System_Service_Exception BSOD. Week started it y a. old laptop less than 5 months.

Similar Questions

• 15 - f010dx: Notebook is less than 2 months old and now won't turn on.

  I have a HP Pavilion 15-f010dx it's a little less than 2 months and is rarely used for light work. This morning I went to for use and the computer has been insensitive. I held the power button down and run to make sure that the computer was not "slow" mode. There is no display on the screen, "Wifi (airplane mode)" button was lit in orange colour and the 'Caps Lock' button was blinking. I assumed that the battery needs to death during the night, so I plugged the AC adapter and let it charge for two hours before trying to see if things would turn out. I tried on and I saw the same lights come on in the same way that I used the additional observation that I na could not pay attention the first time hear the computer will start and then stop Turing, this action repeated for quite some time, all while the lights stay on. I removed the battery from the computer and unplug the power cord I pressed the power button and held it for a minute or two, I plugged the cord back and the computer has been insensitive to this action. I have replace the battery and tried to turn it on again and I went through the same thing. The lights for the 'WiFi' would be on, key Caps Lock flashing and I hear the system starts for a few seconds and then off. I'm not sure what could cause this problem and I'd love to help, try to understand this.

  Ok.

  Time to use the warranty.

  If there is important data on the hard drive, it is highly recommended to use a hard disk enclosure or a SATA to usb connector. Once the hard drive in the enclosure or conmnevted to cable, you can connect the hard drive on another PC of Windows and copy data, so it does not get clean bythe customer Service

• Brand new laptop less than a week old keeps freezing when you use 3 dongle mobile huawei E122 briadband dongle. Although even I have the latest version of the software

  as above but 3 it's a compatibility issue with windows 7 this isn't up to 3 I'm goin' round in circles here lol can help please

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• drive hard crash "fatal error" less than 9 months old

  Two laptops in the 4 months of each other.

  both were quite new, abuse do not used for general navigation and the game...

  First an AlienWare laptop "Gaming".

  Second Inspirion HP with touchscreen

  I was wondering if these laptops have been converted vec "dummy" drives... limited lifetime ESP... coded crash?

  Having a really hard time getting all the answers.

  Can you give me some info. ? Please?

  [Moved from the community centre of Participation]

  Hello

  I'm sorry but you must contact the respective manufacturers about problems with their equipment, or ask their Support Forums.

  How to contact Dell:

  http://www.Dell.com/support/contents/us/en/19/category/contact-information

  Or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  You can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  If you got less than a month ago, it is still under warranty of 90 days (I think), so take it back to the Apple Store you got OR no matter what Apple Store close to you if you bought it online.

• When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• I'm less than 2 weeks in my DW of the trial and I need to re - install the creative cloud Desktop App. It will start the download, then just disappears...

  I'm less than 2 weeks in my DW of the trial and I had to restore my computer (PC) due to a software conflict.  I went to re - install the creative cloud Desktop App and it will start downloading and then just disappears... I have no problem the first time around. I tried to restart my computer, turn off the firewall, etc. Did the same thing. Help, please. I would like to end my trial.

  Temporarily disable the firewall.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.
  

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove? Rename it to Adobe Creative Cloud centenarians.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list. If you use the Adobe Cleaner CC Uninstaller tool.

  If not in the list, then download and install the Adobe Creative Cloud application and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• How to get the ISO week number week start date

  Hello
  
  I have a table with the following structure

  Year    error    Week1     week2   week3 ......week53
  2012       error1     2           4         2             1
  2012       error2    3          0        1                 1

  I was hoping to get something like select year, error, week 1 | "Start date of the week which is a Monday of this week" ", semaine2:" " Earlier this week, Monday again ",... table week53"
  
  Any suggestions please?
  
  Thank you
  Sun

  Hi, the Sun,

  To see what a week N started, add 7 * (N - 1) days of the beginning of the year. (By definition, the beginning of the ISO year is the beginning of week 1 of the ISO year.)

  To see when the week started 22 of the current year:

  SELECT  TRUNC (SYSDATE, 'IYYY') + (7 * (22 - 1))
  FROM    dual
  ;
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

• get the calendar week start date

  Hi all
  
  Is there a function or method in oracle 11g to get the calendar week start date? for example. If 1st week begins January 3, 2011, the function should return January 3, 2011.
  
  Thank you
  Sunita

  Try this

  SQL> select next_day(trunc(sysdate,'YYYY'),'SUN')+1 from dual;
  
  NEXT_DAY(
  ---------
  03-JAN-11
  

  The solution given by Mahesh is a gross... 3 jan was just for example... not to hardcode

• Cannot read the old laptop hard drive attached again, says disk needs to be formatted

  Original title: hardware device

  I am trying to up load my old laptop the laptop to my new computer hard drive so that I can access my old files, but it is endlessly with need to format the new device this will clear all data? It only allows me to open the old hard drive at all? Please help I really need to have access to my old hard drive through my new laptop I have no other way to get the information out.

  Hello

  Yes if you format the drive it erases it's clean. Did you put the drive in the computer as the 2nd disc
  If the computer still starts off the coast of its original disk? It's easier to do on a desktop.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or another USB
  readers. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This can be done with the player in the)
  original laptop. If the drive is viable (not totally dead).

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------------------------------------------------

  The reader might have been damaged and may not be easily accessible. There are professional
  companies that can recover data off a dead drive if it is a costly process.
  Check with a real computer store (one that makes its own service in the House and no leeks)
  and displays a Best Buy or other stores) or system manufacturer support.

  I hope this helps.

• super slow old laptop with too many startup programs

  RUNNING XP ON AN OLD LAPTOP WHICH IS REALLY SLOW, HOW CAN I DELAY OR SAFELY REMOVE EXCESSIVE STARTUP PROGRAMS

  Follow the tips below and also answer the following questions: brand and model of the pc, current antivirus, operating system and service pack.

  Stanley Zhang tips

  Will probably want to clean this machine...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• recently updated my old laptop because my other crashed. When updates have been loaded in my old one, he too crashed. Any one out there I have this problem.

  is there a way I can choose which updates are downloaded instead of make him automatically. The reason why I ask is that there are 2 hours, I turned on my old laptop that sat for a year. It was way outdated, and while I was waiting to do this, my computer creashed and all I had was a blue/black screen. It took me an hour to enter the restore safe and get it back. Now, it wants to load these same updates again, and I'm not wanting to go through this again.

  is there a way I can choose which updates are downloaded instead of make him automatically. The reason why I ask is that there are 2 hours, I turned on my old laptop that sat for a year. It was way outdated, and while I was waiting to do this, my computer creashed and all I had was a blue/black screen. It took me an hour to enter the restore safe and get it back. Now, it wants to load these same updates again, and I'm not wanting to go through this again.

  1. Click Start, type Windows update in the search box, and then click Windows Update in the programs list.
  2. In the left pane, click change settings.
  3. Select the option you want.

• Old laptop will not come to the top. To get the files and documents for the new laptop

  My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop? Can I do this using a USB Flash drive? Thank you

  Saturday, January 22, 2011 18:39:30 + 0000, ashevilletom wrote:

  My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop?

  I do not know. The answer depends on what's wrong with the old.

  Can I do this using a USB Flash drive?

  # If you can not start the old laptop, you cannot transfer files from it
  to the USB.

  If the problem with the old laptop isn't that hard drive has
  has failed (and that's a big 'if'), you can pull the hard drive.
  and get an external USB enclosure. Having done this, you can read
  It is on the new laptop and copy files from it.

  Ken Blake (MS-MVP)