T61 Safe Mode - slow GUI window scroll

Similar Questions

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• error unmouvable_boot_volume vista, no safe mode/cmd/recovery/windows install

  First of all, sorry for my English.

  If I get the BSOD loop, the error is unmouvable_boot_volume, I can not in safe mode or any mode, including the F8 options, I tried the recovery (windows vista and xp) cd, it does not, vista cd gets stuck with a black screen and a cursor (mouvable) white, so I can't even install windows because I get no option... xp cd works until it saids 'the hard drive was not detected' or something like that... but when I enter the BIOS, hard drive option is here... I don't know what to do, help me please!

  Hello

  See if this information helps you:

  https://NeoSmart.NET/wiki/unmountable-boot-volume/

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  See you soon.

• When I restart and press f8 to go into safe mode, I can't scroll to the top I use the arrow keys, but she will not go up

  It shows the possibility to go in safe mode, but I can not just ride to select

  Try using the arrow keys on the numeric keypad (key '2' and '8'), but for those to work, your "Num Lock" must be disabled.  (Press the NumLock key, until the light Verr off Num).

  If this does not work and you are able to boot into normal mode, you can configure so that it starts in safe mode using "msconfig":
  Start-> Run-> "msconfig".
  Start msconfig, click on:
  Win.ini (tab)-> and then place a check mark in front of "/ SAFEBOOT"-> click on 'OK '.
  Restart your computer.
  He will then start safe mode.

  HTH,
  JW

• Access to the Safe Mode on Windows 8

  Hello

  I understand sometimes through troubleshooting or for other reasons, there is a need to access safe mode when using windows 8. What many people do not know is Windows 8 does not use F8 at startup to access the secure mode. It needs to be done inside of Windows 8, himself. The screenshots below will show you how to access safe mode when you use Windows 8.

  On the startup screen, click settings:

  

  Then click on change settings for PC:

  

  Click gernal on the left side of the page:

  

  On the right side scroll advanced boot:

  

  The computer then stops, and you want to click on troubleshoot:

  

  Click on advanced options:

  

  Click startup parameters:

  

  You will then see a page that lists information, click Restart on the right:

  

  You will then choose which environment you want to connect to:

  

  I hope this information is useful

• Thunderbird is stuck does not. even in safe mode. (win7) SOLVED by disabling Windows prefetch and superfetch services

  Thunderbird is stuck in the mode "not responding". I tried various fixes suggested on the web, such as restarting in safe mode, using Thunderfix and except on records of Thunderbird to antivirus scans, but nothing works. FYI, my antivirus is Norton Internet Security. I hope someone can help. Thank you.

  You could take a little further...

  Please start * Windows * safe mode with active network
  -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
  -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

• I have Windows 7 Professional; Firefox work anymore; Click the icon and the circle of towers; can not enter in Firefox, even in safe mode. Help, please.

  Windows 7 Professional
  Windows Security Essentials

  I clicked on the Firefox icon. The cursor has changed from an arrow to a spinning wheel. Nothing happened. It remained like that for 20 minutes until what I went into the Task Manager and stop the program.

  I am forced to use Internet Explorer and it's awful. Please help me.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  You can use one of them to start Firefox in safe mode:

  • On Windows, hold down the SHIFT key while starting Firefox with a double click on the shortcut to the desktop Firefox
  • On Mac, hold the Options key when starting Firefox
  • Help > restart with disabled modules
  • https://support.Mozilla.org/KB/safe+mode

• Firefox does not, as soon as I open the window solutions, may NOT START in safe MODE?

  Recently, I accidentally begain download some unwanted addons - but I cancelled the download before being finished and quickly removed the programs by uninstalling program files issues. Firefox worked pretty well at the time, but later he started to become less sensitive. I did some cleaning (clear the cache, etc.) and done a virus scan. Has not made a difference.
  Eventually he started to get like some that I open a firefox browser - becomes inadmissible. The first two times, disconnection and reconnection to my connection int fixed. But now is not working and even after uninstalling and reinstalling firefox, it is inadmissible. I should have the version 6.0.2
  Finally, there is no way I can run firefox in SafeMode because as soon as I open the browser it is inadmissible, which means that I can not even access toolbars.

  -> Close Firefox

  • Click the Firefox button, and then click exit
  • NOW press CTRL + SHIFT + ESC keys to open the--> Task Manager process tab-> click right firefox.exe and click end process tree -> close the Task Manager

  -> Start Firefox in Mode safe by holding down the SHIFT key when you start Firefox

  • As alternative method, use the Win + R key combination and enter one of the following values in the box run Windows:
    • Firefox-safe-mode
    • "C:\Program Files\Mozilla Firefox\firefox.exe"-safe-mode
    • "C:\Program Files (x 86) \Mozilla"-safe-mode

  -> Safe mode of Firefox window will appear-> don't SELECT ANY OPTIONS, just click continue in Safe Mode

  Check and tell if its work while you use Firefox Mode without failure.

  -> Themes and extensions troubleshooting

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

• How to exit safe mode in windows 8.1

  I entered in the Mode without fail my desire TS 15 running windows 8.1 to correct some problems with my Norton software and now I can't understand how to exit back to the normal mode.  Internet is off in safe mode (even though I chose the mode safe mode with networking) so I can run any of the resolutions & assistance.  Someone knows how to do this?

  Nanna,

  Welcome to the HP Forum.

  Try / review

  Control Panel > display icon > Administrative Tools> System Configuration >

  Boot Tab > UNCHECKstartup

  Restart/ reboot the computer and log in

  OR

  A different path to the same place:

  ·         Start Notepad and let it boot mode safe

  ·         Open a session

  ·         Windows key + R(open the run window)

  ·         Type msconfig

  ·         Opens the System Configuration Menu > tab click on Boot

  ·         REMOVE the check mark next to startup > Applyto save

  ·         Restart/ reboot

  ==========================================================================

  In addition, you could do your router security is set to

  AES encryption type

  and

  WPA2-Personal security type

  ==========================================================================

  For later, it's very useful to have, and it is easy to set up.  I did it.

  Safe mode can easily be added to the start screen.

  How to add 'Safe Mode' to the Windows in Windows 8 boot manager and 8.1

  From:
  Features of Windows 8 - a Quick Tour

  Click on the Thumbs-Up Kudosto testify and say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I can only connect to Windows safe mode. I get a blank screen otherwise

  Original title: I can only connect to my computer in safe mode. Start windows normally my screen begins to blink on the logon to the black screen. What should I do?

  I was told it had something to do with internet explorer and that I need to update my windows, but my computer won't let me.

  Safe mode is a number of things.  First, he starts using the clean boot programs needed to operate.  Second, he began to use a screen resolution 'safe' which is supported by all monitors (usually 640 x 480).  Your problem may be due to your video card being assigned to a resolution that your monitor does not support or does not reach.  If it is a recent development, the fastest solution may be to perform a system restore to a time before you had this problem.  You can do safe mode.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  Another suggestion is that, after the safe boot mode, change the display resolution (right click Desktop-> properties-> settings tab).

  If those who do not resolve your issue, you can use Microsoft System Configurator, msconfig, to choose what programs launch at startup.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• will not let me delete Java and other programs. Say I am running Windows in safe mode?

  Can not remove some programs

  Hello

  ·        Why are you starting in safe mode?

  ·        Do you see the safemode, written on all four sides of the screen?

  If you see you're starts in safe mode so you can't uninstall programs in safe mode since the Windows service install will not work in safe mode.

  Windows service install is responsible for installing and uninstalling a program on the system.

  I suggest to start the desktop normally and then check if you are able to uninstall the program on the system.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Why my VAIO VGN-FZ31S with Windows 7/Vista will only open in safe mode?

  I've been having a lot of trouble recently and think that it was caused by a virus.  However my Vaio only now starts in safe mode, and I have warnings that firewall is not on, and Microsoft Security databases are not executed.  However, I can't download MSE on the web, because I get an error message telling me that I can't download it because I am in safe mode.  Similarly, I get the same messge when trying to do other operations.  How can I get the computer opens in normal mode?

  Thanks for any help.

  sturrdave

  Hello

  Two suggestions for you.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  _____________________________________________

  Here's how you normally get out of fashion without failure:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• you try to start windows in "safe" mode

  I have been instructed by my virus software provider to start my computer in "safe" mode They told me to press F8 and keep it pressed until the safe mode options. I tried this but it seems that the F8 key doesn't seem to be holding options that are "safe". All I get is my normal screen 'connect' where I get my password. I'm not computer literate, so any help would be grateful but make it easy to understand!

  I use Windows Vista Home Basic, and IE8. I use Avir Antivir anti-virus software

  Hi baz1941,

  In order to start using safe, you can consult the following links and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista premium edition starts only with the safe mode or safe mode with network.

  There was a low voltage or surge protector and the computer came out. System Restore does not work.

  Hi ValrieSingh

   

  1. have you tried to start in normal mode after the issuance of the power?

  2. what happens if you start in normal mode?
  3. do you get errors in normal mode?

   

  You can check results when you activate the mode low resolution. It starts Windows using your current video driver, frequency settings low resolution and refresh. You can use this mode to reset your display settings.

  See also the links below for help on the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps.