ITSELF. I SHUT DOWN MY COMPUTER, TO THE REBOOT. NOW I GET THESE MESSAGES... "WINDOWS CANNOT OPEN THIS FILE", EXE, FILES,. INK AND WELL BASICALLY ALL THE FILES FILES. I CAN'T OPEN THE SYSTEM RESTORE, ENTER ADMINISTRATOR, I CAN'T EVEN USE MY WINDOWS XP PROFESSIONAL CD ORINGINAL, IT SAYS: ERROR. 3514 LINE, I DON'T KNOW WHAT ELSE TOO CAN YOU PLEASE HELP ME? Thank you

  Hi Colleen,

  Please take a look at the following suggestions for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/cannot-open-any-exe-files-cant-open-any-programs/85545ac1-3822-47AA-b664-e4209c62e9be

• Each system restore try results in the message "unable to restore to that date.

  original title: restore the system to a date in April.

  I have problems w/messages saying: I have a pop up blacker. Checked and pop-up blocker disabled.  My tools bar ie file, tools, etc. disappeared.  Try to do system restore to see if it will fix the problems, but each system restore try results in the message "Unable to restore to this date", still

  I use dates that are "BOLD" and should be allowed to use. What can I do?

  You may be able to substitute the blocker by holding down your Ctrl key.

  Sometimes, the restoration of the system may be blocked by other software... especially of virus scanners.

  Might be interesting to try to run Safe Mode system restore.

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

• Code error WinDef 8050800c and system restore Error 80070002 are related

  Hi all

  During the last weeks of twoo many discussion happened for WinDef - and MSE-error 8050800c.  The problem known inside this WInDef cannot scan or update at required intervals, created havoc and thousands of users are complaining about and at the same time try to find a solution.

  I am one of those users.  The question is not only that MS has not come up with a fix, but also this WinDef exhibits strange behavior.  Strange in a sense that one day working and the other is not.

  At the same time, people started having problems with the system restore in Vista, where everything is working correctly, except for the fact that the system will be back on the date indicated, coming with a notification "unknown error" and an error code 80070002.

  I am one of those users too.  Looking around the solutions both almost simultaneously and recent issues that hit my pc, I found that the solutions proposed by the MS people are circling around the keys to register ProfileImage.

  These questions are treated as separate issues, I think they are related.  For example, in this forum, regarding the error of WinDef a solution has been proposed recently around the ProfileImage.

  But a similar thing has been proposed by MS team, study the problems of SR points.

  Please see these links.

  WinDef: http://social.answers.microsoft.com/Forums/en-US/msescan/thread/a5810b32-5470-46aa-8be4-634f06064131

  System Restore/backup: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx

  I appreciate your point of view and a possible solution to these two problems please.  Note that I already checked my ProfileImage values.  Well, all are created, except for a key that is where it seems completely empty.

  Thank you very much in advance.

  TrDo.

  Hello

  Thanks for the information; your efforts are very much appreciated.

  This happens when the Windows Vista Restore Wizard cannot access the files due to access denied or restore points missing or damaged.

  To restore the computer to a previous state, make sure that there are no corrupt restore points and backup Windows and Volume shadow copy services are also running.

  Connect to the computer as an administrator and follow these steps.
  1. start Windows Backup and Volume Shadow Copy services.
  a. Click Start, type services.msc and press to enter.
  b. search for Windows Backup and Volume Shadow Copy services and start them.
  2 start the computer in safe mode and open the system restore and check the result.
  Safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Windows mail after a system restore?

  I have windows Vista and I had to do a system restore to fix my computer and he unhooked my windows mail and he asked pop2 and smtp for servers and I don't know what I went in to raise my windows mail.  How can I fix?

  If you would stick with Webmail, you should be able to answer an ad to Craigslist using Yahoo with this workaround.

  How can I make Yahoo! Mail my default email application?
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html

  And you can always copy the link of the answer and paste it into the address bar of your browser to respond to a Craigslist add also.

• Why my phone was telling me my copy of windows and not authentic after two years? I tried a system restore but it did not help

  Why my phone was telling me my copy of windows and not authentic after two years?

  I tried a system restore but it did not help

  Hello

  1. Windows you receive not genuine error?
  2. Did you do any software or hardware changes on your computer before the show?
   
  Follow the below mentioned article:
  Genuine Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• (Windows 8) System Restore how can I?

  Guys,

  I was see several issues since windows 8A are released on the no sound, Apps, and other small problems with the operating system and laptop.

  System Restore is a software available in all versions of Windows 8. System Restore automatically creates points of restoration, a memory of the system files and settings on the computer to a point in time. You can also create a restore point. Then, when you use the system restore to restore your computer to a point in time before the beginning of the program, the System Restore returns your computer for files and settings of the restore point. Your personal files and documents are not affected.

  Most of these features worked fine until an installation (Windows), or just randomly stopped working.

   

  As a general rule, when a features quit working all of a sudden the system restore will bring the laptop at a time where the features on the laptop was working.

   

  When you do this step, you must be sure to save any information or downloads you recently installed on a flash drive or any type of removable media.

   

  System Restore is a great feature that HP and other manufactured goods have to give you the possibility of not losing the functionality at any time while having the laptop.

   

  

  First of all, here is the document that will help guide you in this step.

  While taking these steps, I must warn to re-register you please any information you have recently saved or downloaded.

   

  THX

  Hope it will be useful for you guys!

  THX

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• System Restore, deletion of the photo and file rights issues

  I had trouble with my phone now for about half a year. Awhile back on downloading a program, my computer began to tell me that I didn't have 'rights' to remove a file, access a folder or even to open a program, when I have full admin on her rights. This problem has persisted, but not as much as he used to.

  The following problem was born about two months ago. I noticed that my laptop didn't is more let me restore the system yesterday. The day before the current day was the only day where he had registered under a restore point. My laptop still has this problem. Not only that, but every time I do a system restore it says failure of the resolution.

  At the beginning of this year as my C: drive grew low space I created a picture file on my D: drive and transferred all my current photos to the new folder and kept the old one on the C: drive, but deleted all the images in the default image folder. Now tonight, I deleted a program out of my D: dive that was installed a year ago that I no longer use, and after removing the photo on my D: drive folder wiped. There are thousands of images recorded in this issue said. I tried a system restore to recover images, but the restoration of the system, as said before, has failed.

  I would appreciate help in how to conquer these questions. There is not much I can do until my images are retrieved, so fast response and the help is even more appreciated.

  'There not much I can do so that my images are recovered'

  You asked for advice, I gave him.

  And I said not to use the same machine:

  "
  1 stop using this computer; as you're going to overwrite deleted files, which are not deleted, until they are crushed.

  2 preference slave to your hard drive in another computer, install one of the programs of recovery in this computer and read your disk from there.

  3 or put your hard drive in a USB external hard drive enclosure, attach to another computer and do the same as 2.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  System Restore is not involved in the data;

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  "System Restore is not intended for the personal folders backup, so it cannot help you recover a personal file that has been deleted or damaged. . You should regularly back up your personal files and important data using a backup program. »

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner