Computer automatically "wake up" and unable to wake up mode standby when left idle

Similar Questions

• T500 wakes up automatically mode standby when on feeding

  Just got a new T500 and installed Windows Vista Business x 64 and all updates from Lenovo and MS. everything works fine except one small thing:

  When I put the computer in standby mode och put into hibernation, he stayed there for a few minutes and then he wakes up automatically again. Then back to mode standby/Hibernation again. Then he continues in a loop this way.

  I noticed this happends only on the current.

  Nothing about it in the Windows event log. I've changed almost every setting in the BIOS but without success...

  Any idea?

  Found the answer here:
  http://communities.VMware.com/thread/197962

  It was 'VMWare vCenter Converter standalone 4"that was causing the problem. I uninstalled it and wake up without supervision problem has disappeared.

• Computer automatically shuts down and restarts after 5 minutes run time

  Two days ago, restarted my computer, which worked very well for a few hours, (& a few years) suddenly automatically.   He then ran fine for about 4 hours when it restarts again.   He has now made that ~ 20 times, some time to restart after 5 minutes.   It also does if I connect on behalf of my wife, or if I boot in safe mode and log on as an administrator.   As much as I know I have no virus problem, but I can't be sure that it didn't stay on long enuf to run my antivirus program to the end.   Malwarebytes and Superantispyware both showed no problems two days ago, but now they also will not work I tried to backdate the system (System Restore) to last week, but failed, perhaps because I removed an old Norton SystemWorks program two days ago, when I got hurt, because I thought that maybe that's the problem.

  Is it a hardware problem or software?

  Now, I am trying get useful data on the device by frustrating bursts of 5 minutes.   Windows XP, service pack 3 with automatic updates.

  Thanks for any help.

  As a follow-up, I now declare that apparently the drive was packing with something irreplaceable on it grilled, so I'm ready for a new machine.

• I was on the internet and my computer automatically turns off and now when I press start for most all my programs do not appear and saying all the folders are empty

  Windows Update no longer works and my computer is extremely slow so

  Hello

  1. have you made changes on the computer recently?

  There is a possibility that another application is at the origin of the conflict with Internet Explorer. Let us check in safe mode with network and then we can check in clean boot to find the root cause of the problem.
  Step A.
  Please check if you are facing the same question when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vista with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.
  For more information, refer to the article below.
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  Step B.
  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

• Why my computer won't start, and where to go safe mode?

  I had nothing but problems since then tried to switch to Windows7.  Several attempts over the past two weeks, none worked. Then started getting the blue screen of death at random times. Today they came more often until it got the point where computer should restart and go straight to the blue screen of death.
  Tried to reinstall Vista, I have had to do in safe mode, because I couldn't have what. Did not exist then. Now, I can't find it. Don't ask me why. If I knew, I wouldn't be here.
  Vista has been subject to half way through installation when SURPRISE! Blue screen of death. After that, he says that there is no disc in the drive, then no player, then not whatever. I remember even now, I'm so frustrated. Changed the CMOS to boot from the CD Rom settings, did not a thing. Can't find safe mode more. Never heard of that one before.
  What he does now is during startup, it happens at "Verifying DMI Pool Data data... ", and then says"disc error occurred, press Ctrl-Alt-Del to restart. " So now, it's in this endless loop.
  So, is he dead? I'm afraid to change other parameters, because it's a white box. He got 2 readers of DVD, which now seem unnecessary. It is also a RAID configuration, and I never dealt with more than 1 hard drive before. At one point, I got to a screen (no idea how) that allow me to achieve a memory check. If I remember correctly, he said that memory was fine, but there was a hardware problem?
  Any ideas?... Anyone?... Beuller? ... Beuller?

  Thanks for the reply. I finally get it working again. Find an old email of the person who built it, and fixed it without delay. There is nothing wrong with the hard drive, it was fine. In fact, 'they' were very good. The problem is in the bios settings. After I changed it to boot from the CD drive and it did not work, I put in some way something to the default settings. Big mistake with a raid system. He apparently wanted to a single hard drive, and this computer has four. Or is it 5? How long I forgot. The user then, stupid mistake.
  I will, however, never try to reinstall Windows 7 on this computer. If someone wants to give me an old, used computer, I'll try, but I got to risk it.

• My computer out of the mode standby when I unplug a usb device.

  When my computer is in sleep mode and I have to disable my printer or disconnect a usb device, it turns on. Is there a way I can prevent this?

  Hello

  The system responds to those, as if you had moved the mouse. I know no way to change those.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 automatically wakes from sleep mode

  I had problems with Windows 7 64-bit Professional automatically wake sleep mode. If I put the computer to sleep then come back a few hours later, he is still awake. I tried to disable the ability of the network card, mouse and keyboard to wake the computer, but he always wakes up alone. I also ran 'powercfg - devicequery wake_armed' cmd and it does not display a single device. Is it possible for a current program reactivate Windows, and if so, is it possible to understand that one? I want Windows to wake up only when I push the power button.

  You see a bug reported several times by some users. They are all using ACPI and pilots the "chip" requiring an update for Win 7 to successfully use the sleep function.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Computer constantly wakes from Sleep Mode

  I have a new PC HP Pavilion Elite M9450f waking up constantly from Sleep Mode, even if no one is at the computer or even in the bathroom.

  Sometimes it will stay mode standby for a few seconds and other times, it can stay in this mode for 10-15 minutes, but he still wakes up mode standby by itself.

  I would appreciate any advice you can give me for this problem.

  More than likely, this is your internet connection, it to wake up.  I hope that someone will jump in and explain better than me how to turn off the wake of the lan setting.

• Satellite A100-049: CDs and DVDs do not read after standby

  I have a new satellite A100-049 delivered with vista home premium pre-installed. After returning to the computer from sleep/wake (whatever mode is when the yellow light pulses) without discs can be read in the drive. The disc rotates constantly, but nothing will happen.

  Everything works well when the computer is turned on at the first time, but after the sleep he stopped playing discs. Is that what I can do about it?

  Hello

  What happens if you remove the media CD or DVD of the training after the laptop back to sleep/wake?

  I mean that you should remove the Middle, close the CD tray, then open the drive, insert the CD/DVD and check if the laptop recognizes the middle.

• computer randomly goes into mode 'sleep' when typing

  I have a new Acer Aspire 4820 t running windows 7 Home premium. I have a problem with the computer will randomly in mode 'sleep'. This seems to happen especially while I'm via remote desktop, although not entirely. The computer does not heat and I turned off "sleep" mode completely or at least thought I have.

  I can be typing at the moment then actually use the keyboard. Incidentally, this is the second computer, it happens that I sent the first back thinking it was a hardware problem.

  Any help would be appreciated

  Dear Mike,

  Try this by the solution of the box. It worked for me:

  Dear mn2rgorillaz,

  I am a computer repair technician, and suddenly one day I started having the same problem, 12/09/2011 in fact.  I tried everything, reboot the computer, the bios flashing, change all settings to never sleep and none of them worked.  I always had the same problem with my computer go to sleep in the middle of my typing, all random, of course, I could type a paragraph or a letter and PAF suddenly that he would go to sleep.  I was very frustrated, I sat for an hour and has thought of everything that had happened that day to try to understand what it might have been.  I didn't think the worst (bad mother).  It took me a little bit, but it finally hit me.  I bought this pretty new braclet that day, one of those magnetic which is supposed to help with arthritis and carpol tunnel syndrome.

  As a computer tech, I felt really good because as all of us in the field will tell you computers + magnet = cloudy.  I do not think that anything of it when I bought and had already forgotten that I was wearing it.  Bingo, it took off about 10 minutes ago and I was seized as a crazy for woman.  No problem what so ever.  Just thought I'd throw it out there in case you might just wear the said kind of braclet.

  -------------------------------------------------------------------------------------------------

  LARGE Leah, I think you nailed!

  My acer as3810T started with this mysterious behavior also and I have also updated the BIOS, update of office, ran several optimizers system, etc that does not.

  Now that you mentioned the magnets. I hurt my hand and my mother recommended to put a few small magnets the base of my thumb which should have the effect of acupuncture without needles.

  Now I type with one hand (the one with no magnets) and of course the PC never sleeps in the middle of the sentence.

  Great shot! That's what I call thinking out of the box! I'd never get one. Thank you so much for sharing your insight.

  Cheers from the Brazil

  George

• Computer goes to sleep and won't wake up

  A few days ago my computer started not to wake sleep cycle.  It goes into hibernation and don't wake up with a jerk of the mouse or by pressing the buttons on the keyboard.  I put the display to sleep for 4 hours and 30 minutes, but she falls asleep before 4 hours are rising and then don't wake up upward.  I have to press the button for a few seconds to do to turn off and then restart.  If I press a button on the screen when the computer is in standby it gives me a message that the signal of the computer has been lost.  Anyone has any ideas how to solve this problem?

  Hello

  Look at all the features associated with sleep and ensure that it is only sleeping and not hibernate.

  Some computers sleep mode will not let you wake up mouse etc. You have to push short s to the power Witch (as mentioned above by WillTel).

  It is possible that your computer never before slept and was just to go off the screen.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Wake Hibernate mode computer system using Task Scheduler

  I want to wake my computer automatically from hibernate on my schedule.

  How can I set schedule using the windows Task Scheduler?
  I am using windows 7 Ultimate.

  A lot of PC may wake up only from hibernation while they are plugged into current alternative.  Task Scheduler alarm setting can, in these cases, only the reactivation of sleep.

  I got this restriction when I checked the explanations allowing reactivation in my BIOS.  The manual of your PC, the PC manufacturer's Web site & their user forums may also have explanations of this.

  The key to enter the BIOS during the boot can be displayed on the screen, while the PC manufacturer name and can also be included in the manual of the PC.

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps

• Satellite Pro T130 - unable to wake from mode 'sleep'

  I have a Toshiba Satellite Pro T130 running Windows 7 Professional 64 bit.

  After installing the Wireless Update September 29, such Manager recommended by Tempro, I'm problems with an awakening of the mode standby. Most of the time my laptop just don't wake up more and all I can do is to the hard switch off and turn it back on. I tried to solve the problem by changing the configuration options of the advanced sleep mode, and it seemed to work for a while, and problems to restart again.

  Please help me with this issue, it is terribly annoying to have to turn off and turn on again everytime my laptop goes into mode 'sleep', not to mention the fact that I have to take care of not to let something unregistered, to avoid losing data.

  Thanks in advance.

  You have already started a thread on the same topic here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=222143

  Please follow the first thread to prevent certain misunderstandings