need help to understand the compatibility with video cards
I recently bought a HP Pavilion a6742p Desktop PC I have no idea what graphics cards, it supports (trying to upgrade). Check the manufacturers page, but I couldn't understand anything either here is the link
http://h10025.www1.HP.com/ewfrf/wc/product?LC=en&DLC=en&CC=HK&lang=en&product=3875703
insaneaim wrote:
THX but which manufacturers video card companies take in charge of hp?
HERE, none of them. I recommend the following manufacturers, XFX, BFG, EVGA, Sapphire & PNY, in that order. These recommendations are based on personal knowledge, as well as several years of hanging around in the forums of enthusiasts.
Tags: HP Desktops
Similar Questions
-
Need help to solve the problem with the margin at the bottom of the converted pdf file.
Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?
Hi jerrio1949,
There is no way to change the margin, you settle back into your original file & then convert to PDF format.
Kind regards
Nicos -
Need help to understand the network of vSphere environment
Hello
I need your help in understanding the network environment in vSphere. Please see the diagram and the text below:
NIC #1 - Management Port (access from client vsphere, vCenter server)
NIC #2 - Port of VMkernal (for iSCSI, vMotion, etc.)
NIC #3 -?
#4 – CARTE NETWORK INTERFACE?
Q1 how allow external users to access services over the ESX host? (for example, IIS, FTP, Exchange, NFS)
Q2, what will be the role of the other two network cards? Is it connected to the physical switch?
* Ask you all to please help me by sharing your knowledge / experience on the network portion, you have made in your environment as NIC how, what to do with that. *
I really need to understand the networking of concepts in vSphere, hope that your help!
Best regards: Yash
With an additional NIC with 2 port a general configuration might look like this:
vSwitch0 - vmnic0, vmnic1 (connected to different physical switches)
Network VMkernel management
VMotion VMkernel network (own IP network, own VLAN)
Better if they is configured as active / standby.
vSwitch1 - vmnic2, vmnic3 (connected to different physical switches)
Trade VM
vSwitch2 - vmnic4, vmnic5 (connected to different physical switches)
VMkernel iSCSI (own IP network, own VLAN)
Ideal if it is added to the component Multipath iSCSI, which is quite easy to vSphere 5.
-
Need help to understand the query result
Hi gurus
I was reading one of the question here in this forum and its link is below:
I had some confusion related to this code and don't understand the logic of the out put, see query below:
Query
with sub_services as
(
Select su_seq 12323, 'HLR1' so_id, 1 seq Union double all the
Select su_seq 12323, "HLR2' so_id, seq 2 Union double all the
Select su_seq 12323, "A09" so_id, seq 3 of all the double union
Select su_seq 12333, "MO1" so_id, seq 4 Union double all the
Select su_seq 12333, "MO2' so_id, seq 5 Union double all the
Select su_seq 12333, "A09" so_id, 6 seq in union double all the
Select su_seq 12333, 'M0CR' so_id, seq 7 Union double all the
Select su_seq 12999, "LOL1' so_id, seq 8 Union double all the
Select su_seq 12999, "LOL2' so_id, seq 9 double
)
Select *.
of sub_services b
where exists (select 1 from sub_services
where su_seq = b.su_seq
and so_id = 'A09.
)
order by 2;
The query result
12323 A09 3
12333 6 A09
12323 HLR1 1
12323 HLR2 2
12333 M0CR 7
12333 4 MO1
12333 5 MO2
According to my understanding, the above query should return records in red only because of her is below command
It exists (select 1 from sub_services
where su_seq = b.su_seq
and so_id = 'A09.
but don't know why he's back 7 files, can someone help me understand the result...
It is query is functionally identical to the PL/SQL block, but much more effective.
declare
number of l_res;
Start
for line (select *)
sub_services) loop
Start
Select 1 from l_res
of sub_services
where su_seq = row.su_seq and
so_id = "A09" and
rownum = 1;
Essentially every row in the outer query are tested against him exists query. Given the correlation between two requests is based only on su_seq each line with a su_seq value returned by him is returned in the output.
Another way to think he uses instead a join condition. This query is equivalent to the query to exist
Select the main
of main sub_services
Join select (separate su_seq
of sub_services
where so_id = "A09") cond
We main.su_seq = cond.su_seq;
John
-
Compatibility with video cards CC 2015
PNY XLR8 GeForce® GTX 980 with 4 GB of GDDR5 memory for compatibility with CC 2015 what? I don't see it in the list of video cards.
Any card with a device compatible-current of the vendor driver should work just fine
Are you talking about a specific program, such as Premiere Pro?
-
Need help to understand political static with Nat No.
Hi all
I have a Pix 515e with 6 interfaces. 5 interfaces are considered as internal that we don't want any translation NAT occur between them. We want only NAT between the 5 and the external interface.
I created a No_Nat ACL successfully to not manage any portion of nat.
What I have trouble understanding is the static command to allow traffic between higher levels to lower levels and vice versa.
I understand the
public static inside_address outside_address (indoor, outdoor)
for the part of NAT translation.
What I do not understand, this is when the inside address and address outside are the same, what order are going. For example, my inner interface (192.168.1.0/24) (sec100) is where the live servers, and I have another interface named accounting (192.168.2.0/24) (sec75).
If I don't want no nat occurs between these two, I have the following
No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit
No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit
NAT (inside) 0-list of access No_Nat
NAT (accounting) 0-list of access No_Nat
Now how can I enter the static command?
Maybe
static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
or
static (inside, accounting) 192.168.2.0 192.168.2.0 netmask 255.255.255.0
or
static (accounting, inside) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
or
static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0
I do not understand the prescription for it and why it would be used one verses the other way. Is the security level determines the order? Do I need two static command, one for each direction?
Thank you
Denny
Hello denny
static can be defined in any way... its only traffic that determines what it... for example, if accounting dmz is access to any server on your inside interface, you normally want the accounting servers see the original on its public IP server inside... so, you will end up as static
static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
only the above static command is sufficient to establish connectivity between inside and dmz accounting. u don't need 2 static on any sense...
Similarly, if you want to inside users to access a server on the dmz accounting, you can write a static type
static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0
hope you understand. Let us know if you need help... but normally a statement nat 0 is more than enough for the inside / dmz communication
Kind regards
REDA
-
Need help to understand the security sandbox problem after changing Web host
I am trying to switch my Web host 1 & 1 shared hosting to an IP address with a small company that specializes in Drupal sites and doesn't know much about flash dedicated.
1 & 1 is always the Registrar for my domain, but I 'tidied up' YourGods.com on holistic servers and "stressed" my site DomainNameServers holistic rather than servers 1 & 1.
After doing this, my Flash site (which is based on the Gaia framework) has stopped working, and the Flashplayer debugger, gave me the following errors:
Error: Cannot load the xmlsocket://127.0.0.1:5800 policy file
Error: Request for resource at the xmlsocket://127.0.0.1:5800 by the http://www.yourgods.com/bin/main.swf applicant failed because the server is not reachable.
Security Sandbox Violation
Connection to 127.0.0.1:5800 broken - not allowed to http://www.yourgods.com/bin/main.swf
Someone to help me on another thread thought 127.0.0.1:5800 could mean that the problem had to do with my ways and I tried to access something on my local computer, rather than being a matter of cross-domain standard where one server was attempting to access files on another server without report.
If anyone can clarify this?
I googled 127.0.0.1:5800 and found some stuff on the loops between a server and the original computer, but I don't really know how to put it all together.
Is it possible (with the flash debugger or other software) to step through my code actionscript with periodic break points so I can understand which line is causing the problem?
Or a way to find out if there is a problem between holistic and my local or holistic computer and the 1 & 1 servers?
Thanks for any help.
127.0.0.1 is your local development server. It seems that your application is trying to access this IP address and unable to. You need to look at the source and find where it accesses to this and replace it with the IP address.
-
Need help to understand the collection
Hi all
I'm trying to understand the concept of collection, but when I look in the documentation that exists in google.ca, then, it seems very confusing. If someone suggest me or send me some simple examples and good collection and I really appreciate it. Thanks in advance.
Concerning
Line
Thanks for the explanation, could you please explain what does really to take care of the index as a whole and clause varchar2 and if yes then what condition we use varchar2 index and in which condition we use index as a whole, be we just use index by integer in our daily practice. Really appreciate your response. Thank you
Generally if you use collections, especially PL/SQL-only collections, your architecture is probably wrong. Collections are rarely necessary, but are often USED in the mistaken belief that they will help performance.
The use of the collections usually DEGRADES performance, sometimes severely, and they are often used in a way that is not scalable. You should avoid using collections if possible.
So don't use the collections AT ALL in your 'common practice '.
For the rare cases where there is to use an array associative index type to use depends on the data type of the element that you will use for the index. If you plan to use a string, then you use INDEX OF VARCHAR2. If you plan to use an integer, then you use INDEX BY PLS_INTEGER.
What type of index to use has NOTHING to do with performance.
One of the WORST mistakes developers make is to use an associative array as target of a BULK COLLECT INTO instead of using a TABLE IMBRIQUEE. Collection in bulk is more often used in a FORALL statement so that the elements are accessible only in the order. Useds "indexed" access with associative arrays isn't even necessary or used.
-
need help to install the printer with cd rom
Hello, I need help to install a 3310 pphotosmart printer all in one. I don't have the cd ROM any help will be greatly appreicated.
Thank you
Hello
You can download the installer for your printer using the link below.
http://h10025.www1.HP.com/ewfrf/wc/product?product=439491&LC=en&cc=us&DLC=en&task=&lang=en&cc=us
Choose "Software and Driver Downloads", select your operating system, open "driver-product Installation Software" and then choose the option download Installer "Full Feature".
Kind regards
DP - K
-
Compatibility with video cards
Hello
I am trying to add a new MSI video card to my Envy H8-1414 office. It's the map:
http://us.msi.com/product/VGA/N660_Gaming_2GD5OC.html#overview
When I add the map with the OEM PSU, I get 6 long beeps. I added a block of POWER W 550 and the beeps go, but I have no video. I contacted MSI and they say that power is sufficient, but I need to check with HP to ensure that the BIOS can support the map. I checked the HP support site and I see no BIOS updates for this machine.
The card is PCI Express x 16 3.0 and 2.0 just says HP motherboard so I wonder if it is simply not compatible.
Any ideas?
Thank you.
Temoporarily remove the new video card. Connect your display to the video embedded right on the port at the back of the PC.
Enter the BIOS and go to the Security tab click on secure boot configuration.
The next screen will resemble the following image. Press the F10 key to commit the change
Verify that secure boot is set to disable. Press the F10 key. Exit the BIOS. Shut down the PC and install the new video card. Plug the connector of display on the appropriate video output port. Turn on your PC
-
HP Pavilion Elite e9120y desktop PC and compatibility with video cards
Hello
I hope someone can help me: I tried to find the answer to this question, but can't seem to nail a definitive answer.
I need to update my video card as soon as possible and I need to know if the mother of desktop PC HP Pavilion Elite e9120y (plug herehttp://support.hp.com/us-en/document/c0174290) supports a Sapphire 1 GB Radeon HD 5670 video card
I know I have to upgrade my power supply at least 400W
I'd appreciate any help
Thank you
This widget could not be displayed. -
Qosmio G10 - compatibility with video cards with VISTA BUSINESS
THE VIDEO CARD IS NOT COMPATIBLE UND UPDATE THE MICROSFT HOME PAGE IS ALSO NOT OK
PLEASE SEND ME AN UPDATE FOR TH QOSMIO G10 GRAFIKHello Michael
Qosmio G10 Vista capable laptop is? There the Vista capable label?
http://support.toshiba-tro.de/KB0/TSB7101O80001R01.htm
-
Need help to solve the problem with worm:win:32 / cridex.e
Please help me to solve this problem worm:win:32 / cridex.e
Hello
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
need help to understand the ACLs and security levels
I use static NAT (nat (inside, outside) static interface) between a single host inside for the DHCP address used on the external interface. The inside interface has the security level of 100, and the outside has the security level of 0. My understanding is that for connections with State, I wouldn't need the ACL. However, nothing works unless I set up an ACL (for example, right now I have a global allow rule). What Miss me?
Even if you 'dormant', but you still have the access list applied on the interface which, by default, will have the "deny ip any any" implicitly at the end of the access eventhough list you have existing line "inactive".
To remove access from the inside of the interface completely list, you must remove the following line:
inside_access_out access to the interface inside group
-
Need help to remove the flicker of video DSLR
Im working in Adobe Premiere Pro CS5 with a DSLR chronology.
IM using an EOS 7 d, Nikon D7000 and a T2i.
The video was recorded in an Executive Office and got his two desktop as background monitors.
Images of canon has a problem, monitors have an effect of bands/glitter on them and it's quite distracting
I tried to use the effect of standard anti-flicker (under the effects of movement) does not.
Does anyone know how I can remove this banding, it is absolutely crucial to the video together and I would be willing to resort to a third party
plugin.
Thanks in advance for any help you can provide.
If you can find a framework of shooting that no poster not twinkle or bands (and assuming that the screen is still, do not change), you could export a still image of this frame, bring him in the draft, place it over the original photo in the sequence and then use a matte effect to only display the (cache item 4 or 8 points would work). Again, this is assuming that it's just a static screen, and that the blow is locked down, and that nothing dims the screen in the original shot, for example a mobile arm. If you have to deal with this scenario, it would be a job for After Effects.
Maybe you are looking for
-
My computer is Windows 7-64 bit.I recently installed the Moon pale x 64 on the right site.Everything works fine, except that the "icon" of the particles in the taskbar and start menu is not the blue moon. I wonder why this is and how I can change it.
-
Can I use an external microphone on T410
I have a T410 (2516CTO) with a "jack audio combo" on the right side. It works well as a listener but doesn't work when I plug in a microphone. Someone said that I can choose the function of decision-making from the drop-down list in the control panel
-
Close the vi appellant NOR switch resets the relay/switch in a known state, or they keep their State existing? The UUT is connected to our card PXI-2568 31 SPST shouldn't have some of these switches changed while it is turned on. If the switch cards
-
I own a bravia xbr-55hx929 and like to watch movies from my USB Flash drive, I tried to convert a MP4 to MPEG-1, but do not then I format my exFat flash drive and copy the MP4 on USB and instlled on my bravia xbr 55hx929 USB Port and it works very we
-
Activation of WINDOWS VISTA oem with another oem drive? HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer d