HP Pavilion Sleekbook b030el and Windows 7

Similar Questions

• HP PavilionSleekbook 15-b009ee: HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64-bit drivers

  I need the Drivers of HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64 bit. Please if someone can sat down me.

  Hello:

  Try the W7 x 64 drivers and software for this model except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-Ultrabook-4-1100/5296027/model/5316650

  Your model uses the Intel HD graphics driver.

• HP Pavilion g6 - 2248ca and Windows 7

  I just Pavilion G6 - 2248CA, tried Windows 8 for awhile.  I can't stand it, call me old school, but it all seems like much more of a pain in the ass to do anything on this operating system. So I put away.

  I have not installed windows 7, no problem, but Im having a lot of difficulty getting things to work. mainly, the 2 slots usb on the left side. some of the function keys IE volume up volume down, play pause on the keyboard, and where the f-1 through f12 keys.

  Device Manager can't find the drivers for the following items:

  Ethernet controller

  PCI device

  SM Bus controller

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  Now I really don't like too much for f1 - f10 function keys work, but I would get the work off of usb.  The HP's website to get the chipset drivers to take better advantage of these work, but I'm not sure that this chipset uses this laptop.

  Someone at - it solutions to make this flawlessy of laptop computer work under windows 7 cause really, I can't install windows 8 wannabe this tablet.

  Thank you.

  Hello:

  First install the chipset driver and restart.  First download listed.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102604-1&CC=US&DLC=en&LC=en&os=4063&Product=5283212&sw_lang=

  Card reader:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5262606&prodNameId=5283213&swEnvOID=4063&swLang=13&mode=2&taskId=135&swItem=ob-102497-1

  Software quick launch:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104698-1&CC=US&DLC=en&LC=en&os=4063&Product=5275092&Query=2101%20sk&sw_lang=&Tool=

  Paul

• HP Pavilion p7-1443 and Windows 7

  Hello

  I just bought the HP Pavilion p7-1443 with Windows 8.  I was wondering if it is possible to replace Windows 8 with Windows 7 on this computer.  Has anyone tried this before?

  Thank you

  Serrano

  Hello:

  It should be doable.

  You can use the drivers of this model that has the same motherboard as the one you have.

  http://h10025.www1.HP.com/ewfrf/WC/Product?CC=US & DLC = in & lang = to & LC = in & Product = 5197676&

• System Restore suspended at 0% - HP Pavilion Sleekbook 14-b001ea - Windows 7

  Hello

  I bought the Pavilion in 2011, but the OS has become corrupted during the weekend. Performing a system restore. I have the screen of "Restoring the Factory image" and a "tick" against the first 3 options (reformatting of the windows of your disk partition, copy the files needed to restore the hard drive and reinstall the original software"

  However, after more than 12 hours (night on the left), the progress is always showing 0%, and the cursor is a blue rotating circle.

  If I recycle the power that I have no doubt that I will not have a 'C' drive due to the first part of the restoration of the Windows partition but the ideas of formatting?

  Thank you

  Robin

  The easiest way is to download Microsoft Windows 7 USB\DVD download toolstore. Once you have done this, you will need to download an iso image of the operating system that was originally installed in your sleekbook from there.

  Use the Windows 7 USB\DVD download tool to create a windows usb Installer.

  Connect Windows usb Setup, turn on the sleekbook and immediately press the ESC key. In the start menu, choose boot options, and select Setup from usb as a boot option.

  Select repair your computer.

  

  

  Choose the Startup Repair tool

  

  

  

  After clicking on finish, your laptop will reboot and you should be able to start Windows normally again.

  Best regards

  ERICO

• G6-2231dx Pavilion: Pavilion g6-2231dx and Windows 10 lack of network connections

  Then...  Where are the pilots 10 compatible of Windows for the g6-2231dx Pavilion?  I know that this OS was just launched yesterday, but an excerpt from the developer is available for some time now and any reasonable person would expect a company as big as HP now have their stuff ready for this deployment.

  The latest version of the operating system available on the menu drop-down page downloads & drivers of the g6 is Windows 8.1.  While the Realtek PCIe FE ethernet family and drivers Ralink RT3290 WLAN view and proclaim that they are in perfect working order through the Device Manager, or a connection to the local area network or WLAN connection appear when I opened the section "Manage maps" of the network and sharing Center.

  I've tried so far to solve the problem of the measures:

  Searched in vain for the site of HP compatible drivers, or at least an explanation of why it is not all the drivers available for Windows 10 on my device. By-the-way, there are a lot of dead links on your site.  Did the same to sites Web of Realtek and Mediatek without any result.  Googling has not helped much either.

  Downloaded and installed the latest drivers Windows 8.1, after uninstall of each device (as well as the removal of their files in the system directory) of the Device Manager with a reboot between the two attempts, since the HP website as well as websites of card manufacturers.  No results.

  Updated drivers for each devices via Device Manager and manually that it points to the directory where I extracted the drivers. No results.

  Disabled features, that I had to do to solve the problems with adapters flakey on the latest operating system from Windows to save energy.  No results.

  Rolled back drivers through Device Manager.  No results.

  Uninstalled devices again, tried and then install the drivers in compatibility mode. No results.

  Tried to install the Realtek drivers which claimed to be compatible with Windows 10 that I acquired through the Lenovo Web site. No post no installed errors, but network connections still do not come under the list, while continued to report as work awesomely by Device Manager!

  Editing a registry string by a suggestion in another forum support, but for developers of Windows 10 preview who proposed to change the string of 'dela Jacques = 7' where it was previously set at 5, in my situation.  No results.

  The state icon of connection in the system status bar always has a big, big, red X through it, when I left click on the icon, if waiting to see at least a list of available wireless networks, it is completely empty, with the exception of the option to turn on or turn off the airplane mode (Yes, I made sure it's off).

  It is quite frustrating and I know this isn't quite exclusive fault of HP/Realtek/Mediatek and I'm sure Microsoft has a big had to play in a no-so-finished product, but geeze!  Any help out there?

  MInutes after posting here, I found a solution to the problem of another Web site. This solution is relevant to those who have had a VPN software installed on their system during the upgrade of Windows 10. It may be worth a try, even if you don't have a VPN software installed prior to the upgrade. I followed the instructions below and after you remove both registry key and uninstall the DNI_DNE, the network adpaters Protocol (ethernet or wireless) immediately turned on and connected automatically without having to restart the computer.

  If you have unsupported software VPN installed on Windows 8.1 when you upgrade, you may experience this problem.  We are currently working on a fix.  To check if that's causing your problem of networking:

  1. Click the Start button, then click command prompt (Admin).

  2. Type the following command in the window and press ENTER:

  3. netcfg - s n

• This will display a list of network protocols, drivers, and services.  Check if DNI_DNE is listed in the output.  If this is the case, this problem applies to you.

• If DNI_DNE is present in the same command prompt window, type the following commands to solve the problem:

  Reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
  
  netcfg - v u dni_dne

• If you receive the error 0 x 80004002 after execution of this correction, or the registry key has not been removed or the key that should be deleted is slightly different.  Open Regedit and navigate to the key: HKEY_CLASSES_ROOT\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3}.  Delete it if it still exists. If this is not present and you still not received this error, just reply to the post.  We may contact you to help identify the cause of this error.

Slight modification of my original posting. Please remove the ' / going ' from the code as it is does not delete the subkeys, only values. So, if you have dni_dne and tried this fix with an error result, please try this again with the following change in the original post:

reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /f

• HP Pavilion dv6-6b56er and Windows 7 x 64 Professional

  Hello.

  I bought Pavilion dv6-6b56er with pre installed Win7 x 64 Basic, which is not convenient for me, because of its lack of features. So I made a full backup of the hard disks in the Pavilion and removed all software it. Then I installed Win 7 x 64 Pro and facing difficulties regarding the drivers of USB 3.0. Everything else works fine. I know that HP is not responsible for all of the experiences with the software that is not pre-installed, but I have a few questions.

  First of all, should what driver I install to ports USB 3.0 flag? To the download page, I found three different options:

  1 Renesas.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99763-1&cc=us&DLC=en&LC=en&...

  2 NEC.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en...

  3 fresco.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102204-1&cc=us&DLC=en&LC=en...

  and

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100237-1&cc=us&DLC=en&LC=en...

  The first two were installed (I mean they CAN be installed), the third - not at all settled. So what is the reason to put it on the download page?

  We're crazy. When you try to install the package with driver NEC, installation master tells you, that it is pilot of Renesas. There therefore no NEC drivers on the download page at all. Why I paid so much attention to it? I installed Everest, so I know what driver is needed. He tells me that I "NEC uPD720200 USB 3.0 Host Controller". Thus, there is no driver available on the download page for NEC chipset and we have NEC chipset inside.

  During this time, Windows Support Center offered some NEC USB 3.0 driver (http://ftp.hp.com/pub/softpaq/sp47501-48000/sp47677.exe ).

  So, who's right?

  The second question. If attempts to connect to the USB 3.0 a compound device (e.g. usb hub), then in "devices and printers" appear strange devices with the label "no data". If Renesas driver has been installed then ' USB 2.0 hub "appeared, and so Windows proposed NEC - then «NEC Electronics USB Hub» The County of strange devices depend on the number of devices connected to this unit composed. It's my main problem - these strange devices.

  So I came to a dead end. Any ideas to fix this?

  Any response will be appreciated.

  PS. Sorry for my bad English.

  The Recovery Manager is indeed on the hard drive. The version that is on the dvd discs doesn't have as many options as the original get the version of the partition.

  If you use recovery factory reset it will install all the original drivers and also recreate the recovery partitions. After finishing of the recover and have restarted the PC, you should be able to use the F11 key to access the hard disk again.

  You will need to reinstall the UEFI utility using the download from the section web software support and drivers under utility-tools. Given the usefulness of UEFI hard disk is a good thing.

• HP Pavilion g6 - 2316sr and windows 7

  Hello

  I wonder, where can I get drivers for my HP Pavilion g6 - 2316 sr for Windows 7 x 64? The only drivers that are available on the site, are drivers for windows 8. I need all drivers for the functioning of the laptop.

  Thank you.

  Best regards
  Alex.

  Hey, Alex:

  First install the amd chipset drivers and reboot.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Then all the W7 x 64 drivers and software of this model will work also on yours.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THE ABOVE MODEL FILES

• HP Pavilion G6 2306el and windows 7

  Hi all

  I bought a HP Pavilion G6 2306el that comes with windows 8, and I HATE it! I want to downgrade to windows 7 pro, but I'm not sure if all the required drivers are available. I tried yesterday, but a number of things that LAN driver PCI device drivers were not installed and the pc seemed to be pretty slow makes me think something was still wrong. No idea if this computer is windows 7 compatible? HP Web site shows that it supports windows 8 and ubuntu only. If so, technically, why that?

  Thank you very much

  Max of the North Italy

  This means that you have started the Windows installation media by selecting a "source of inherited start" as opposed to a 'source of boot UEFI.

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You should ENABLE 'Secure Boot' and 'Legacy Support' in the 'BIOS Setup boot secured' on the settings below page before you may try to install Windows 7;

  

  In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  Please use a Windows 7 SP1 disc for the best installation experience. If you need a Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.

  Please click the White Star of KUDOS to show your appreciation

• HP PAVILION DV7-6199US and WINDOWS 8

  I have no errors, but to be honest, I have no software to install HP with Windows 8. I need my drivers for my switchable graphics as well as all my other components. HP, please, tell me that you will be kind enough to provide these things for my nice HP computer. Thank you.

  Hey guys,.
  
  At the moment Windows 8 pilots are not officially supported for these laptops.
  
  I'm sure they test the books right now, and if everything fades there should be no problem with them releasing the pilots.
  
  Please bare with them while they find a way to provide you with the drivers.
  
  THX

• Pavilion Slimline s7700n and Windows XP

  s7700n supplied with Windows Vista.   I am trying to install Windows XP, and when installing it came with an error that it cannot copy the two files.  Rpcrt4.dll and shell32.dll.   You should ignore these files in order to continue to install, but when it reboots it says it cannot find them (of course), then stops.

  Tony,

  OEM operating system installation disks are not the same as the operating system retail installation discs. Sometimes, the OEM drives are built with differnet pilots and other tips for brands and models of PC OEM.

• HP Pavilion dv6-6077er and Windows 8

  Is - this HP is going to add Windows 8 x 64 (as pilot) support for HP Pavilion dv6-6077er laptop? If so, when?

  Hey Alex.

  Try your luck here

  http://Forum.NotebookReview.com/HP-drivers-software-Forum/556469-drivers-HP-DV6-4xxx-DV6-6xxx-dv7-5xxx-dv7-6xxx-envy-14-2xxx-envy-17-2xxx-Intel.html

• Pavilion dv 9420 and Windows 7?

  Im proud of my laptop and how my old self built desktop running Windows 7.

  Does anyone have this race?  I prefer to 64 bit.

  You simply use the Vista drivers?

  Everything went wrong?

  If you upgrade most of your drivers installation will remain intact from the Vista installation. If you perform a clean installation, you can probably use most of your Vista drivers. On AMD machines in particular, running Windows Update in Control Panel also works pretty darn good to find updated drivers... after installation of Nvidia Chipset of your Vista page.

  Daniel also wrote a guide to Win 7 for dv6000/dv9000 series that you can refer to if you have missing drivers.

• Pavilion dv6-6145dx and Windows 7 - touch pad sensitivity

  Cannot type without cursor jump around randomly. I looked for the setting parameters and they do not actuall exist. HP chat support has been no help. They suggested downloading the new configuration BIOS and still questions. Thanks for your suggestions.

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52661.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Let's see now if you have the possibility to set the sensitivity to the touch - this is described in the document at the link below under the heading 'Set touch sensitivity'.

  Configure the ClickPad.

  Kind regards

  DP - K

• Pavilion X 2: upgrade memory Pavilion X 2 and windows 10 update HELP!

  First of all I'm not a computer expert so the answers in plain English please. Thank you.

  I just bought one of these for my daughter for Christmas.

  I read that memory is low. It has 32 GB.

  First of all what is the best easiest way to upgrade memory (micro sd card)? If so can what bits of information I keep on it?

  Then I upgraded to windows 10. Is a 32-bit or 64-bit system.

  Someone had problems with him?

  Finally of office would what version you recommend.

  Thanks in advance

  Frank

  I have

  I assume you mean the 10 x 2 inches?

  -What is it?

  http://store.HP.com/us/en/ConfigureView?catalogId=10051&urlLangId=&langid=-1&StoreID=10151&catEntryId=1052151&quantity=1

  Your only option for adding storage is with the SD card reader, which is actually a very good option. Get a fast SD card high capacity

  http://www.Amazon.com/SCT-digital-ultimate-extreme-S-F128-RT/DP/B00EOHX9LC/ref=sr_1_1?ie=UTF8&QID=1447958468&SR=8-1&keywords=SDXC+128+gig

  That stick to the machine and shaped into a literate player. Then you can go and change the location of Documents, images, video files in Windows 10.

  http://Windows.Microsoft.com/en-us/Windows/redirect-folder-new-location#1TC=Windows-7

  Above is Windows 7 but Windows 10 still works the same. Move the files to the SD card, together is the default download location for the browser, etc.

  Ask in terms of memory, but you mean that storage. The RAM (sharp) of 2 GB is not extensible. It is an Atom processor but the next generation and it is 64-bit. The Windows installed 10 will be a version 10 of Windows 64-bit edition, not some watered down Michael tablet thing. It can run Office 2016 and if she is a student of her school could have an agreement on this subject, or you can look in the student Office 365, version which is I think that $6 per month or $80 all the in.

  http://www.microsoftstore.com/store/msusa/en_US/pdp/Office-365-University/productID.275549300?tduid=%28da4fa9d658c727bb586fc7317d1a57c7%29%28256380%29%282459594%29%28SRi0yYDlqd0-9WcQ5r5xhACpwtL96.k5cA%29%28%29

  Enjoy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.