Tab 2 A10-70 SD card problem

Similar Questions

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• Tab Lenovo A10-70 2, 10 "Tablet without WIRE GRAVE!

  I bought the

  Tab Lenovo A10-70 2, 10 "Tablet

  2 days ago.

  It has updated to android 5.1.

  I'm sitting with the Tablet approximately 500mm away from my wireless router and the Tablet tells me that I have an excellent connection?

  My tablets wireless keeps dropping out all the time and becomes unusable!

  Y at - it a fix for this please?

  If this isn't the case, I plan to return this POS to the retailer tomorrow for a full refund.

  Please look at the other threads in this forum for more information on how to DOWNGRADE this tablet to firmware android stock 4.4, which is the only solution that I know and believe me, I looked.

  I bought two of these (A10 - 70L) and I loved the tablet. I, like you, made the mistake of "redevelopment" this 5 Android and it became a useless piece of rubbish crap. WiFi drop out every few minutes is just totally unacceptable and there are also other problems.

  I've learned how to stock firmware downgrade. After first make the mistake of doing it with a 10 - 70F firmware (version non - 4 G) I finally got the firmware 10-70L stock on it, so I've updated all of the updates from 4.4 and am root (kingroot) and just be deleted the Lenovo update tool ensuring that he'll never 'upgrade', once again and now it works perfectly.

  My advice: take the time to learn how it down because it is (in my opinion) a great device with 4.4.

  What I find quite unaccelable, is this problem of WIFI-drops-all-the-time-after-upgrade was reported here and in other forums on the right after the 'upgrade' have become available and there is STILL no solution for it. It's not as if Lenovo does not know about it. It is also quite rude to their customer 'support' to say ' well, it's not our problem you installed our upgrade and ruined your tablet. Maybe they're not legally responsible in China or somewhere like that, but here in the EU that they are clear.

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• Tab 2 A10 - App icon missing

  A tab 2 A10 bought it recently but it took over and replaced him on the advice of Technical Support. Now more questions.

  The first has a little button in the bottom toolbar that showed all the applications available. It doesn't have the same available button so I have to turn to page to see what's there. Ask yourself if there is in this tablet or simply what is displayed on the pages of other applications? In the other, with the apps key, all that are shown on the "bonded" pages for use. Do not have this choice, to view all available applications (if any) there could be in the tablet. Suggestions?

  Thanks for any help. New Android tablet, so be patient.

  FFP

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Do not take into account. Do you have a factory reset, several updates installed, working all right now.

• Tab 2 A10-70 - glued hourly language/time zone screen

  turned on my tab 2 A10-70 for the first time - it shows the screen of "set the language and time zone, but I do nothing that do accept the choice that I have selected.

  The only thing that looks like a button is the small blue dot at the bottom, but nothing happens, no matter where I touch or swipe.

  It allows me to change the language and time zone, and when I do, the lenovo logo down inside a little bit, but still nothing.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  have you seen the arrow in the lower right on this box? It is small enough

• Converter USB-Ethernet Lenovo's tab 2 A10 - 70F

  Hello

  I had the tablet a few days ago and I want to connect it with my router via a LAN cable using a microUSB-Ethernet Converter. Can anyone recommend such a converter, knowing that it works with tab 2 A10 - 50F?

  THX in advance,

  Michael

  So, it's me, again

  I've updated my tablet with works of A10-70F_S000120_150907_ROW_TO_A10-70F_S00121_151222_ROW and everythings, WiFi ok, its ok and my Ethernet connection via USB works also! The latter was a Kitkat 4.4.4. issue.

• Start Windows Vista or graphics card problem problem

  OK have a problem with Windows Vista here. Its pc of my grandmothers, only a year or two. (office) My brother went in safe mode and came back with a restore point. He said it worked, but now, the screen goes black trying to open windows.

  What's happening...
  It starts showing the status of the drives and ram memory and asks me if I want to install through F10 (which works) then it goes to the "Windows was extinguished not correctly." And it gives the offer of
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Normal windows startup
  The security mode through the long load upward and then a black screen and an arrow of big white mouse I can move.
  Normal windows opens with the quick bar Windows... then nothing. Just a black screen and a white mouse arrow. Of Cntrl Alt Del does nothing and only thing that makes something happen hit SHIFT 5 times. It causes a beep and a window opens asking if I want to use StickyKeys. Other then that I had nothing.
  I'll try to find a Windows Vista dvd to repair.
  Part of me wonders if it is a screwing display driver. As I said some stuff shows up to save for windows, so it's a small chance, but to think what anyone.
  Care,
  Windows Vista Edition home premium
  HP Pavilion p6110t

  Hello

  If you start Windows, see a desk white or black with no icons, video card problems are the most common cause of this problem.

  Try the following troubleshooting steps:

  Method 1: Access your computer and reinstall your current video driver

  Uninstall your video driver and allow Windows to re - install:

  1. click on start and type device manager in the search box

  2. click on device under Programs Manager

  3. Select the video driver and uninstall

  4 restart your computer to allow Windows to reinstall the driver

  Note: Once the driver is reinstalled, you may need to restart your computer to complete the installation. In addition, you will also need to adjust the resolution of the display to its previous value.

  Method 2: Turn on the video resolution (640 x 480) and then update your video card driver

  If the resolution of the registry problems does not work, perform the following steps to activate the video resolution:

  1. Click the Start button, click the arrow next to Shut Down and then click on restart.
  2. Press F8 before the Windows logo appears.
  3. In the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.
  4. Log your computer with a user account with administrator rights.

  If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information,.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Start your computer in Mode safe mode and disable your video card

  If activation low resolution and then update your video card driver do not work, perform the following troubleshooting steps to disable your video card driver:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  When your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 5: If these steps do not resolve your problem, try to boot mode safe again and follow the steps in the system restore to restore your computer to an earlier point in time.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Note: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  If this still does not have the problem, contact your computer manufacturer or the technical support for further assistance.

  It will be useful.

• Card problem multimedia blackBerry Z3

  I use my media card in BlackBerry z3 and he said that it could solve media card problems summary abd will be quickly deleted what I can do

  I have format my card many times but the problem occurs again and again that I have to change my card while this problem reoccur

• Screen flashes different colors and freezes at the same time, there is a video card problem?

  When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
  Any help would be greatly appreciated.

  EDIT: I forgot to mention that it is a HP G62 laptop.

  Hello

  Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

  Let me know if this helps you.

  Kind regards

  BearPup

• Then the tab 2 A10-70 Lenovo run all creative Cloud applications?

  Hi, I take a few beginner courses graphic design and I have a small budget, but I need a computer or a tablet that will run the creative cloud apps. I was really interested in the Lenovo tab 2 A10-70, but I don't know if he can run all the applications. Any help would be appreciated. Thank you very much.

  It runs the Android operating system, so you cannot run any desktop applications such as Photoshop or Illustrator on it.

  It will operate the mobile applications such as Photoshop Mix cloud and Photoshop Fix, sketch of Photoshop and Illustrator to draw.

  Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

• HP 7 voice tab: the SD card problem

  I have HP 7 voice tab. I get the problem with the transfer of the apps from the internal memory to the SD card. How can I do that. Please notify

  Hello and welcome to the HP support community!

  Google has changed the way Android KitKat accesses the SD cards.  Applications may not be transferred.

  Maybe this article can help to explain the evolution of Google Android KitKat 4.4:

  KitKat and SD - what is fixed, what's broken and what is misunderstood.

  WyreNut

• ext4 and SD - tab 2 A10 - 70F cards

  Although the android root file system is ext4 tab 2 seems to be able to use a fat32 formatted miniSD card.

  1. is there a way so he can use the formats of ext4, f2fs, exfat, ntfs file without rooting?

  2. If I root, what is the best way (s) to obtain the support of ext4, f2fs or exfat/ntfs?

  Here's how you get exFAT and NTFS support.

• Satellite P100-195 - loud beep sound card problem

  Hi guys.

  I bought a Toshiba Satellite P100-195, about two weeks ago and since I had a problem with my sound card I do not seem to be able to overcome. Whenever I have to increase/decrease the volume (or audio icon in the system tray or the control panel) I get a loud beep after I let go of the mouse button.

  The sound seems to work fine, but the tone is getting stronger every time I increase the volume and is really annoying. I also noticed that whenever I got an audio/video conversion Canopus Procoder 2 I get the same tone, even if the converted files are well and plays well. My Satellite P100-195 was a Portuguese Windows Professional MCE.

  The beep will be like a BIOS we and not a BONE.
  I already reinstalled the audio driver.
  Can someone help me with this?

  Jose Felix

  Hello

  Is - this loud beep appear on a fresh install that BONES form the Toshiba Recovery CD?

  The second possibility is that your operating system has put this loud beep as a program event.
  Go to sound and audio devices and select the Audio tab.

  Here, you can see all your sounds that are set on the different program events.