T520 and T530 FHD screen quality

Similar Questions

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• IPhone flattened my mother fell and broke her screen and I bought a new Yvonne, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  IPhone flattened my mother fell and broke her screen and I bought her a new iPhone, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  Yvonne > > iphone

  Sorry

• I use google chrome and lately my screen started flashing intermittently then on the internet.  Any suggestions?

  I use google chrome and lately, my screen begins to blink intermittently during the use of the internet. It flashes maybe several times in a minute... I uninstalled chrome and reinstalled... no change. This just started about a month ago.  Suggestions?

  Chrome support

• I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I'm not

  I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?

  Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• Qosmio F60 - stop slower and a blue screen with driver out of State

  Hello
  I've only had the F60 for a few weeks and although it worked well for 2 weeks, 2 days has been a disaster. First AutoCAD crashes during startup and does not at all.
  So, my Outlook 2007 do not meet 1 / 3 times.
  Finally, whenever I stop, this is a very slow stop (10-20 minutes) and then blue screens, restarts and says that it is a driver fault status.

  Help - what someone else had these problems?

  You'll be lucky if someone else uses the same software as you and you can check this.
  My personal opinion is that all of the problems described are certainly software related issues.

  We do not know how you set up your laptop, what modules are preinstalled, software that runs in the background and all other important info is not easy to discuss these issues.

  I'm sure that you do not have these problems on the first day, right?

  I know you hate me now, but maybe you should back up all your important data and install the OS to help original Toshiba recovery image. After having this software to remove all the preinstalled you do not need (additional Toshiba stuff) and continue with the installation of Microsoft Office. Check the functionality and continue to install your favorite step by step software and watch carefully what happens.

  Also disable automatic Windows Update and change this option to check for updates but let me choose... option. So, you will have full control over updates.

• How is - this hard I can reset my iPhone 5 with the broken home button and the touch screen is not responding.

  My iPhone 5, iOS 9.0.2 does not respond to touch. (broken touchscreen) and my home button is broken. my battery is fully charged so that it would take too long to wait until it turns off. I need a way to Hard reset it without a button at home and the touch screen. I know there are 3rd party apps that could do this, but I can't open my phone (no password protection) to 'trust' on this computer. If there are applications that could work around this? Any help is appreciated.

  There is no way to do it. You have 2 hardware problems. Time to replace the phone.

• 2 beeps on startup and the white screen - Satellite P300 - 19 p

  Hi guys,.

  I installed an Express card yesterday and he did all sorts of havoc (IRQ conflicts, hook etc.).

  I went to reboot this morning and he is now just give me 2 beeps and nothing on screen. I watched the phoenix bios beep codes, but it is not listed. Any ideas if I do a reset of the BIOS with a rider?

  Of course I tried to remove the Express card!

  Any help would be fantastic

  Thank you

  Owen

  Hey Buddy,

  BIOS resetting is possible only to an authorized service, but I think that the BIOS is the problem because these beep codes mean that a hardware malfunction has been detected

  What you can do is to remove the battery and the AC adapter for an hour and then reconnect the two. Your laptop boot?

  If not it material s serious malfunction and you must contact a technician from laptop to help.

• My daughter dropped her ipad and now the screen is yellow - help!

  My daughter has recently dropped its ipad and now the screen is yellow - help!

  Screen most likely is damaged or it has hardware problem.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  If it does not help take your device at the Apple Store for further diagnosis. Good luck.

• New Y500 brand guard freezing and goes black screen

  I recently bought the y500 Monday and it was perfect until today where she got a blue screen of death with the ERROR of VIOLATION of CUSTODY of DPC dog or something like that and since then it has been freezing randomly and goes black screens where I turn it off? Any help?

  I fixed it I think it's all good, until here, if anyone has the same problem, I have just restored my pc to a date where he worked well and optimized my drivers. I may not be not similarly had to restore my pc

• My Air iPad screen has locked and now the screen is black can not disable either help

  HHelp my iPad locked up Air, tried to turn it off but nothing happened and now the screen is black, what should I do?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

• Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?

  Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?

  See Re: corrupted iPod classic. If she does not really have a reset set it aside and let the battery completely discharge. It should reset itself when you load again.

  TT2

• Edit event managed by this case in LabVIEW 2013 does not show the specifiers of the event, Event Sources and events on screen resolution 800 x 600

  Edit event managed by this case in LabVIEW 2013 shows not specifiers of the event, Event Sources and events on screen resolution 800 x 600.

  As far as I know, the list of supported resolutions is determined solely by the graphics card. It is possible that one used by the PC supports only 800 x 600 as maximum resolution, even if you plug an external monitor.

  Like Dennis suggested, the recommended option would probably be to develop on another PC and only deploy an executable for the industrial PC. That's what we do with our systems (although not because of this problem, but because it makes sense. There absolutely no need to have the IDE installed in most of our systems).

  Other options:

  1. See if you can get an update of the driver from the manufacturer to solve this problem.
  2. Plug a USB Monitor with its own driver.
  3. Try to hide the taskbar and make the smaller title bar in the hope that the bug manifests.
  4. Try remote access in the PC. I think that some remote access programs allow you to specify custom resolutions that are not affected by the original drivers. Remote Desktop seems to be a likely this option even if it has been awhile since I've used it.
  5. Check the BIOS. I saw at least one industrial PC where there was some settings in the BIOS to control the resolution, but I don't remember the details, and it was quite limited. I think that in this case, you can change the resolution, but then the image does not fill the entire screen.

• Why can I not see my impression and why my screen so brilliant that I can barely see the screen: it is therefore low.

  Why can I not see print and why my screen so brilliant that I can barely see it?

  Use the buttons on your monitor to adjust brightness and contrast settings.