T60 will not boot receive the beep code 1-3-4-3 any suggestions on what this might be?

Similar Questions

• T61 won't boot - get the beep code 2-3-2-4

  I have a T61 that will not boot.  It gives me a 2-3-2-4 beep error code.  I tried a google search but I can't find any documentation on what means this beep code.

  
  

• Equium A60 will not start - get a beep code

  Hello

  This laptop has problems with ATI (even those included on the recovery disk) display drivers. He created a blue screen on a dll file.

  After reading around, I found that it was recommended to upgrade the bios, after going to the appropriate section of the Web site, I downloaded the flash tool from windows for the laptop bios.

  I ran and it opened, returned to the laptop and the screen is blank, a blue ring around the power button is on, but no display.

  I left it for a period of time see if it would to restart or something, but nothing has happened, it would not be the button turn off so I unplugged the power and removed the battery.

  To again turn on the laptop, it only stays on for about 3 seconds then turns off again.
  I get the beep code: short break, Long, short break, beep, beep beep, then it turns off.
  The caps lock and numlock keys are turned on.
  The DVD drive light blinks.

  But other than that, no display etc.
  Ive tried the battery leaving aside for awhile.

  Anyone have any ideas why flash bios toshiba own this would cause? Also what can I do about it? in any case to recover the bios etc via a recovery mode?

  Thanks in advance.

  PSA67E

  Hello

  Well, unfortunately for me it looks like a hardware failure.
  Maybe the motherboard is broken.
  These problems may occur if you use a bad BIOS or the incorrect BIOS update procedure.

  Please check this document FAQ How to upgrade the BIOS:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Unfortunately if there is something wrong with the hardware you should ask Toshiba service for assistance.

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• NB100 will not boot from the XP CD in the external USB CD/DVD drive

  I try to install XP Home in my NB100
  The netbook still refuses to boot from the XP CD. It's just not more
  Returns the current operating system (Ubuntu) or give the error "Could not find NTLDR" dreaded.
  And yet - it will boot from an Ubuntu Live CD disk perfectly fine, AND
  If I connect this external hard drive on my computer Windows 7, (another Toshiba
  Portable satellite) that the machine starts quite successfully since the XP CD
  in the same external drive!

  Can anyone throw any light on what is happening on Earth on?

  Hello

  There are various reasons why this error message:
  In most cases this error because the laptop is trying to boot from a HARD drive or flash drive that is not configured correctly. Maybe the drive is not bootable or not compatible.

  It would also be possible that some sectors on the HARD disk, HARD drive failures are corrupt or BIOS is damaged. NTLDR error messages may also appear if the master boot record is damaged.

  In your case I recommend that you format the first HARD drive before booting from the hard drive CD7DVD external using Win XP CD.

  By the way: you must add SATA driver to CD Win XP using nLite.
  The SATA driver is placed on the European driver Toshiba page in the Intel Storage Manager

  The SATA driver is needed to recognize the HDD by Win XP!

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• Windows 7 for Lenovo G50-70 - the computer will not boot from the CD

  Hello world

  I hope that someone here will be able to help

  I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)

  Can someone help, please?

  See you soon

  PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;

  I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!

• HP Envy 17 t-j100 Notebook PC - HP BIOS upgrade Assistant. PC will not boot to the top.

  After reading the various posts, I solved the problem.  I disconnected the power and removed the battery.  I then reinsert the battery connected the power cord and press the power button.  Update the BIOS 'recovered', continued, and the system finally started.  I was able to enter my password and the system works normally now.  I'm not a computer expert, so this experience was really scary.  I hope that my solution helps someone else.

  McTavish2012,

  Support from your computer - a LOT of good information here pages: manuals, drivers (there is more that you need - compare with what you see in the control panel > display icon > Device Manager), troubleshooting...

  all kinds of "stuff".

  You must select your exact model and there you go!

  Series of Quad Edition Notebook PC HP ENVY 17-j100

  I have my Windows as well updates the value of Notify - this way, I get to decide when I want to actually install the updates.  Just a personal whim.    I always create my own restore Points before making changes, too. the computer should do, of course, but I learned to do this on my own.  You can do it whenever you like - just give it a name and it will be there when you want later.  Don't get carried away, though - just so many of them and they take a little space.

  ·         Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  Just for fun - Dragon's Document:

  Features of Windows 8 - a Quick Tour

  Happy computing!

  Return at any time-

  Search for any topic of interest to see what others say or ask a question.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP Pavilion p7-1414 will not boot from the CD

  Hello

  I recently bought your desktop HP Pavilion p7 1414, I am trying to boot from a CD to reinstall Windows 8 - I put the CD to start first in the BIOS, but when I restart the computer and I have the CD, "press any key to boot from the CD" is not displayed.  It starts just directly to the computer HARD disk in Windows to connect.

  I have 64-bit Windows 8. 6 GB of RAM and a terabyte of HARD drive space.  I'm looking to reinstall Windows 8 for a new start.  Any ideas why it won't boot from the CD?

  Very happy!

  Hello:

  You must go into the BIOS and enable the legacy Mode and disable secure boot.

• R3000 Presario will not boot from the cd after installation of windows 7

  Hello

  I have an old Presario R3000, someone updated to windows 7, has a few problems, including the cd player read don't not bootable disc, because I would like to install Vista instead, any suggestions on how to solve this problem, thanks in advance.

  chefey aka David

  Hi Futoji

  Portable office, dismissed plugged DVD and voila, it worked. I have an installation disc Windows 7 Starter and installed as I thought it would be better for! GB of memory, was not bothered with it runs, so Vista, installed fine. Some drivers are missing, sound and player card, as it's XP, so no drivers HP, I have a fixed front sound, means add files in a folder of the directory, will have to google search it again once, thank you very much for your advice, which fixed the problem, I am not too bad for a surfer of money. I know the numbers of the missing drivers, it's just a case of locaing, some of the download sites are very confused. Once agai thanks.

  David

• EA6500 will not send/receive the cell text and multimedia

  I just took an EA6500 on clearance.  It works very well for all applications except text messaging.  I can send and receive texts and multimedia on all other WiFi connections I use, but it does not work on my EA6500.  Is this standard, or is there a place I can change the settings?

  We are with US Cellular by using an old Samsung (not sure of the model), two S7s and an iPhone 6 (more or sPlus... not sure), more on WiFi an old M bike, only.

  Thanks for any help on this.

  Natalie

  Cell phones use the cell signal from the phone to the normative texts and the data connection of the phone for multimedia content.  None of this happens on WiFi.  It does not work on all other WiFi connections, you are confused.  Text works when you have cellular signal and the works of content media when you have a valid data connection.  Maybe it would help if there is an application that transmits over the internet, then on mobile networks, but not using the original text/sms on the phone app.

• Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

  HP Pavilion dv4
  TSST Corp CDDVDW TS-L633L ATA Device

  Control Panel / problem report and solutions
  Problem: Could not load software driver status: sent report

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000013
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 619663520

  Control Panel / Device Manager
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried:
  Update driver software
  Uninstall / find the hardware changes
  Uninstall / reboot / new hardware found
  Properties / verification solutions

  How can I fix it?

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  You have to restart the laptop after that.

  Kind regards

  DP - K

• Windows 7 Explorer stopped working, the PC will not boot with the dvd or usb.

  Original title: Windows 7 Explorer stopped working - just after the start, every time, white screen, hands tied!

  Very technical - old level 14-Blue Badge LOL

  No hardware problem

  that nothing loaded clean pc startup

  Impossible to access anything whatsoever to run anything

  Normally, I would go into the bios, change boot cd and do an inplace - right upgrade

  Dam thing does not start on dvd or usb.  only the hard drive.  It's a Dell T5500 with SAS

  Original title: Windows 7 Explorer stopped working - just after the start, every time, white screen, hands tied!

  Very technical - old level 14-Blue Badge LOL

  No hardware problem

  that nothing loaded clean pc startup

  Impossible to access anything whatsoever to run anything

  Normally, I would go into the bios, change boot cd and do an inplace - right upgrade

  Dam thing does not start on dvd or usb.  only the hard drive.  It's a Dell T5500 with SAS

  "Normally I would go into the bios, change boot cd and do an upgrade inplace - right

  Dam thing does not start on dvd or usb.  only the hard drive.  It's a Dell with SAS T5500"

  Found a box that prevents the bios to booting from anything other than the hard drive in the BIOS, under Security.  Stupid because it still allows you to change the order of boot without any error message.

  Once I changed I could boot from the cd and fix corrupted files.

• Tecra M3 PTM30A will not boot from the cd to reinstall windows

  Hi all

  Totally new here and I have a question. I replaced the hard drive in the laptop, the old man died.
  I set the bios to boot from the cd. He reads the Windows XP cd for a minute then jump to trying to boot on the network adapter.

  Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?
  If it can boot from a normal cd is the stuffed ROM or am I missing something?

  Thanks in advance to anyone who can help you.

  Hello

  > I replaced the hard drive in the laptop, the old man died

  Your new hard drive is recognized by the Bios?

  > Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?

  You can use a recovery (if available) disk or Windows disk copy. In the Bios, you must set the Cd/DVD-ROM as 1st boot device and press F10 save and exit. Turn it back on. Thus, your computer you should start the installation of the Cd drive.

• adobie xi not to recognize the product code. How to reach live help? What is a phone number?

  Adobe does not recognize the product code. What is a live person phone number to get help?

  Start here: http://helpx.adobe.com/contact.html

  Note that phone support is only available Monday to Friday during reach US in the day; other than that use the chat.