T60 2008 CM5 graphics card

Similar Questions

• iMac 24 "beginning 2008 A1225-graphic card replacement

  Hi all

  I would ask you if

  ATI Radeon 4670 256MB

  or

  AMD Radeon HD 6750 M 512 MB

  are compatible to replace the

  NVIDIA GeForce 8800 GS 512 MB

  on

  iMac 24 inch early 2008 A1225

  
  

  ?????????????????????????
  

  Thank you!

  # Also, it is not likely that your 8 year iMac is worth the cost repair.

• How to upgrade the graphics card (gtx 770 or 980) on Mac Pro 3.1 (2008)?

  Hey,.

  I am looking to update my graphics card on my Mac Pro 3.1 - I currently have a GTX 660ti but I was looking to upgrade to a GTX 770 or, if possible GTX980.

  I have a few questions (GTX 770):

  • Power required: I found a tutorial , but I'm still not sure if the GTX 770 will draw too much power from the PSU?  The TDU is 230w and there are a lot of online chat on do not go above 225w.  I also noticed that my mac pro 3.1 is about 980w - so I'm confused as to why the limit of 225w has been mentioned (something to do with the power being driven by pci slots?)
  • Wiring: The gtx 770 has 1 x 6 pin and 1 x 8-pin connectors.  What/how should I connect to these terminals?  The tutorial mentions buying a Y 2 x 6-pin connector.  Is anyone able to confirm this?
  • Experience: Are confirmed cases of the GTX 770 works on a mac pro 3.1?

  Finally - I wonder about a 770GTX since I.  What is the best card (for games) that confirmed cases of work with the 2008 3.1 mac pro?

  Any help is appreciated and thanks in advance.

  The location PCle supplies 75 watts max. Each of the two connectors on the system board each supply 75 watts max.

  So, you can get 225 watts which for me is pretty close to 230 watts.

  Others have successfully used the 770

  Mac Pro 3.1 (early 2008) new graphics card, what are the options?

  http://www.tonymacx86.com/general-hardware-discussion/115429-GTX-770-Mac-Pro-ear ly-2008 - a.html

  Here's to 4.1, basically the same the 3.1 regarding graphics is concerned

  9-with-a-GTX-770-PC-card/ https://stephenmonro.wordpress.com/2014/03/27/Time-to-upgrade-the-Mac-Pro-41-200

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• T60 (1953) change of the video card to ATI Radeon graphics card

  Hi guys, I have a Thinkpad T60 (1953). Every time I'm playing games or watching a video, the really poor sound quality. Also, I wanted to know if I could even change my video card. I have a Hp Dv5 dead, and there the ATI Radeon graphics card in it, so I wanted to know if I could change this graphics card to my T60?

  "evening.

  The only way to upgrade the graphic subsystem on your T60 would be to swap the motherboard in correct with the GPU you wanted that they are welded, unlike one half CPU.

  Kind regards.

• T60 graphics card problem

  Hello!

  I worked with my T60 2007 - FUG almost 2 years with windows XP. Now I switched to Windows 7 32 bit. System has been installed on clear 320 GB WD hard, everything works fine, except the graphics card... (Radeon X 1300)

  When I try to activate Aero, use a screen saver, or start a game etc, an error occurs:

  "The --whatever-- can't run because it requires a newer video card or one that's compactible with Direct3D"
  

  I tried some graphics drivers, first some Lenovo website (graphic driver W7 is missing, then I used windows Vista one, according to the posts here, it doesn't matter). Then I tried to download the drivers directly from amd.com but nothing helped.

  I guess that this problem is in the graphics card, because when I use the ThinkVantage Toolbox for more information on device I saw this:

  

  I think, there should be a graphics card: ATI X 1300 and instead 64,00 MB memory video card.

  Adapters for device/system/control panel/display of the Control Manager to show me only Standard VGA Graphics Adapter, which is what you see in the image to the top...

  I'll be very grateful for any piece of advice, thanks!

  Czech Dave

  Try running Windows Update and see if she will be able to locate the correct driver.

• Mac Pro early 2008 recommended the replacement of the graphics card

  No display but the monitor is OK when it is associated with the laptop.  Suspect graphics card (ATI Radeon 5770) has reached the end of his professional life.

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  http://forums.MacRumors.com/showthread.php?t=1440150

  With only of Snow Leopard, your choices are limited

• faulty graphics card may adversely affect startup iMac?

  Hello

  My iMac 24 "2008 beginning, which I've recently equipped with an SSD (running El Cap) to replace the original HD, is does not start. The boot process gets stuck on the white Apple screen, about a 1/3 to the top of the progress bar. The screen goes black, and then it restarts again a couple of times and finally get the prohibitory sign.

  I've tried and failed: recovery mode and safe mode and reinstall the OS from a USB key.

  Also tried to open mode target on another computer - but the other computer is even older and running what OS 10.6.8 and which is perhaps the reason why he could not mount the SSD drive.

  Finally, I decided to take it to a laboratory. It is a decision that I tried to avoid because that where I live, there are not many Mac users and I never know technicians have enough experience to know what they are doing and I doubt they have the Apple official diagnostic tools.

  The technician said that the SSD is very good and the problem is caused by the graphics card. The repair would be costly be useful.

  My question is if this diagnosis is logical, since the screen displays the appropriate color and graphics for the various things I've tried (until he got stuck).

  Thank you!

  The computer has never started since you installed the SSD? You might want to examine your procedures or try to boot from an external drive to test. You can solve the problem yourself by checking the LED diagnostic on the logic board https://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2134+and+2211+Diagnostic+LED %27s/7443 if LED 3 lights not it is likely that you need a replacement for the GPU.

• Processor or graphics card for the best HD video in the Web?

  I use a Mac Pro (early 2008) 2x3.2 GHz Quad Core Intel Xeon. I bought it used from a computer store.

  The graphics card is NVIDIA GeForce 8800GT 512MB.

  My memory is 20GB 800 MHz etc etc.

  I'm on Yosemite 10.10.5, using 6.0.5 FCP (Final Cut Studio 2)

  I shoot HD 1920 x 1080.

  I notice the game back in the looks really rough canvas so I used the computer for all other applications prior to use of the CPF.

  It is smooth only when I use first of the PCF after the computer starts. Sometimes, when I reboot, it will be good but soon begins to become unstable again.

  I'm not sure if it's because my computer is not fast enough? strong enough? Do I need a faster processor or better video card?

  I guess the memory isn't the question after reading other topics. But I have not found a topic that addresses this issue.

  Advice appreciated. Thank you.

  20 GB is an odd number. Your RAM should be installed in multiples of 4. 4 GB, 8 GB, 16 GB, 32 GB.  Although I do not know if what matters a lot. You have a lot of RAM, because the FCP uses only 4 GB max.

  The issue could be the fact that you run FCP 6 on an unsupported operating system.  The latest OS supporting FCP 6 was 10.5. FCP 7 last supported on 10.6.8... since then updated all the BONES do not take into account legacy CPF work into account.  You are 5 OS versions past version full support, so the application does not work as well as it would on an operating system supported.

  Now... you say you shoot HD 1920 x 1080... you convert when you bring it in FCP? What codec is when you cut it? And this drive it is stored on? Logged how?

• Block POWER & Presario SR2020NX upgrade graphics card

  Hello world!

  My sister in law has a Compaq SR2020NX with one, (I think), 250 watts power supply.  She would spend the onboard graphics chip 6150LE to a dedicated card.  I am sure that she will need a new power supply for it but am not sure that the form factor.

  Can someone tell me if its system will accept a standard ATX PSU?  Or otherwise, that I am limited to?  Require a 24-pin (or 20 + 4) connector on the main Board?

  The PSUS that I'm interested in right now are the Antec earthwatts EA430

  or the Antec earthwatts EA380

  In addition, given that I'm here, can I also ask on the graphics card?  I think something like this model EVGA,

  One last thing, does anyone know if the chip 6150LE will accept the standard Nvidia driver?  If not, is there another source for updates of driver for this chip?

  Any help will be certainly appreciated!

  Thank you

  Larry

  Message edited by jaspertheogre on 12/26/2008 12:24
  Message edited by jaspertheogre on 12/26/2008 12:40

  Any ATX should work.  The 24-pin is designed to adapt the pins 20 connections... the extra pins hang on the side.  I would recommened make the connector 20 + 4 pin... so if you don't need the extra pins you can just stand out them.

• Satellite L350 - where to find the latest driver for graphics card?

  I have a Satellite L350.
  I installed a game (EVE online) and it works as it should; However when I use alt - tab, the game crashes.
  It is not supposed to do this, and on the other PC it does not crash.

  I contacted the technical support for the game itself, and after reading my dxdiag, they concluded that it was because my drivers are up to date.

  They said specifically the graphics and audio drivers are the cause of the problem.
  I have a Mobile Intel (r) 4 series express chipset family graphics card, and the driver is dated 06/12/2008.
  my sound card is realtek audio and is dated 11/02/2006.
  I tried to update the graphics card on the site of intel, but the program tells me the installation was not validated for this computer and I had to contact the manufacturer.

  Anyone know where to find the updates compatible with computers laptop toshiba?

  Yours sincerely,
  LTA

  Hello trouble

  Please remember you have laptop and not of office. What you have done is just and it will help with the office, but on laptops, the situation is very different.
  Graphics card is suitable for the use of the laptop by Toshiba and downloaded driver from the manufacturer of the graphics card can not be installed.

  As you know probably common problem with laptops is heat and temperature of the material must be controlled. Graphics card too high temperature can ends with overheating and book cut or damage the equipment. Toshiba laptop to protect material must ensure on the pilots and don t allow to run on the limit.

  I must also say that your laptop is not game machine.

• How do I know when my graphics card must be upgraded on my mac

  After playing mine craft game on my Mac version 10.10.5 my Mac keeps freezing some mentioned it might be that my needs to date with a driver graphics card how do I detirmine if you need the driver for my graphics card and if so where can I download it and it is normally free thank you

  If the product worked before to ensure that the proponent supports your operating system, and that you run any Anti Virus, the management or the 'guard' software on your computer. If so uninstall it completely.

  If the problems persist drag your settings in the game. As lo-res that is Minecraft, it's actually a very complex program requiring the GPU, RAM and CPU to function effectively.

  Commonly Windows users for Mac users point to the sellers for GPU drivers as Windows GPU providers can develop their own drivers and Apple is more control is the following and almost always provide their drivers in the House, not a seller.

  To update the graphics drivers for Apple, computers are obtained through your Apple's OS X except the Mac Pro 5.1 (2010), Pro 4.1 (2009) Mac and Mac Pro 3.1 (2008) models using OS 10.10 AND using drivers Nvidia graphics processing unit (GPU). If you do NOT these particular Mac models, or that you do and for some reason you have AMD/ATI GPU these drivers are of no use to you and update your drivers that you need to update the OS for GPU updates additional if Apple actually update.

  http://www.nvidia.com/download/driverResults.aspx/78853/en-us

  You can check the AMD site to see if they have something similar to this on their Web site, although a search on the web.

  Minecraft CUDA are not used so the CUDA tools are of no use to you if you see whatever it is labelled CUDA.

  to determine your model mac go to the Apple Menu and select about this Mac...

  However where it is the driver if you have a partition Windows or Unix you can start to, you can run Minecraft in another operating system on your Mac and get the drivers on the developers site that will allow you to play the game outside of Mac OS X. drivers for Windows or UNIX will have no effect on the GPU when it works under OS X

• Vista on Satellite L300D-10 a - Graphics card reset after renstallation

  This is my story.
  A few weeks ago my computer went down, so I decided to reinstall Vista (Home Premium). After I did, I noticed that many things had changed. For example, my screensaver no longer works, and some programs said that they needed to support 3D wih video card. I knew I had a video card with 3d support, as these programs worked well before the renstallation.

  Then I looked around on the web, and I found more messages from people having the same problem, so I looked if I had an installation disc to the last video player for my graphics card, but I have no one. So, now, I'm asking if anyone knows where I can get the latest version, so I can continue to use these programs.

  Here's my card system information & video (current):
  ------------------
  Information System
  ------------------
  Time of this report: 12/25/2009, 10:02:39
  Computer name: QUB1
  Operating system: Windows Vista editions Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.090805 - 0102)
  Language: Dutch (regional setting: Dutch)
  System manufacturer: TOSHIBA
  System model: Satellite L300D
  BIOS: InsydeH2O Version 1.50
  Processor: AMD Athlon (TM) 64 X 2 Dual - Core TK-57 (2 CPUs), ~1.9GHz processor
  Memory: 1916 MB of RAM
  Page file: 1118MB used, 2964 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 10
  DX setup parameters: not found
  DxDiag Version: 6.00.6001.18000 32 bit Unicode

  ---------------
  Display devices
  ---------------
  Card name: grafische Standaard-VGA card
  Manufacturer: (Standaardbeeldschermtypen)
  Type of piece: ATI ATOMBIOS
  DAC type: 8 bit
  The device key: Enum\PCI\VEN_1002 & DEV_791F & SUBSYS_FF681179 & REV_00
  Memory display: n/a
  Dedicated memory: n/a
  Shared memory: n/a
  Current mode: 1024 x 768 (32 bit) (1 Hz)
  Monitor:
  Driver name: vga
  Driver version: 6.00.6001.18000 (Dutch)
  DDI version: unknown
  Driver attributes: Final retail
  Format/driver Date: 2008-01-19 06:52:08, 10752 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B71EE2-3A5F-11CF-9934-19C8AFC2CB35}
  Vendor ID: 0 x 1002
  Device ID: 0x791F
  SubSys ID: 0xFF681179
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel:
  Deinterlace caps: n/a
  DDraw status: not available
  D3D status: Not available
  AGP status: Not available

  Hello

  Please don't get me wrong, but the whole story is somewhat strange.
  Fact is that every Toshiba laptop comes with factory State. Your computer laptop too and after the first start you got by default settings of Toshiba. What you did later, no one knows. Maybe you have installed some additional software and the third party. Who knows?

  Now after the clean operating system installation you have these settings to factory again and absolutely identical State after purchase and first start. This along with the screen saver is strange, but it should work (Windows screensaver).
  Configuration of the software of your laptop is not known to us and it is not easy to say what you're exactly missing.

• HP xw8400: update my graphics card

  Ive has buy an ASUS Nvidia Geforce GTX 750Ti - OC - 2GD5 is such a graphics card compatible with my HP xw8400 workstation?

  Please help me this THANKS...

  Hello

  I looked at the specs of your year 2008 XW8400 workstation and found no reference to the UEFI BIOS, which is required by the NVIDIA 750.

  You can get assistance on the HP Enterprise Business Forum since you have a class business PC.

• my screen is stretched out on the side. the graphics card is Dell S1709W on Intel (r) G33/G31 Express Chipest family. I've updated my driver, but still the same. pl help.

  I got this message when I turned on my computer that some adapter was not installed correctly. could not get exactly what card was. my regular setting of the office as well as on the other program when I opened (example MSWord) appear in bulk, I want to say, images, fonts, menu bar, toolbar - all are great compared to my usual settings. It wasn't like this before. then I looked toward the high-end graphics card online and updated accordingly, but still no result. PL help me to solve this problem.

  It is installed with the operating system.

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  I hope I could help