Tab panels act as accordion
Hi all.
What I try to achieve is to have a panel with tabs or accordion panels is another.
That is to say. When you have a section of the menu with group names what ever and when you click on one of the previous panels panels closes automatically and how ever big the current Panel is it narrows and opens the page and when the new Panel is open, how ever did a big pushes down on the page making it longer or shorter depending on the content.
Thank you
Please allow the components to overlap below if you don't want content to move below.
Thank you
Sanjit
Tags: Adobe Muse
Similar Questions
-
I use Dreamweaver CS6
I use panels to Spry tab and would add two tabs. In the property page, I use signs + to add the second tab.
I will quote the tab, then I click on split to see what I did. I noticed there are 2 content that appears, but when I go back to see
the properties page, under boards, I see the first tab indicating the name, it should be, the second tab shows the following: < lack the content panel >
If I go to split view and look at the code, I see this:
< div id = "apDiv9" >
< div id = "TabbedPanels2" class = "TabbedPanels" >
< ul class = "TabbedPanelsTabGroup" >
< class li = "TabbedPanelsTab" tabindex = "0" > PayStation < /li >
< class li = "TabbedPanelsTab" tabindex = "0" > < /li > IP settings
< /ul >
< div class = "TabbedPanelsContentGroup" >
< div class = "TabbedPanelsContent" > < br / >
< br / >
PayStation is the first tab
Settings IP is the second tab
I don't understand why it says missing content panel?
Thank you
Neil
Hi Nancy,.
All errors are gone now:
Unfortunately, the table is still outside the area of the tab?
Neil
-
How to adjust the height of the tab panel
I'll have six tab in the tab of the Panel only an accordion panel. I'm doing for my project and so please answer me fast ASAP
Hello
By increasing the height of the tabs Panel do you mean increasing the height of the "content area" or the height of the container "tab"?
In both cases, please refer to these screenshots:- http://prntscr.com/4lopan http://prntscr.com/4lopi5
Kind regards
Rohit Nair
-
Tabbed panels: you can set them to "close all"?
I loaded a panel tabs on my web page but cannot find a way of them have closed at the same time, as you can with accordion panels.
Y at - it a setting I forget?
Thank you, community Muse!
No, you can't close all tabs because that's not the way of work tabs, but if you think outside the box, or in this case, outside the tabs you can use a widget Accordion with one article and put it to close. Then inside the Panel adds your tabs Panel.
Using styles, so that you can then style your accordion tab be invisible, but have some text in the accordiaon tab to open and close.
-
How to link to a specific spry in Adobe Dreamweaver CM³ tabs Panel?
Hi all
I have a homepage using panels to Spry tab with 6 panels. I want you assign a URL that is unique to each panel so that I can link directly to each tab to other pages in the Web site.
I found this question asked and answered for previous versions of Dreamweaver. Dreamweaver CC now (starting August 2012) use widgets to jQuery UI for panels with tabs, so I think it's why I'm not having much success with solutions that are already out there.
Please note that I am relatively new to the web languages and Web site design.
I also created a version that shows how a link to a specific panel or a tab in a tab or jQuery UI accordion: http://foundationphp.com/tutorials/jqui_specific.php.
-
Color of the tab of the selected tab panel
Hi all
I would like to know the orange as the color of the upper part of a tab in the tab panel, see the image below.
In fact, these are two colors, orange and orange dark, 'shadow '. I don't mind what color value, I can get, but I would like to use the same color for the other controls (LED, part of decoration) as well.
This color depends on the theme of Windows? If so, I would be happy about a possibility of getting this property programmatically.
If the color is still the same, I can get it myself using Photoshop...
Thank you very much
Wolfgang
When the Panel has ATTR_CONFORM_TO_SYSTEM_THEME game, ICB allows Windows to draw the tabs by calling DrawThemeBackground with partIDs TABP_TABITEM, etc. The image you posted is the XP theme. The theme of Windows 7 is different, and it looks like this...
I checked the GetSysColor Windows function, but didn't see a way to get that color. Anyway, since the tabs draw differently on XP and Vista/Windows 7, you can not use this color in the different controls.
-
How to insert HTML custom in tabbed panels Widget
I need to insert HTML in a tab panel Widget.
I have an HTML table with the data that I have to put in a tab panel Widget.
I tried to create the custom HTML and dragging it in the area of the tabs Panel that did not work.
I tried the content area of the Panel tabs, then click to insert custom HTML that has not worked.And now, I'm of ideas on how to achieve this.
Thanks in advance
Ho!
So I thought about it for me.
If you are wanting to insert HTML custom in a tab panel, make sure that you have selected an object in the content area of the Panel tabs. Then select Insert HTML code.
I have just placed a text box in the tabs Panel, selected the text box so that it is highlighted and then chose to insert custom HTML.
This put my HTML custom code in the content area of Panel tabs.
-
Hello.
How can I add multiple tabs for the default tabbed panel widget...
Basically, using the "bootstrap" structure, I added a tabbed panel widget that has a default 3, however an is a 'drop-down Menu"style that I delete.
Leaving me with only 2 tabs.
How can I add more.
Thank you in advance.
Glen Gibbs
You will have to switch to Code view and change some coding. Take a look at what follows is what you get when you include the standard tabs widget. Then remove the red color elements, they belong to the tab from the drop-down list.
Content in the tab of the Panel 1
Content 2
Content drop-down list #1
Content drop-down list #2
This leaves us with
Content in the tab of the Panel 1
Content 2
Copy the 2 remaining Tabs, color green and past them immediately under the copied lines. Do the same with content, blue color. This will result in the following code. Remove the red color code and change the orange color code while they in the same sequence as the original code.
Content in the tab of the Panel 1
Content 2
Content in the tab of the Panel 1
Content 2
Your code over for the four legs will look like
- Tab 3
- Tab 4
-
Can you make a tab in a tab panel trigger a title change located above the tabs?
My client requires the title up above change when you click on each of the different tabs. How do I do that? Here is a link to the site I'm doing:
I ended up working around this problem by removing the tabs Panel and using a menu linking to different pages in its place.
-
I created a tab panel and applied some styles to tabs. (Drop shadow and change the stacking order so that each tab casts a shadow on that below.) Now everytime the page loads, it will default to the lower tab. The only suggestion that I've seen is to save and load the site with the desired tab is selected and 'active'. This does not seem to solve the problem.
Hmmm, have you looked into this widget from MuseGrid? It looks like roughly what it takes for this?
-
HTML shows on all panels in tabbed panels widget
I'm trying to insert HTML in a specific panel on a tabbed panels widget, I have set up. I have done this before, but now whenever I try, the HTML code displayed on each Panel instead of the one specific one I selected. Note, I was able to achieve previously with ease. Here is a sample of the HTML, I'm trying to use, and has been able to use successfully on a separate tab with a name different iframe.
"< iframe name ="iframe2' src = message.html "width ="500"height ="300"> < / iframe >
Strange!, please publish the site as a place for Business Catalyst trial and give us the link.
If the content is different for each tab, then they should not show same content unless the code inserted is not correct.
Thank you
Sanjit
-
How to customize the tabs in tabbed panels widget... ?
I have four tabs in a tab panel widget and I want the color of the active tabs are different. For example: when the tab it is active, it is blue, when two tab is active, it is red, tab in Active mode three is yellow - and so on...
Is this possible? And if yes: how?
It seems that if I change the 'active' color on a tab, it effects all tabs. I also tried to use an image on one of the tabs in the 'active' mode - and the image is apparently used for all other tabs.
You can do it by uncheck edit together in the Panel options. You can do it anytime, so you can standardize the text, for example, and then uncheck the box to change the colors of the tabs themselves.
David
-
URL to the tabs in the tabs Panel
Hello!
How can I add a url to the tabs Panel tabs? I want to do a runway the maon menu link to different tabs.
Thank you!
Hello
Take a look at this topic, may be similar,
-
I created a block of news recommended under a tab panel,
I created a block of news recommended under a tab panel,
How and where can I change my news recommended from one tab to the other?
Hello
You can change the information using Inbrowser edition. For example, if you are using Business catalyst as a host, then take a look at the image below
Please let me know if you have any other question.
-
Help please with tabbed panels
Hello
Is someone can you please tell me how I can change the color of the background of the tabs of tabbed panels. They are gray and I can go to each tab and set a new color and when this tab is selected, the new color shows, but when I click on the tab of the next panel, the background of a previous dates back to gray. How can I get this gray background color just changed?
Confused everybody, because I think I'm confused me lol
Thanks if you can help!
Kathleen
review the status of each tab for example. normal, rollover, the mouse toward the low and active.
Content in the tab of the Panel 1
Content 2
Content on the dashboard 3 tab
4 content
Maybe you are looking for
-
HP laptop 15-5001na: MY HP laptop 15-5001NA STOPS AFTER 1-2 MINUTES
When I load my computer after 1 to 2 minutes only turns off
-
Is there a function of block selection in the editor of CVI?
I am a newbie of the CVI and familiarize themselves with the environment. One thing I did find is still a function of block selection. Can someone help me on this? I'm looking for something similar to, say, Alt-do drag in MS Word. Thank you.
-
Lenovo g550 20023 HDD SATA port type of model?
Hello I want to change my HARD drive, because it is broken and I need more info on my laptop Lenovo SATA port (G550 model 20023). I need to know if it is of type 1 SATA / SATA-150 or so is SATA II / SATA-300. Also please tell me if it is possible to
-
How can I return my T5i factory settings?
How can I return my T5i factory settings? I have problems with flash and counting and thinking, I may have inadvertently changed a setting. Appreciate any help. Thank you
-
After having modernised with cervice pack3 my wil-Windows Xp Home Edition is no longer turn off the computer when I try to stop. It stops after "now closing windows" then I have to unplug the power to get the thing altogether.