System will not sleep.

Similar Questions

• windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

  system will not start, I have not connection wired, software was on the laptop at the time of purchase.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Black vista Windows 2009! system will not stay running...

  my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

  Black of Vista is NOT supported by Microsoft.

  Go to where you downloaded from / got fix for support.

  Mick Murphy - Microsoft partner

• My system will not download upgrades and assistant says update error 0x8024402c

  * Original title: win 7 64-bit ultimate on asus kgpe map server dual socket

  my system will not download upgrades and assistant says update error 0x8024402c (2016-03-29-T-10_53_07a)... whats up?

  Turns out that my computer has a virus, of which a part had apparently obtained in the area of the 100 MB of my raid0 array system.  When I reloaded the os I've removed then reinstalled the partitions, then reloaded the software and my problem calmed.  Thanks for your ideas.

• Maintenance of Windows 8 and will not sleep

  My lenove h505s which is 3 months old has installed windows 8.  Everything has been fine up until about 2 weeks ago it started doing maintenance and this interview will not end.  This seems to be produced at the same time that the computer will not sleep.

  The screen turns off after 10 minutes, but the computer does not turn off and should be 25 minutes.

  I'm sure that the maintenance is now awake and even if you stop the interview, I don't know that because an interview is necessary, stop the sleep of PC.

  I'm afraid this is going to damage that the fan runs all the time when not in service.

  Any advice would be appreciated

  Thank you

  try to optimize the drive options not to defragment the hidden recovery disks (just uncheck the readers which has no drive letter)

  step 1: computer goto-> right click on drive c :-> click Properties

  Tools 2 step tab and in there click on optimize

  step 3 change the settings

  step 4: uncheck the readers who have no drive letter. (most laptops have these drives hidden for recovery and they are not visible in 'computer')

  Much appreciated for these tips!  This was exactly my problem!  Once I configured defrag in c: only automatic maintenance was back he is quick, quick auto...

• resettinng email and password, when the adobe system will not accept?

  Cannot reset my username and password Adobe system will not accept?

  Hello

  Please see account Adobe ID and login troubleshooting

  Hope that helps!

  Kind regards

  Sheena

• I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

  I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• System will not go into sleep mode or Hibernate mode

  I have my laptop set to this mode on battery power:

  Turn off monitor: after 5 minutes
  Turn off hard disks: after 10 minutes
  Standby: after 15 minutes
  Hibernate: after 30 minutes

  However, I don't know if the system goes to sleep, if the hard disks are turned off or hibernate if she is asleep. This sequence will actually happen? Or should I only select one of them (according to the monitor) and let others like ever (except for the screen)?

  Original title: I'm confused on feeding management

  Hi Dhinged,

  You can try the following steps and check.

  Method 1: Run the next Fixit and see if the problem persists.

  The problems of power consumption and extend laptop battery life

  You can also check the following items and check:

  How to solve the problems of hibernation and standby in Windows XP

  Unable to use power management features

  Method 2:

  We will try to restore the default power mode and check. To do this, follow these steps.

  a. click Start, click run, type cmdand then click OK.

  b. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Also check out the following link:

  Power Options overview

• ProBook 450 G0: 10 Windows will not sleep or Hibernate or start properly

  Hello!

  Hello!

  Recently I did a clean install of windows 10 and I have a problem I forgot my past experience with this version of windows: my system is unable to go to sleep (or he can't wake mode 'sleep') or Hibernate.

  Example of situation: I put the system to sleep, it shuts down (the power button blinks always - it's what he does when the laptop is in sleep mode) and when I press the power button (or click on my mouse) system does not. Either he starts as a fresh start (as no "sleep mode" has never been there) or the screen goes black, stay like that for a while and then stops (and, of course, when I open it again it is like a new beginning).
  I never met such a problem on all other versions of windows. I did almost (if not all) of the suggestions and tutorials on the internet about it. The BIOS is up to date, so is my driver chipset with the rest of my drivers. Is it possible to fix this? It's the only thing that will make me return to windows 7.

  HP ProBook 450 G0 with:

  Intel Core i7-3632QM

  Graphics Intel HD 4000 / AMD Radeon HD 8600 / 8700M

  8 GB RAM

  SSD 240 GB KINGSTON SV300

  PS: I found this link where I discovered that the decommissioning of the bios to an older version would work, but I can't find versions older for my laptop.

  I have not upgraded to Windows 7 to 10. I did a clean install and I manually installed the drivers for the AMD and Intel video hardware.

  I found how to solve this problem by making this upgrade of repair: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-perform-a-repair-upgrade-using-the-windows/35160fbe-9352-4e70-9887-f40096ec3085
  Someone who has the same problem, I had perhaps try this method, as any other internet method did not work for me.

  Thanks anyway for your answer!

• the system will not stop after the new update

  System was updated with the new updated 05/24 and now will not shut without using the power button / stop what happened, how this can be corrected?

  FWIW, software Wacom has started to cause a problem with OSX 10.11.5. If you have installed you need to uninstall or check and see if the latest drivers Wacom released a few days ago helps. If you have any Wacom software, there are some others mentioned in the CSA programs that cause the same symptom. I don't remember which off the top of my head.

• I can't install Silverlight with my firefox browser. I get an error message indicating that my system will not support 64-bit silverlight.

  I have a 64 bit system running Vista home premium 6.0.6002 and Firefox 5.0.1. I can't load SIlverlight for netflix streaming?

  Hello zuzann, first of all please urgently update firefox and all of your existing plugins: there are dozens of highly critical vulnerabilities fixed since version 5 of firefox!

  Update to the latest version of Firefox

  https://www.Mozilla.org/pluginCheck/

  & what about silverlight: you must install the 32-bit version, because firefox is also a 32-bit application for now and will not work with plugins that are 64-bit.

• Satellite U400 won't turn on & when we will not sleep mode

  I have a Satellite U400 and is a year and a few months.

  In the last few it was in place, and it started when the computer goes to sleep and goes to the black white screen, it will not fall.
  The only way to do anything is held in the power up to what it turns off and then back on. This brings me to the warning screen that I turned off my computer incorrectly. It was actions also for a few weeks and randomly started unexpectedly.

  Then just today it does at all, I was pressing the power button and the key itself would be lit up and on the right side of the small lights would light up but don't turn on, I kept pressing it again and again and again and finally it turn on. Once on, I used only for a few minutes before turning off again and then do the same thing, I kept pressing the bottom until it works. Its been on now and has not extinguished again.

  There not in the newspaper I had to reformat my computer because I forget my password and had put me out of the computer. About a week after that is when the problems started. I'm not all that clever computer, to be honest, I do not understand something of things, I can follow step by step to do something.

  I really want to pay to have it fix I just want myself and as soon as its in great shape and never had any problems before.

  Does anyone have any idea what this might be, or why it might be?

  I think about reformatting again because I'm worried that didn't work right the 1st time or something.

  Or if it's something that needs fixing someone have any idea on the cost of it?

  Thanks ^_^

  Hi aev270,
  sounds like a serious problem for me.
  Try the following: take out the battery, cd-rom, hard disk, and then try again.
  If it starts without this items - you lucky!
  This means that it is probably a software problem (but I think not - sorry)
  you see the toshiba logo / messages from the bios? No - the you're in trouble.
  This strange behavior may depend on many things: defektive components such as ram, grafics... nor (badest) motherboard...
  If you have still warranty on this subject, you should go to a having servicepartner check installation.

• KB978637 systems will not install.

  Update for Windows 7 for x 64-based systems KB978637 will not be installed.  Error code 80070057.  Have tried and failed to set up since 30 March

  80070057 - ERROR_INVALID_PARAMENTER.  Third party service that is running in the computer creates the problem.  Please do a clean boot, and then install the updates.

  http://support.Microsoft.com/kb/947821

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  TaurArian [MVP] 2005-2010 - Update Services