System services error fatal r710
I am so kind new to this generation of dell servers (710). I am trying to load the UEFI bios and enter the system services, but every time I get a x 64 exception type 000000006! Error.
I bought this used server so only amazes me that this has happened. What is the reference for this?
He has undertaken DRAC6 none installed SD card, 24 GB of ram (ECC) and 2-processor xeon QuadCore 2.27 and virtualization is enabled.
I have attached the correct screenshot of the error.
Any help on that would be great.
Hello.
Attempt to update the firmware of the controller of life cycle and if not to run the regulatory life cycle repair package. This should allow you to access system services. http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=80XJ1
Tags: Dell Servers
Similar Questions
-
Compaq mini 700 enter current password, system error fatal hatled
Compaq mini 700 enter current password, system error fatal hatled, please help me!
Try MC.
e9lo3o345f or e9lo3o3r5f
3rd letter tiny L.
4th and 6th letter lowercase o.
Use the code that works for go into BIOS.
Disable all passwords that are enabled.
IF demand for CURRENT password using this code.
REQUEST NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
I have a password check has no fatal error... System. Error CNU9293HWR on hp mini 1151nr can someone help me please
Hello
Please be aware that this is not supported by HP and try your hand at your own risk.
Try to enter: e9lo7ofzdb (to be noted that the 3rd character is a lowercase L)
Kind regards
DP - K
-
As soon as I turn on my hp computer mini that it says enter current password.
After that I returned it 3 times it is said.
password check ISP.
error fatal system shut down.
cnu8474wv1
Any help is very appreciated
Dear customer,
Welcome and thanks for posting your query on the Forum from the HP Support
Looks like you are looking for a password here, we will surely help you with this problem
Please try this password = e9luvxvd63
Steps to follow:
1. use the posted above unlock code to access the BIOS
2 disable all passwords that are enabled
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
6. then exit the BIOS saving & exit option to save the changes.
Troubleshooting:
Incase if the password does not work please try a Hard Reset as follows.
1. power off the laptop
2 disconnect the power adapter and remove the battery
3. press the Power button for 30 seconds
4. connect the power supply/AC adapter (leave the battery for now) & start Notepad
5. If now see you a password, please enter the same password I've shared before and press on enter
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star KUDOS left to say thank you*.
Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.
Thank you
K N R K
I work on behalf of HP
-
Please help me, system error fatal entered current pasword stopped CNU93332K3
Hello
Please try (all lower case):
e9lofff7sf
Kind regards.
-
Original title: could not start the Service "Windows Defender" (WINDEFEND)
When you try to install Windows Defender, I get an error message that
"Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.
How can I check which privileges I have and I need?
I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.
Help please
Hello
This error message is because you have Norton installed on the computer. See the for more information section below.
http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_USLet's try the steps and check them off below if it helps.
Step 1: You can try to uninstall Norton and then check if the problem persists.
Note: Reinstall Norton after verification.
Reference: http://support.microsoft.com/kb/307895Step 2: Change the registry value and check.
a. Click Start, type regedit.exe and press ENTER.
b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
d. enter 0, under value data, and click on the OK button.
e. close the registry editor.
f. restart the computer.Registry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Compaq mini 700: Compaq mini 700 laptop error fatal system shut down.
Compaq mini 700 laptop error fatal system shut down.
CNU9144WRX
can you pls give me a current password. my mini doesen´t have a.
THX
Hello
Enter: e9lo3vvdb4 (to be noted that in both cases, the 3rd character is a lowercase L)
or
e9lo3vvdbr
Kind regards
DP - K
-
Ideas:
- You have problems with programs
- ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi sanjeevkode,
Thank you for visiting the website of Microsoft Windows Vista Community. As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.
VMware communities: http://communities.vmware.com/home.jspa
In the meantime I suggest you try these options / methods
IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.
Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start
Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID
Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you
Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.
The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.
Let me know if it worked.
Hope it will be useful.Thank you and best regards,
Vijay K - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Error System Service Exception blue screen BCCode: 3B
For about 3 weeks, my Vista 64-bit machine has started meeting with a BSOD. I met four accidents in 3 weeks. However, this does not happen very often as a point, I went a week and a half without crashing. I ran MemTest86 + for 12 hours, with 10 passes completed without error reported.
The accident occurs generally when I have several programs open, which includes a game like DOTA 2, Spotify, Skype and Google Chrome.I've updated my network driver and I just updated my video card driver, but it remains to be seen if this will help. Looking for a simple list of things that I can start going through, starting with the most common causes of this type of system Service Exception BSOD. You will find additional information below:Signature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Additional information about the problemBCCode: 3BBCP1: 00000000C 0000005BCP2: 0000000000000000BCP3: FFFFFA600C5BFF10BCP4: 0000000000000000OS version: 6_0_6002Service Pack: 2_0Product: 768_1Information about the server: 448e9b3d-41d5-40c5-bd68-1a4f420dafe8I also have a dump file mini that I could provide if necessary.Associated with the Solo - 1 Sunbelt Personal Firewall SbFw.sys driver. I would remove at least to test.
Please remove the viewing programs of CD such as Daemon Tools and Alcohol 120%.
They use a driver, are in your dmp, called c:\windows\system32\drivers\sptd.sys, which is known to cause a BSOD.
Use this program to uninstall SPTD DuplexSecure
-Http://www.duplexsecure.com downloadsWhen you are finished, you can use this Freeware:
MagicISO Virtual CD/DVD-ROM (MagicDisc) instead
http://www.MagicISO.com/download.htm
-
HP Mini 110: Error fatal system interrupted CNU941399D
Enter current password at startup, (Windows 7 starter, do not know if it is 32 or 64 bit).
Error fatal system interrupted CNU941399D
Hello
Enter: e9lov3foot (3rd character is a lowercase L)
Kind regards
DP - K
-
I'm restarting SQL server, what I used to do via the following command line:
net stop mssqlserver
net start mssqlserverHowever, I am on a new Windows 7 machine and I get the following error when I try:
net start mssqlserver
System 5 error has occurred.Access is denied.
My account is a member of the administrator group, and I can restart normally through the Services Control Panel. I have tried to turn the UAC settings all the way down, but still this message.
(This also fails if I try to use PowerShell.)
What should I do to be able to restart the services via the command line?
Thank you
-PeterI had exactly the same problem:
1. new installation of windows 72. net start MSSQLSERVER fails with "Access denied" from the command window, but works at the start of Service Control Manager3. connected as a user of Directors of the Group - same account used for the automatic start4. I tried the above steps to register. They do not work.5. I tried to settle my UAC account at the lowest possible level, as recommended in another forum. It also did not work.I was amazed by the number of desperate people with similar problems - and apparently some resolutions there. I've used Windows 3.1, Windows NT, Windows Server 2003 and Windows XP a few years back and then switch to Mac OS X and Linux. Now, I'm hard to get used to this kind of problem again, (sigh) Windows.In any case, one of my colleagues just came and gave me an easy solution. He said that the problem is that your user 'administrator' is not ' administrator enough "-go figure. In fact, being in the Administrators group is not the same as being THE administrator account.1. create a shortcut to 'cmd.exe' on your desktop.2. click right on the shortcut and select "run as Administrator".3. in the command window that opens, "net start MSSQLSERVER" worksGood. So now I can go on this restart-SQL-Server-when-it-decides-to-die script for our customer site. Another sad story of Microsoft... -
Error of the screen - 3 b (mini dump downloaded) Blue system service exception
Hello
I got errors permanent blue screen from windows last updated (20 August)
I finally make me updated manually, it was OK, since new errors appeared (9 September)I now get an exception blue screen system service / per day
it restarts and then it's ok (for a day)BTW, I checked memory with windos tools: seems OK
My minidump file: https://skydrive.live.com/redir?resid=A8AD6CD1267B7D57! 180
I need your help!
Thanks in advance!Most recent minidump files showed similar mistakes as before and more indicate a hardware problem.
Past errors, such as BAD_POOL_HEADER (19) and (4th) PFN_LIST_CORRUPT tend to point to the RAM.
What I would say is to delete everything except a 1 GB RAM module and see if improves stability.
Later, you could reinstall the RAM, a module in time, see if stability is maintained after each module.
-
System operating error at startup of the service OracleMTSRecoveryService
I am facing the following problem when installing Oracle 11 g Release2 database at Microsoft Window 32 - bidt
System operating error at startup of the service OracleMTSRecoveryService
Note: Once I have already ionstalled this database on the same machine and after that I the deleted of my D drive manually by the judgment that these services. Now, after some data, I'm againg installation but it has this error.
Please help me how to solve this problem.
Thanks in advance.
Yassen"OS error" is not so convincing, check the log events for the purpose. Perhaps you don't need this service, if you are not using MTS:
/*
ORACLEMTSRecoveryService allows Oracle databases to use as resource managers in Microsoft Transaction Server.
*/So the quick and dirty solution disable the service.
Werner
-
Original title:
Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.
Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?
Hello
You did changes to the computer, before the show?
Solution A:
For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.
Method 1:
Check out the following link.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 how to back up and restore the registry in Windows
Method 2:
Connect the external hard drive on another USB port and check.
Solution B:
For the problem with the help and Support, check if the service is enabled.
a. click Start, click run. In the Open box, type services.msc and press ENTER.
b. right-click on the service called Help and Support , and then select Properties.
c. under the general tab, set the type Startup to Automatic and click Start.
d. close the services window and check for the issue.
-
I want to install the Windows Live Id sign in assistant.
But when its almost done I get this message:
"Windows Live ID Sign in Assistant (wlidsvc) service could not be started. Make sure you have sufficient privileges to start system services. "and the RETRY and CANCEL buttons.
Can someone please tell me what to do.
I appriciate it :)
Hello
For more specialist help on issue of Windows Live Sign-in Assistant, you can post your request here:
Windows Live Forum - http://windowslivehelp.com/
Maybe you are looking for
-
Work on App and travel to different time zone
What happened to my circle of training and records when traveling to a different time zone? Will be my streak get screwed up by the different time zone? Thank you J
-
How to remove a file whose name name is too long.
Hi, a simple q for someone. I deleted a bunch of files and a rest. How can I delete a file whose name is too long? I can't delete it, even with some administrator privs. I tried to do in a powershell window, but does not use the correct flags. Repeat
-
NOR-USB 9229: How audio signal acquisition?
Hello It's one of those stupid beginner questions I use a module OR 9229 USB to capture the audio output of my computer line as follows: -left line-out goes to AI0 +. -right line output goes to AI1 +. -land line out of is divided into two and goes to
-
Aspire 392 S7 touch screen does not work
I recently bought a new Aspire S7 392 74508G25tws, everything works great except for the touch screen. I formatted my laptop already but that did not help anything. Tried to reinstall the HID drivers (not sure if it matters), but which has not given
-
Unable to access Windows Live Desktop
original title: WINDOWS LIVE WHY CAN'T WINDOWS LIVE DESKTOP OR WINDOW THAT SHOWS ALL YOUR FRIENDS. I HAD BEFORE MY COMPUTER CRASHING, BUT NOW I CAN'T. I APPRECIATE ANYTHING YOU CAN DO TO HELP ME. E-mail address is removed from the privacy *.