T400s display flashes when the power cord disconnected - how to fix?

Similar Questions

• HP Pavillion DV5020 that blanks out when the power cord is not plugged in.

  I have a HP Pavillion DV5020 that white outside when the power cord is not plugged in.  Then, when it is in it's very well and when he's not even starts not with the screen committed.  It is NOT the function sreensaver.  Can I plug an external monitor and see what happens, but the maternal lines white leaves display off whenever it is on battery power.

  Anyone seen this before?

  g

  I would recommend to go ahead and reset the computer of hard edge. This is one of the best steps for these types of troubleshooting questions. Here is a link that will guide you through the steps on how to perform a hard reset: http://goo.gl/6mk6K

  I would like to know how it works and post back with all new details.

  Thank you!
  Sean

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite M105-S3074 - blue light flashes when the power supply cord plugged

  I have a Satellite M105-S3074 that when I plug in the power cord the blue left flashes just light and unit will not feed. When I unplug it from the laptop all lights go out and it is will not help here please

  Thank you

  Hello

  This means that your mobile doesn t boot with AC/DC adapter and AC/DC adapter too?
  Really strange what s

  Have you tried to remove the battery and the AC adapter? If you remove the two you should an hour and then reconnect the two. Maybe it will work.

  If this isn't the case, it seems to be a hardware problem. You must contact an authorized service provider, you can give them a call to speak to a technician.

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.

• Laptop stops when the power cord is not plugged in but the battery is charged to 100%.

  just happened this morning.  accidentally deleted the decision-making of the laptop.  and the judgment of the laptop.  weird because this has happened before and no problem.

  However, this phone wouldn't turn.  until I have plug AC laptop would be the power of the laptop on.  I checked the battery is the meter displays 100% charged.  in windows, it is 100% loaded.  but as soon as I unplug the laptop, the computer shuts down.

  I have windows 7 and my computer is HP dv6t Quad Ed.  any help would be much appreicated.

  Plug the power adapter. Connect to Windows and open the HP Support Assistant perform the battery test. Post your results here.

  If you have the most recent UEFI (v 5.1 or higher) environment installed-> press-> power button press the ESC key to call the menu of boot - select F2 the System Diagnostics-> PC HP Diagnostics UEFI material-> select components-> battery Test tests.

  

  Post your results here in your thread.

  Best regards

  ERICO

• Reference Dell 2400 will start when the power cord connected to the mains, or after restoring power. Is the result of a setting on the computer?

  The computer is turned off.  If the electricity is off, the computer will automatically start once power is restored.

  I guess it's a desktop pc that is a few years old and yes some early atx power supplies will do it, creepy when there was an interruption of the power supply when you are out and go home to find the pc on.

• LED backlight display off when the power supply is connected

  Basically, what happens is every time others or so when I plug my T420 in power, the backlight of the screen turns off completely. The screen is always on because if I look close enough I can still see whats on the screen. All the other power lights, Thinklight and other indicators remain on. I can't tell if this is a problem of motherboard, power supply problem or something different, but the problem is very frustrating because I put the computer to sleep and then wake it up back up to continue to use the machine. Any help is appreciated.

  Using the search I found this:

  Link to the Knowledge Base

  This problem is well known and seems to be a hardware error. Then try to contact the after-sales service and send in your thinkpad. Or you can use the workaround described in the link above.

  Moderator edit: link fixed.

• Yoga 11s stops immediately when the power cord is unplugged.

  It indicates that the battery is fully charged, but when I unplug it comes completely dies. I just got this laptop referbished. What is going on?

  @alexc995,.

  Interesting shots... maybe its another component fail. Send it to the service and let them make the diagnosis. On our side, it is the maximum we can do because the battery is non-removable.

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Presario CQ20-320TU: my notebook (presario CQ20) directly turn on when I plug in the power cord without battery

  My laptop (presario CQ20-320TU) turn directly every time I plug the power cord without battery. What is the solution?

  Hi there @emonsonjaya,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that your notebook is turn on/off automatically when it is plugged. I'm happy to help you.

  I would recommend that you look at your BIOS, especially in power options and check if your BIOS has a setting option on automatically. If yes it change at your convenience.  Another option would be to update your BIOS and see if that solves it.

  Here is the page of support for your model and, if necessary, give it a try, it will automatically download the file if you click on the link. You then need to run the executable file of your current download folder.

  HPQFlash for HP Notebook System BIOS (68PHU) - Microsoft Windows-Based

  If you are having problems with an update of the BIOS, you can always restore it, using the following:

  HP Notebook PC - restore BIOS

  I hope this helps.

• After resetting the iPad to default it show that the power cord is trying to connect to iTunes

  I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

  The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

  If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management