T500 WOL

Similar Questions

• 10.11.4, no WOL on Ethernet function

  Hello

  I m on iMac 21.5 "2009 and after a 10.11.4 WOL on Ethernet update does not work. It does on WLAN and as I

  I went back to a 10.11.3 version and it works, I think that there must be the update.

  Unfortunately, I imported and dealt with a large number of photos currently on the new version and the doesn´t library work with 10.11.3.

  Does anyone have a work around for this problem?

  THX,

  Unlight

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• WoL not working not not on NB550D

  Good evening

  hoping someone can help here.

  I have a Toshiba Netbook NB550D, connected to my home network via a LAN cable.
  BIOS is the latest available version (v1.40)
  WoL setting enabled in the BIOS and in Windows NETWORK card driver

  I try in vain to wake the portable computer.
  Strange thing is that sometimes it works (1 in 10 attempts).

  I tried several Android applications as well as my WoL built-in to my billion router function.

  Anything else I should look at?

  Thanks in advance

  CECU

  As you say, the WOL must be enabled in the BIOS.
  You should also check the LAN card properties.

  Device Manager-> LAN card-> properties-> Advanced tab

  There are a few options that must be verified as to allow only a magic packet wake the computer

  By the way: test the WOL using some 3rd party software like WakeMeOnLan v1.66
  http://www.NirSoft.NET/utils/wake_on_lan.html

• After the 10.11.4, update Mac mini wake with WOL

  After the 10.11.4, update Mac mini wake with WOL.

  I have a recovery Partition, but it does not start in Recovery (⌘R)

  How to return to 10.11.3 (or fix the WOL)

  Holding down option at startup gives me the optional recovery partition (I forgot about this!).

  I can now return to 10.11.3

• Satellite A50 - WOL

  The A50 is able to wake up on LAN? I'd do it
  If so, how do I configure it?

  This option is available in the BIOS settings (WOL)?

• Satellite Pro L20 PCMCIA support WOL?

  Support of the L20 Wake-On-Lan via the PCMCIA bus card, if I get a compatible card WOL?

  I'm not 100% sure on this subject, but I do not. I believe that all of the settings in the BIOS are for ports for laptop only and have no influence on the additional hardware such as PCMCIA cards.

• Satellite T500 - how to use HD TV?

  Hello

  I just bought the Satellite T500.
  I was told I could just plug the antenna and it would work, but when I click on HDMI output icon I get the msg "it is only effective when the pc is connected to a TV set that supports HDMI control via the HDMI cable.

  Does this mean that I have to do something else in order to make it work?
  Would be grateful of any advice.

  Thank you

  T500 satellite does not for me
  What cell phone do you have exactly?

  I recommend checking and reading the manual first!
  I think if you pressed the button that displays the screen of the TV that could be connected to the computer via a HDMI TV cable!

  For example, you can watch DVDs on the external TV

• T400/T500: Horizontal USB ports are there?

  Are there only vertical on the T400 and T500 USB ports?

  I think that the current T61 and R61 have ports usb place management, having 3 vertical usb ports are cramped on one side makes life a bit difficult for people with usb accessories oversized.

• Thermal management T500

  I have a T500 with P8400 and integrated graphics. Even if the laptop is almost always cold (and besides I use Thermaltake fanless cooling pad ixsoft) fan is almost always lit (Everest indicates that, even with the kernel time about 30 C). The fan is only triggered when it is rather cold (17th century) in the room (using the profile of energy of maximum battery life).

  This behavior is ok?

  What is the threshold temperature to start the fan?

  How can I change the thermal management? (I tried BIOS and ThinkVantage power management)

  Hello

  Try the small program fancontrol.

  or Tpfancontrol of Troubadix.

  If all goes well, it works on the latest systems of T.

  Concerning

  Andreas

• T500 - how to change discrete ATI graphics card?

  I can't work on how to spend my (ok my wife!) T500 to use the ATI graphics card. Everything I read says do a right click on the battery icon, and then select "maximum performance" or words to that effect. So I did. Then what? It is still using the Intel chipset, even after a reboot. Is there something I'm missing or not to see?

  Thank you

  I installed updates some time ago and the problem has been corrected. Not very impressed it worked not out of the box.

• T500 Will work with 62P 4551 Mini Doc

  We replace a number of T40s with T500s. The Docs of Mini 62P 4551 we use with the T40s will work with the T500s and if so, are there restrictions?

  Thanks - I thought that this might be the case.

• T500 SSD Samsung Evo 840

  Hello

  I've had a T500 laptop for about 4.5 years now and I'm looking to replace my HARD drive. I'm afraid that happens at the end of its service life. I'm looking to replace it with an SSD - especially a Samsung 840 EVO (MZ-7TE250BW). I am aware that I won't speed SATA III (seems to be SATA I or possibly II - even then it will still be an improvement from my HARD drive).

  From what I found, the T500 has a drive Bay 2.5 "9.5 mm. However, the EVO 840 is 2.5 "7.0 mm. So my question is this - can be PLOPPED in the SSD to replace the HARD drive, or is there some necessary adapter kit? The player would need a different box / rails? Obviously 7.0 mm would fit, but I don't know if the screws / connectors were queuing and if something would be needed to fill the extra space to make the drive safer. There are a bunch of EVO 840 which comes with a 'portable' kit but I don't know if it works in my T500.

  Thank you

  Mark

  Welcome to the forum!

  I have installed a number of 7mm SSD using the standard a 9mm HARD drive caddy/rails. Have not yet tested the EVO, but I do not think that you will have problems here.

  Happy update.

• T500 completely scrambled discrete graphics

  My T500 has developed a serious problem with the video of the graphic interface is completely corrupt.

  I tried on the features of dual screen with my L170p monitor. As I used it, I noticed a video corruption, particularly on applications slipped between the views. Finally, I decided that it is not really me anyway, and so I minimized the 2 display resolution (800 x 600) and disabled the option "extend my Windows desktop on this monitor.

  However, corruption has continued and I decided to restart it. However, before I could, the machine gave a BSOD that was mostly unreadable. Reboot, the Windows XP splash screen was also altered; I tried to use the Fn + F7 to switch to the external display, but it was no better. Try to connect fingerprint BSOD machine'ed - this text is unreadable, but I saw the word '' parity '' in there. From this point, it went from bad to worse. Connect the external display and try to get the BIOS with the F1 to the ignition, I could see a text there, but it is mostly illegible and overlapping with lots of video noise and the vertical bars cyan, flashing boxes of all colors, etc..

  Somehow, I managed to do enough to get the BIOS to switch to the built-in graphics card and was able to boot Windows and install the Intel graphics driver, so the machine is little functional again.

  However, go back to "discrete graphics" gives the same problem: no video on the internal LCD screen, only scrambled on the external monitor. If I allow Windows to start with discrete graphics, TI BSOD with an unreadable screen for the most part, but it seems to speak to shut down Windows to avoid damaging the material and the word 'conflict' is here, too.

  Configuration: T500 type 2081-CTO, 4 GB RAM, Windows XP SP 3, fully updated with drivers

  Display of the BIOS settings (all other settings are default):

  Main default video device: internal

  Initializing display: Thinkpad LCD

  : Initially graphics discrete graphics, now integrated Graphics

  OS detection for switchable graphics: disabled

  I wondered if the bi-ecrans mapped configuration somehow ATI video RAM so that it comes into conflict with the top of that 4 GB of RAM. Remove a 2 GB DIMM has not helped. However, once the machine has restarted successfully with Windows, the ATI driver has not been loaded (as the discreet graphics card has been disabled) and so perhaps all that has been mapped has not been not mapped? However, I expect memory graphic mapping be reset to zero at the start anyway. And since the video is so completely that screwed up at startup, it is resembling more a permanent hardware failure, in which case the machine back under warranty.

  Are there any other suggestions on how to proceed?

  Best regards

  -The

  The machine came back last Friday - the technology has replaced the video chip, as well as the keyboard, for some reason any. He had also installed Vista x 64; I tried to learn to love it, I really have, but after a few days, I have decided that the benefits outweigh the problems of compatibility, I got with my (admittedly old) version of Lotus Notes. So I reinstalled XP Pro and everything is now back to normal - although I'm not willing to try the external chart again on this machine.

  Best,

  -The

• T500 and Win 7

  I'm curious to know if/when Lenovo T500 will begin to support ThinkVantage applications on the platform of Win 7?

  I was wondering which application you want to say. 99% of recently published applications are works perfectly with the T500. For me only the scanner digital (I think it's my fault) and function of graphics card switch (catalyst 9.4 modded works almost, just crashes )

  Surprisingly, use native/programs Vista drivers, most of them works. 7 specific updates can be found on: http://www.lenovo.com/windows7beta

• Installing Windows 10 on T500, Windows 7 migration

  During the installation of 10 window, a message appears that the media required driver is missing (DVD, USB or fixed disk). Looking for the driver, I find an ovierview, saying that W10 does not work on T500. Is this correct?

  -Otherwise, where I can download the required drivers?

  -Si W10 does not work on T500, how can I go back to Windows 7? No possibility to continue more away from this error message.

  Thread can be closed, because I finally managed to restart Windows 7. Thanks to all the volunteers, think of a solution for my problem as specified above.

  Just for your information: the text of detailed explanation for my readings of problem window-10:

  0 x 1900101-0x3000D

  The installation was not successful. In the FIRST STARTING phase, an error occurred during the process of MIGRATION-DATA.

  Whatever that means, it does not increase my confidence in W - 10.