T61p died suddenly. So sick of these problems!

Similar Questions

• My Apple Watch died suddenly

  I bought a Apple Watch in December 2015 and yesterday he died suddenly. I have it plugged into its charger, but it does not turn on. Is it a problem that I can fix myself? If negative, I have another problem. I bought the product in the USA, but I live in the Qatar. It will be my next trip to the United States after expiration of the warranty.

  Thanks in advance for your suggestions.

  Hello..

  "Is it a problem that I can fix myself?

  
  

  If all goes well, Yes.

  Try the above troubleshooting steps > If your Apple Watch does not respond or won't turn on - Apple Support

• my laptop died suddenly, and a long beep

  I have a problem in the laptop 3-year-old G42 366 Tx, when I use it, the screen suddenly triggers the white line and within 1 second turns grey, then the laptop screen died suddenly. and emits a sound signal is almost 5 seconds. due to fears of a problem that is more fatal. Then I unplug the laptop battery...

  so I try to turn it back on, and the laptop runs normally. This has happened 3 times. Please help me. If the natural damage in this laptop. I would appreciate any help from you... Thank you...

  Hi Hayusal,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP G42-366TX and get white lines on the screen. Here is a link to overheating which could cause results that you tell me everything.

  I hope this helps.

  Thank you.

• Palm pre more died suddenly!

  A few days earlier, I have updated a few applications including webOs, phone worked fine for a few hours. then he died suddenly in the middle of browsing a web site.  Phone is relit when it is connected to the charger but it was very slow, tactile does not work unless the cursor was opened.  Called Palm rep and she told me to try cleaning battery, made phone worked fine for a few minutes and then he went away again now all I get if the battery question mark icon and when connected to load (btw the battery charge was at 97% when all this happened) waiting for a new battery but is there other advice can someone else give me?

  You are welcome! I'm glad to hear that you problem has been resolved.

  notimeoff

• These problems occurred after letting down my IPhone

  A day ago I dropped my iPhone 5 c down a flight of stairs (accident). Since then, these problems started to occur

  -Time might work until I turn off my phone and the time would be given at 12:12

  -Battery percentage would remain the same, so I don't know what percentage of my phone is.

  -I don't get messages

  -I would like to connect to wifi and it would be disconnec and reconnecting constantly

  -Some applications do not respond when I tap on the screen

  - and here my flashlight would begin to Flash for a few seconds.

  I've already restarted my phone... And I'm out of ideas of what to do.

  Thx for the help

  Take it to the Apple Store to have watched it.

  Good luck

  GB

• After upgrading to IOS 9.1 my iPad2 crashes constantly and Safari takes more than 30 seconds for the loading of the page.  When Apple will solve these problems, given that the downgrade isn't possible?

  After that the IOS upgraded to 9.1 on my iPad 2, the unit has switched navigation performance and each app is lagging, and then crashes the device, to be hard restarts.  Changing such settings recommended in many articles does not improve these problems of performance or speed.  Given that the downgrade is possible, when Apple will release 9.2 to solve all these problems of performance?

  These are performance problems widespread in the complaints I've seen on many articles, even in this community and discussion forums.

  Uh, no.

  iPad 2 questions are far from "widespread".

  Each user who has problems with their brand of Apple devices claimed that their problems are widespread disaster.

  users of iPad 2, 3 and 4, like me, don't post troubleshooting forums if their iOS/updates updates update succeeded.

  Here are my updated list of corrections suggested for a model slow iPad 2, 3 or 4.

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

• T500 died suddenly...

  My T500 died suddenly... No power seems to be entering the laptop at all. I confirmed the AC, the battery and the ram are all OK.

  I tried to remove the battery, holding the power button for 30 seconds, remove the ram/hard/ultrabay drive, etc. Nothing works. After I have plugg AC to the laptop, the led bars show AC. However, as soon as I press the power button all the lights are off. Without the memory live, the laptop didn't do not matter what 1-3-3-1 beep...

  I searched online and also in this forum and must unfortunately conclude that it is the motherboard is dead... Maybe consider buying a new laptop since my T500 is already 4 years... Too bad I really like it and did a lot of upgrade over the past four years (1280 x 800--> screen 1920-1200 screen, hdd-> ssd 4 GB-> 8 GB, cd-> ram ultrabay..)

  Sorry to hear that, it looks like your motherboard is really toast. But get a planar replacement should not be expensive today, especially as the Intel models only.

  If you were satisfied with the performance, it would be useful to keep it IMHO, especially since you have contributed up to the top.

  My grain of salt

• I got more than 50 error messages in Event Viewer. How can I fix these problems?

  Between 3:45 am PST and 5:46 am PST, I found more than 50 messages of error in Win XP Home Ed.  SP 3, event viewer.  Can someone help me to solve these problems, please.

  First of all I would like to clear you all events, right-click each of the topics and choose erase all entries, you can save if you wish.

  Then run checkdisk:

  Here's how to make a bootable xp recovery console cd

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Disk-Defragmenter-has-detected-that-CHKDSK-is/397271a9-2417-4261-8fc7-145678b6a876

  read the response of L. Elder

  It is easier to run from the recovery console as it will mean less restarts, but you can go to start, run, type CMD and press ok

  in the cmd prompt box type chkdsk c: r, and then press enter

  Type a y for Yes to run at the next reboot, and then press ENTER.

  Then restart your pc, allow checkdisk run and complete, if errors are found and fixed, then run again until no errors are found.

  You can view the report in the event viewer, Applications, Winlogon.

  After the last checkdisk you run, then check the most recent errors that are listed after the last checkdisk.

  How many are there now?

  Your reply message, please include the following information:

  current antivirus

  brand, model and model number

  Click Start > run > type or paste msinfo32 > OK. Copy and paste the content in your response.

• How to fix these problems-RealtekRTL8139 Family PCI Fast Ethernet NIC - failure, failure of DHCP server DNS - a failed, Proxy Web IE Failed Server

  I can't access yahoo or gmail email, I can't play games online and java installs on my home comp. ed. - windowsxp, I ran the system diagnostics and it entered all these things as having failed. DHCP server computer was not able to renew is the network address, the semaphore time-out period has expired, the ip address 205.185.234.119 for the network card with network address 00402B7C88DD has been denied by the DHCP server 0.0.0.0, it sent a DHCPNACK message, your computer has lost the lease to its IP 192.168.100.1. Proxy Internet Explore web 127.0.0.1 Server failed, seems to be running on ports - zero, the search of DNS servers failed order. HELP how I can solve all these problems?

  It should be fixed, had to use unlocker in safe mode to remove (the hosts file that was read-only)

  Given that I could not delete it in safe mode either. But trojan remover updates now (Nothing could be updated). So I would say its fixed.

  And something had added a proxy and added something to svchost in the registry. What trojan remover removed.

• My m4 phone died suddenly

  My mobile m4 died suddenly...

  It doesnot open

  I tried to put it on the charger but it doesnot work either.

  But it's hot during charging

  You can also hold the power and volume up until you feel a set of 3 fast vibrations

• Images high resolution that I matter IIN indesign appear in a definition very mlauvaise to the screen and once exported to pdf, they are still quite far from the original. Perhaps to remedy these problems.

  Images high resolution that I import in indesign appear in a very bad definition on-screen and when exported to pdf, they are still quite far from the original. Perhaps to address these problems?

  The bad export quality could be linked to the pre-selection of PFD you have chosen. Some of the presets are designed to re - sample images to make a smaller final PDF

• Unable to connect to the MKS: the certificate of the remote host has these problems:

  Hello

  We have a host of ESXi 4 cluster running any vSphere 4.1.  Recently, I started to upgrade to update 2 and all the additional fixes.  After the upgrade of the vCentre server to the latest version (or maybe before I can't noticed) an of are hosts began to show the following error whenever I tried to connect to the console of any guest on this host.

  Unable to connect to the MKS: the certificate of the remote host has these problems:

  It lists any problems at all and no error display in the event log that it simply does not work.  I had a prod around the internet and found nothing.  I then rebuilt the host to exclude and the problem remains.

  Any help would be much appreciated.

  Thanks in advance

  David

  If you can connect to the Console remotely using VMware Infrastructure (VI) Client connected directly to the host, take a look at vmware KB to connect to a remote virtual machine fails with the error: the certificate of the remote host has these problems

  but more generally - remove host to vCenter inventory and then add the host to the back, take a look at opening in the console of the virtual machine after a new installation of ESXi or ESX fails with the error: the host certificate chain is not complete and could not connect to the MKS: the certificate of the remote host has these problems

• When you encounter ORA-12805: parallel query server died suddenly

  What is the best practical appproach for dealiing with ORA-12805: parallel query server died suddenly?

  $ oerr ora 12805
  12805, 00000, "parallel query server died unexpectedly"
  // *Cause: A parallel query server died unexpectedly, PMON cleaning
  //         up the process.
  // *Action: Check your system for anomalies and reissue the statement.
  //          If this error persists, contact Oracle Support Services.
  //          See trace file for more details.
  

• 6457 - Lenovo T61p has suddenly stopped working!

  My Lenovo T61p 6457 has suddenly stopped working.

  When I turn it on I see the power and drive green lights HARD turns on and since another computer on my network I can access individual files on the hard drive the T61p.

  However when I connect the T61p via a VGA cable for an external monitor to work I don't see Windows or images on the screen!

  Do you think it is just a problem with the screen or is there something else?

  The screen currently installed on the T61p 6457 is WSXGA 1680 x 1050 (Samsung LTN154P2-LO5).

  I found a job WUXGA 1920 x 1200 with inverter and cable in the box of original case Lenovo T61p high - that will work in my T61p?

  
  

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.