Tab problem ESXi 4.1 material

Similar Questions

• SE instala don't sin problema esxi 5.1 pero no starts

  Is, ojala me can help, I have a server ibm x 3500 m3, el cual tiene 2 discos duros con cada uno, the he dejado 600 GB sas las cofiguraciones por defecto al server without the he have changed, nada.

  Al instalar el esxi 5.1 lo instala sin problemas, al end the instalacion y pedir reiniciar el equipo lo hago y el equipo no starts.

  Como as no encuentra none particion boteable.

  Buscando en internet veo me dicen as tengo Québec poner in el en el bios not boot order, legacy primero, pero in el server no tengo EST opcion.

  In el news materials compatible if server entonces mi appears not to as por hacer para as instalar h. luego y can iniciar el esxi are.

  I hope can help me

  Esto is debe has the discos LSI, habitualmente una M1015 o M5015 controladora

  In notes las Técnicas IBM you comenta este paso como prerequisito en the door material del para the instalacion.

  http://www-947.IBM.com/support/entry/portal/docDisplay?lndocid=MIGR-5085368

  Te lo Le también por experiencia propia.

  Esta config're igual en HS22, X 3650 M2/M3, X 3550 M2/M3, por ej

  Espero haber sido ayuda.

  Saludos,

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave

• 3.6.7 tab problem

  Question

  I have another type of problem with Firefox

  Description

  My browser is automatically updated to version 3.6.7. After this update, I am not able to switch between the tabs by clicking on them. I can close any tab, I wish, but it is a major disadvantage of having to close a tab, I want to continue browsing.

  This has happened

  Each time Firefox opened

  update to version 3.6.7

  Troubleshooting information

    Application Basics
          Name         Firefox
          Version         3.6.7
          Profile Directory
            Open Containing Folder
          Installed Plugins
            about:plugins
          Build Configuration
            about:buildconfig
  

    Extensions
          Name
          Version
          Enabled
          ID
          Java Console         6.0.07         true
          Java Console         6.0.18         true
          Skype extension for Firefox         4.2.0.5198         true
          InvisibleHand         2.4         true         [email protected]
          DownloadHelper         4.7.4         true
          Glue         4.5.21         false
          Java Console         6.0.20         true
          HP Smart Web Printing         4.51         true         [email protected]
          FacePAD: Facebook Photo Album Downloader         0.7.4         true         [email protected]
          TinEye Reverse Image Search         1.0         true         [email protected]
          Minimap Addon         0.3.13         true         {398e77b8-2304-11dc-8314-0800200c9a66}
          FoxTab         1.3         true
          Element Properties         6         true         [email protected]
          Yahoo! Toolbar         2.1.1.20091029021655         true         {635abd67-4fe9-1b23-4f01-e679fa7484c1}
  

    Modified Preferences
        Name
        Value
          accessibility.typeaheadfind.flashBar         0
          browser.places.importBookmarksHTML         false
          browser.places.smartBookmarksVersion         2
          browser.startup.homepage         http://www.google.com/ig
          browser.startup.homepage_override.mstone         rv:1.9.2.7
          dom.max_script_run_time         1800
          extensions.lastAppVersion         3.6.7
          network.cookie.prefsMigrated         true
          places.last_vacuum         1279464609
          print.print_printer         Lexmark 3500-4500 Series
          print.printer_Lexmark_3500-4500_Series.print_bgcolor         false
          print.printer_Lexmark_3500-4500_Series.print_bgimages         false
          print.printer_Lexmark_3500-4500_Series.print_command
          print.printer_Lexmark_3500-4500_Series.print_downloadfonts         false
          print.printer_Lexmark_3500-4500_Series.print_edge_bottom         0
          print.printer_Lexmark_3500-4500_Series.print_edge_left         0
          print.printer_Lexmark_3500-4500_Series.print_edge_right         0
          print.printer_Lexmark_3500-4500_Series.print_edge_top         0
          print.printer_Lexmark_3500-4500_Series.print_evenpages         true
          print.printer_Lexmark_3500-4500_Series.print_footercenter
          print.printer_Lexmark_3500-4500_Series.print_footerleft         &PT
          print.printer_Lexmark_3500-4500_Series.print_footerright         &D
          print.printer_Lexmark_3500-4500_Series.print_headercenter
          print.printer_Lexmark_3500-4500_Series.print_headerleft         &T
          print.printer_Lexmark_3500-4500_Series.print_headerright         &U
          print.printer_Lexmark_3500-4500_Series.print_in_color         true
          print.printer_Lexmark_3500-4500_Series.print_margin_bottom         0.5
          print.printer_Lexmark_3500-4500_Series.print_margin_left         0.5
          print.printer_Lexmark_3500-4500_Series.print_margin_right         0.5
          print.printer_Lexmark_3500-4500_Series.print_margin_top         0.5
          print.printer_Lexmark_3500-4500_Series.print_oddpages         true
          print.printer_Lexmark_3500-4500_Series.print_orientation         0
          print.printer_Lexmark_3500-4500_Series.print_pagedelay         500
          print.printer_Lexmark_3500-4500_Series.print_paper_data         1
          print.printer_Lexmark_3500-4500_Series.print_paper_height         11.00
          print.printer_Lexmark_3500-4500_Series.print_paper_size_type         0
          print.printer_Lexmark_3500-4500_Series.print_paper_size_unit         0
          print.printer_Lexmark_3500-4500_Series.print_paper_width         8.50
          print.printer_Lexmark_3500-4500_Series.print_reversed         false
          print.printer_Lexmark_3500-4500_Series.print_scaling         1.00
          print.printer_Lexmark_3500-4500_Series.print_shrink_to_fit         true
          print.printer_Lexmark_3500-4500_Series.print_to_file         false
          print.printer_Lexmark_3500-4500_Series.print_unwriteable_margin_bottom         0
          print.printer_Lexmark_3500-4500_Series.print_unwriteable_margin_left         0
          print.printer_Lexmark_3500-4500_Series.print_unwriteable_margin_right         0
          print.printer_Lexmark_3500-4500_Series.print_unwriteable_margin_top         0
          privacy.cpd.siteSettings         true
          privacy.sanitize.migrateFx3Prefs         true
          privacy.sanitize.timeSpan         0
          security.warn_viewing_mixed         false
  

  Version of Firefox

  3.6.7

  Operating system

  Windows 7

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; RV:1.9.2.7) Gecko/20100713 Firefox/3.6.7

  Plugins installed

  • -nphpclipbook
  • Office Plugin for Netscape Navigator
  • NP-mswmp
  • Adobe PDF plugin for Firefox and Netscape
  • The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Default plugin
  • Provides additional features on Facebook. See our website for more details.
  • The Plugin of the Hulu Desktop allows Hulu.com to integrate with the Hulu Desktop application.
  • Google update
  • Shockwave Flash 10.1 r53
  • Adobe Shockwave for Director Netscape plug-in, version 11.5
  • iTunes plugin detector
  • Plugin Yahoo Application State version 1.0.0.7
  • 3.0.40624.0
  • NPWLPG
  • Next-generation Java plug-in 1.6.0_20 for Mozilla browsers

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  • If you have many extensions then you first activate half test extensions that half the problem. Continue to divide the bad half that still has the question until you find that one is causing it.

• El Capitan Finder tabs problem

  Hi all

  after update from my MacBook Pro to El Capitan, I have some problems with the Finder tabs (in Yosemite, it worked well!).

  Every time I "close" Finder with close button (red x) I lose all open tabs. So next time Finder opens as 'default' without tabs, I opened the previous session.

  I unchecked "Close windows when you exit an application" in preferences/General.

  Thank you for your comments.

  MFrella

  I tried it on my own system, also running El Capitan - I opened three tabs in the Finder, then clicked on the button the left most in the upper left to close.  I then clicked on the icon from the Finder in my dock to reopen it, and a window with the same three tabs I had open previously.  I don't know why it does not work for you.  :-\

• secondary tab problem: cannot click on buttons

  Im running VI in sub-panels, and I have those in separate tabs.

  For some reason I can't click on the buttons when the secondary is placed inside the tab - VI runs correctly.

  When I place the school outside the tab, it works fine. I'm probably on a frame, which knows what to do?

  Thank you

  Maybe I should mention that the tabs are configured on the 'content' tab and the buttons are highlighted when mousing over but I can't click anything.

  OK problem solved, it was caused by sloppy programming:

  I have buttons which allow to select tab (5 of them). An event for a button click sets the visibility of the page for all the tabs off, except the one selected. And here is my fault:

  I just put all these nodes property incident, forcing them to run in no particular order. So that the tab in the right tab, it has caused for some reason do not work properly.

  With the help of the error of the son first activate the visible page (pagevis property node) that is selected. Then do the rest invisible and finally using the property node 'value of tab control' tab on the page in the order makes it work like a charm.

  Do not hesitate to call me an asshole

• Theme Builder OS6 MEDIA tab problem. Help, please

  Hello my fellow developers!

  I have been looking for a solution for this problem and simply can not come good!

  Is attached a picture of my problem.

  

  I use the latest version of Theme Builder (V6) when designing for OS 6 icons specifically the Curve 9300, but others have had the same problem with the Bold 97xx... I save and export the theme on my phone, directly by the program or download and install OTA, the MEDIA TAB slider appears NOT all icons, all the other tabs as 'Downloads', 'Favorites', 'Frequent' and 'All' display icons correctly.

  Someone would help me please in this regard?

  I really enjoy it and do my very special Christmas!

  Thanks in advance

  I found the solution, if anyone wants to know, click on my site and look under the FAQ section... Enjoy!

• Network problem ESXI on reviews of CentOS 5.5

  We have dedicated node in HP ProLiant DL120 G7 (ONLINE.NET datacenter in France) with installation 5.5 ESXI and vSphere Clent. In the data store, we have the ISO for CentOS 5 and 6 files in order to create VM customers for the web server application.

  vSphere Client creates the VM on the dedicated node successfully, but we have a problem with the networking, guests of virtual computer cannot access the internet. Settings for the virtual machine networking vSphere client a VMXNET3 adapter with edited manually (provided data center virtual MAC) MAC address and default VM network as network connection option.

  Inside of the virtual machine comments (CentOS 6 minimum), that we have tried to install/etc/sysconfig/network-scripts/ifcfg-eth0 and/etc/sysconfig/network-scripts/route-eth0 according to the tutorial https://documentation.online.NET/en/serveur-dedie/Systemes-d_exploitation/vmware_vsphere_hypervisor_esxi_english

  but still cannot ping external container.

  We have an IP address main and tipping 5 IPs with virutal MAC addresses.

  How to set up the connection?

  Problem solved!

  Here's a solution:

  / etc/sysconfig/network-scripts/ifcfg-eth0

  should have:

  DEVICE = eth0

  BOOTPROTO = none

  ONBOOT = yes

  USERCTL = no

  IPV6INIT = no

  PEERDNS = yes

  TYPE = Ethernet

  NETMASK = 255.255.255.255

  IPADDR #Replace with your IP address

  IPADDR = 195.154. *. *

  #Replace GATEWAY with your GATEWAY IP address

  GATEWAY = 195.154. *. *

  DNS1 = 8.8.8.8

  ARP = yes

  ARPCHECK = no

• DBMS output tab problem

  Hello

  I use SQL Developer 4.0.1.14 and I noticed that I can't switch tabs in the window output-DBMS. The last open tab is always selected.

  I uploaded a screenshot here

  http://imgur.com/hT7wUSp

  In the lower right window, it is not possible to switch between the 2 open connections to DBMS output.

  Anyone can test this problem? Thank you.

  Yuck, definitely a bug. Logging now.

• iSCSI storage problem ESXi 5 u1

  Hello

  We have six ESXi 5 u1 servers connected to the storage unit Dell EqualLogic 65xx series. On ESXi systems we use the iSCSI Software and PSP is set to RoundRobin. We investigated a question where randomly throughout the day that we receive the following warning:

  VCenter:

  Failed to write command to write-suspended partition naa.6090a08890b27eeab8cee499fb01a0f6:1

  VMKernel:

  WARNING: ScsiDeviceIO: 3075: order of writing-suspended bulkhead 6090a08890b27eeab8cee499fb01a0f6:1 write failure

  Capability3: 13359: Max (10) attempts exceeded for appellant Fil3_FileIO (status "IO has been abandoned by VMFS via virt-reset of the unit")

  BC: 1858: cannot write (couriers) object '. iormstats.SF': level core exceeded Maximum attempts

  Also, we see a lot of messages indicating a loss of connectivity, iSCSI volumes:

  Lost access to the volume (LUN_NAME) 4f58ac5f-ef525322-XXXXXXXXXXXXXXX because of connectivity issues. Recovery attempt is underway and the result will be
  reported in no time.

  This event is generated by all six guests at random time intervals and LUN iSCSI target different. At the same time, we notice a very high spike in CPU usage of 100% on the host that generates the message

  One thing we found through tests of vmkping is that ESXi hosts are configured for extended frames (9000 MTU vmk, vswitch and adapters), but the storage network, does not allow frames.

  This could be an indication of serious IP fragmentation on iSCSI? How we measure this?

  conraddel wrote:

  One thing we found through tests of vmkping is that ESXi hosts are configured for extended frames (9000 MTU vmk, vswitch and adapters), but the storage network, does not allow frames.

  This could be an indication of serious IP fragmentation on iSCSI? How we measure this?

  Do you know if the side SAN is configured for frames? If not, then it should probably not be a problem, given that the TCP connection will take care of the other so-called MSS sizes and your guests should get off by default the images of sizes.

  The worst situation would be if both the ESXi and the SAN supports jumbo frames, but not the switches between the two. Because the switches are 'invisible' problems don't happen, until you actually start sending larger images and those will arrive in silence by switches, i.e. no IP fragmentation.

  Have you also checked with vmkping what kind of end-to-end connectivity, you have? Options-d and s are very important get right: http://rickardnobel.se/archives/992

• Conversion of VMware ESXi server - even material?

  The best practical Suggestions needed to convert virtual machines on VMware Server ESXi using the same material.

  We were real happy with VMware Server 1.0 x, but want to take advantage of the features in ESXi 3.5 and get rid of Windows as the OS boot.  VMware Converter would work well if I had a standby server (which I did not.)

  I have a Dell Latitude D830 w/4 GB of RAM, 160 GB drive HARD internal 500 GB USB external disk HARD Windows XP SP2 w/VMware Workstation 6 available as a new Mac laptop similar hardware config Fusion running.

  I think I could use one of the laptops to run ESXi as a virtual guest, VMware Workstation or Fusion, then convert machine virtual de VMware server here.  Once those who are converted can I fdisk VMware server box, install ESXi and simply move the virtual guests converted from the laptop to the ESXi box.

  Am I anywhere near or are there any other suggestions to achieve this?

  TIA

  Gary

  garyrm,

  Welcome to the VMware Community Forums!

  I think I could use a laptop to run ESXi as guest virtual VMware Workstation or Fusion, and then convert the virtual de VMware server machine it

  ESXi shouldn't be not installed as a guest operating system.  One, he is not taken in charge and two, it is CATASTROPHIC in BAD PERFORMANCE.

  If you:

  1. turn off the virtual machines in vmware server 1.0

  2 copy and paste somewhere (usb/network drive on your laptop)

  3. install ESXi

  4. use the converter to the image of stand alone.

  that should work just fine.

  Kind regards

  EvilOne

  1 - verification of documents

  2 - search the forums

  3 - Question post

  And don't forget to award points to those who help you.

  Post edited by: IamTHEvilONE - I forgot a negative on should not

• command - tab problem

  Hello

  On El Capitan with a Macbook 12 "machine, the control function + tab doesn't work correctly (as work for example on my old desktop iMac with El Capitan...)

  What happens is that when I try to switch to a different application, by using the command - tab, the application becomes active, but without having to open the appropriate window: basically, nothing happens, only the application menu appears in the tab order. This makes it really unnecessary the whole order - function tab.

  Does anyone have an idea why this happens and how to fix it?

  See you soon,.

  Daniele

  Try restarting your Mac.

• Slate HP 6 voice tab: Slate from HP 6 voice tab problem

  I have HP slate 6 voices TAB 6002en and I try to install update.zip ADB and after that I send the file (update.zip) to the device, it check the file and restart with for 3 sec and then hp logo android logo device with point 3 of them white for 20 seconds and then restart and fail.

  any solution please?

  Hello and welcome to the HP support community!

  Have you tried according to HP for the restoration of your device (using a SD card)?

  Restoration of a 6 slate or slate Voicetab 7.

  WyreNut

• There was a problem installing this card material Ralink Turbo wireless LAN, that an error occurred during the installation of the device. The system cannot find the specified file.

  Opus system Windows XP Edition SP3 eddition family

  I tried to install two NICs - Netgear RangeMax Wireless - N USB 2.0 adapt WN111v2 and PCI Ralink Startech 555WG 801,11 g Wireless PCI Adapter Card. In both applications on the end of the installation I received the message that installation failed.

  I downloaded all the latest drivers, disabled antiwirus program and firewall, I called the software factory. Nothink helped. Everything is pointing to problem windows install the drivers.

  For installation of Netgear USB wireless adapter WN111v2 - after installing software you plug wirelles adapter to the USB port and start the final driver configuration. After that I get message "installation of the client software has failed. Restart your computer and run Setup again.

  Can you help me?

  Hello
  
  Step 1: Adding to the suggestion of A70M1C, you can also check if the problem persists in the clean boot state.
  Reference: http://support.microsoft.com/kb/310353
  
  

  Step 2: Also check if you can find any error message in the event viewer and send back the same.

  Reference:
  http://support.Microsoft.com/kb/308427
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problems with DVD/CD material

  Hello

  Thought I'd start here and go from there... my wife has a laptop computer that has problems with the DVD/CD player and unable to operate, despite attempts on and off the internet... hours thinking maybe there is a problem with the hardware itself... anyway... she used the player very little anyway and I was wondering what would be the best method of copying a cd bootable on a drive Flash and I can use the USB port to install any CD of this nature... a method that might work with all windows...

  Larry Wöller

  A popular easy utility to use for making a bootable USB key is Rufus. It can also be done with some steps more natively.

  If you don't want to address the problem of the laptop's optical drive, you can also consider getting an external drive.  For example, http://www.newegg.com/Product/Product.aspx?Item=N82E16827136266

  Rufus 1.4.6 build 440

  http://www.Softpedia.com/get/system/boot-manager-disk/Rufus.shtml

  Manual process explained

  Create a USB Bootable Flash drive

  http://TechNet.Microsoft.com/en-us/library/jj200124.aspx