T5400 and XP install

Similar Questions

• Enter your password... Guard asking even after reset and re - install and the curse

  I recently did a clean Win 7 SP1 and re-installed installation many programs. I used REVO uninstall pro to make a withdrawal deep and re-installed Thunderbird 38. I ran the chrome://pippkicontent/resetpassword.xul. I managed to help my pw even years now including my connection information to the web site of Netzero. When I start Thunderbird, I type in the pw was asked and he accepts it for sending a message and when I type in the same pw, it sends a message. When I exit Thunderbird and start it again, he wants to again my pw. I tried to "Normal password" and "Encrypted password" and restart Thunderbird restarted and reinstalled...
  I uninstalled and reinstalled and made sure the security zones are disabled for the pw and master pw economies. I deleted all cookies. Regedit shows a lot of entries in mozilla and thunderbird in remaining after the deep uninstall. I dare not remove regedit entered on mine, again. Any ideas before I divorce Mozilla?

  "Firefox"?

  If you tell him not to store passwords, then he must ask for them whenever you start.

• Under Win 10 Pro, updated to v40.0; "Minimize full screen & Exit" buttons don't work. Re - download and re - install did not set; decommissioning of v39.0.3 fixed?

  Windows Pro 10. Update Firefox to v40.0. At the top, buttons full screen and the exit on the right, minimize it, didn't work and hovering on any of them could not highlight the button. I have re-downloaded the update and re-installed, but the problem still exists. As a test, I tried downgraded to v39.0.3, which fixed the problem. I realize that the downgrade may pose a security risk, but it works, and not v40.0! Prior to decommissioning, I tried the customization option, out, re - click on the menu bar, but neither helped. What to do next?

  BOBHAKES said

  In addition to troubleshooting: I opened v40.0 Firefox in safe mode, and the problem occurred is no longer. Then restarted, open Firefox v40.0, using the option "Refresh", and the problem occurred is no longer. After add desired Plug-Ins and Extensions (eliminating some older or infrequently used items), I restarted Firefox, and the problem no longer occurs. Obviously, the problem was caused by one of the extensions eliminated or plug-ins. No other assistance needed.

• Unable to get Netflix on Firefox 39. says "unknown Player error" already uninstalled and re-installed silverlight

  Unable to get Netflix on Firefox 39. says "unknown Player error" already uninstalled and re-installed silverlight

  Thank you for the presentation of reports. HTTPS Everywhere is a great idea, but many sites that are not designed for HTTPS, it causes these mysterious problems.

• I can not open after installation Add ons, reset and unistall it and re install, but the same proplem

  I work with firefox for a long time without any prplems but suddenely I can't open then reset and then install a few toll bar and the user agent changer Add ons after that install them I can't open at all then reset but useless and then reinstall more time after removing the profile but the proplem even more. knowing I used them (the toolbar and the user agent changer) for a long time more than year with firefox without any proplems.what that's happened?

  Please help me

  You must contact the addon developers to prevent this, Firefox has no responsibility of an addon with a bug.

• Impossible to copy the text to clipboard error - I had tried everything include uninstall firefox and re install. I tried to disable all plugins and addons. I have to c

  Impossible to copy the text to clipboard error - I had tried everything include uninstall firefox and re install. I tried to disable all plugins and addons. I have to click 20 times on text to paste in all websites. What should I do about it? I use FF 22.0 worm, win 8 and the problem just a few weeks. Thank you

  You have zonealarm, if if this is the problem.

• I installed the app Channel Four and I was never able to use it.  I tried to remove and re-install, but to no avail.  Any notice received with gratitude.  Thank you!

  I installed the Channel Four app on my iPad and I was never able to use it.  I tried to remove and re-install, but to no avail.  Any notice received with gratitude.  Thank you!

  Have you downloaded the correct version for iPads.

  https://iTunes.Apple.com/GB/app/4oD/id432494037?Mt=8

  Click on view in iTunes and download it from there.

• Unrecognized works drivers and windows install on and on

  Dear Toshiba

  I need some advice and help on some problems with my laptop Toshiba Satellite L550D windows 7 (updated with windows 7 I have purchesed on your part).

  I searched on several Forums (forum of toshiba responses, Microsoft MSDN Web site), but I still have a few problems, and I do not hesitate to ask for help in this way.

  Question 1: My laptop does not recognize some drivers, and it happens as follows: I check in the Device Manager, device system, ATI i/o communications processor smbus controller, shows message: "no drivers are installed for this device. When I chek 'pilot' message: ' no file necessary drivers or embarked for this device.

  When I tried to update driver, there is automatically a message that this driver is up to date and in 'Browse my computer for driver software' we goes to the location of the driver file, and then select the driver to install, the installation of the driver, then "windows has successfully updated the driver software", has finished installing the driver for the software (see above the IO... ATI).

  After that, I downloaded all the drivers available from the Toshiba site yesterday for my OS and my product and the situation is the same, it shows NO file necessary drivers or have been loaded for this device.

  The same situation is with other equipment, as follows: timer event 2) precision, 3) numeric data processor, controller 4) programmable interrput, 5) speakers, 1 memory access controller) direct, clock system 6).

  Question 2: There is also another problem, that some downloaded drivers can be installed, as follows:

  (a) software modem of toshiba 2.2.97 (SM 2297ALDO4), message: you want to allow this program to make changes... ? I click 'Yes', but nothing happens.

  (b) parts of modem select Driver utility, it appears the message "cannot find the support device.

  (c) Mobility Center tiles pilot and driver DVD player, touch pad driver synaptics, for only three drivers there is no Install Shield Wizard on the screen, and installation does not start.

  (4) Toshiba vallue added package 1.2.25, message shows, 'Try to prepare InstallShield wizard', then 'another version of this product is already installed, installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove programs from the control panel. {FEDD27A0-B306-45EF-BF58-B527406B42C8}.

  I tried to uninstall Toshiba value added package, but it shows that Error 1612 the installation source for this product is not available. Verify that the source exists and that you can access.

  I also noticed that the existing version on my laptop is 1.2.28 (of the 06.01.2010) and this downloaded version (that cannot be installed) is 1.1.1.4.

  Question No. 3: above all that, every time I have start or restart Windows 7, it displays the message 'windows install installation preparation', short-term, then disappears, (I collapsed, then activated and restarted Windows install) and the error is not resolved.

  How to remedy?

  Thank you

  I have after reading your long post m really to wonder: what do you do?
  DERA Jelena I installed Win7 Toshiba upgrades and clean install Win7 on more than 10 different Toshiba notebooks and didn t have a problem except the feature FN keys on an old Satellite A200.

  Anyway, when you upgrade pre-installed Vista notebook with original Toshiba upgrade kit you need to just follow the instructions you have with her. Instead of the first composite (drivers) drive and it will be your system and you inform that drivers must be removed from the system before the start of the Win7 update. When the drivers and some tools from Toshiba is deleted, you must use second upgrade for Win7 upgrade disk.
  After doing this put the first disk again and check for the installation of compatible drivers.

  That is so easy to do and I don't really understand what is happening with your laptop. After reading your ad I think you've done the installation of own OS and not an upgrade. What did you do exactly? I mean after upgrade cannot be so conflicts of hardware in Device Manager.

• I have a HP envy j000 and I installed an SSD.

  I have a HP envy j000 and I installed an SSD. If I look at MYPC, it doesn't have the installed ssd. If I look at the Device Manager it shows the installed ssd. What's new?

  The SSD is probably not formatted and mounted as a drive in the system. In other words, it is empty. Right-click on MYPC and choose manage... go to disk management and find the SSD. Make a new simple volume and ntfs format and then assign a letter reader and you'll be good.

• I use 1023TX dm4, and I install the windows 8, it have problem ATI display driver

  I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?

  Hi Tomiko094,
  
  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
  
  Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
  
  This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
  
  I hope this helps.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• How can I find out which updates installs successfully on stop and then install?

  My (6) updates are not installed when I shut down my computer. This has happened for several weeks. I do not force stop or unplug it. I can't understand who (s) update by installing does not correctly. How can I find out which updates won't install correctly and then install them?

  View update history.

  For Windows Vista:
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  For Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  For Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  For Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  TaurArian [MVP] 2005-2011 - Update Services

• Windows update KB979909, KB982168 and KB974417 install over and over again

  Windows update KB979909, KB982168 and KB974417 install over and over again. This update I had during the last few weeks over and over again. Installation and restart and the update comes again. How can I stop this? Looks like the only way to stop the automatic update for windows :-(

  permini,

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  KB982168

  KB982168 is optional, not updated safety information. Feel free to hide it

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Stop (stop the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]

  Open the download folder and delete its contents

  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselectKB982168 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click on Start (start the service will take a moment)

  --

  reset

• How to uninstall Windows XP, save data and re-install Windows XP

  My computer is running very slowly; Some programs take literally minutes to appear. I have the disks so I figure I'll uninstall and reinstall. I would like to save the data of losing it; address of e-mail etc. Do not know how to proceed. Thanks for any comments.

  Technically speaking, you uninstall an operating system as such, you just format the drive where it is installed and then install another OS or use the drive for anything you want.  This is the easiest part, just start the computer with your CD of Windows XP and the disk & partition selection screen, select the partition where you want to install Windows XP, and then format the NTFS partition and proceed with the Windows installation.  Very important: make sure you have the Windows XP product key BEFORE you to format the Windows installation!  Without the key, you will not be able to install Windows XP.  If you have lost the key, it can be retrieved the operational facility before formatting it.  You must also have the latest drivers for your as motherboard and chipset at hand, these are the first drivers you need to install after installing Windows, then you normally install video drivers and other drivers.  It helps a lot if you know what hardware is installed and if you have the drivers on hand or that you know at least that the manufacturer has them available on their site.

  Save your settings and personal data may be a little harder, if all your web browsing is done with Internet Explorer and if all your e-mail is done with Outlook Express you can use the files and Settings Transfer Wizard to save these settings and files and then restore them to the new facility.  If you use another browser or web e-mail program and then saving those settings and files will depend on programs.

  With regard to your personal information only you can know or decide what should be saved, usually most of your data would be in your profile (C:\Documents and Settings\Votre user name) folder, but we all know that most of the users themselves with data stored outside the profile folder, you should know where your data is and then back up to CD DVD, s, external or second internal drive or another computer on your network.  If you ask me the safest way is to clone the hard disk whole or all but the Windows folder on a second hard drive to backup.

  PS: It's also things go much faster if you first download Service Pack 2 and Service Pack 3 and burn them on a CD beforehand.  Install them AFTER installing the drivers.  (You have SP1 or SP2 installed prior to installing SP3, you can install SP2 without SP1).  He's going to win a lot of time when you go to the Windows Update site if the installation is already upgraded to SP3.

  John

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941