Table compensation after start/stop

Similar Questions

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Toshiba laptop start registry error after manual stop

  original title: Toshiba laptop start registry error after manual stop - HELP!

  Hello, I have a Toshiba laptop with Windows Vista.  Yesterday it froze completely upward and I had to manually close (hold the power button until stop you him) twice.  The second time when I tried to restart the came Toshiba screen, then the screen with the little scroll down bar, and then it went black, waited for a while, then flashes a bluescreen with a written up VERY quickly and cycles back to the Toshiba screen.  This time after the scroll bar it gives me white saying the writing system could not restart, and I want to start normally or startup repair. If I restart it through loading files, trying to fix it and said then he wasn't able to fix it and when I look at the details there something on a registry error.

  I really need to solve this problem quickly and desperately want to save all my files if possible because it's our main Mobile family that has all our digital photos on it and they are not saved. (I know, terrible of us).  Can someone help me?

  Thank you

  Charity

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• After starting either sleepmode or hibernation, if I don't do anything it stops. How can I change the length of time before this?

  Basically, it's one of those things "If you have accidentally activated the computer." It is only the biggest annoyance of since I was "keep" my computer after putting out of fashion 'sleep'. I usually have a certain pages open in firefox, and it does not record the sessions (together than on purpose, adult with children here who will use it from time to time if don't want them go on Web sites for the adult audience. No, I don't speak of stage I have other security measures at the UM, front.

  If I was here a few minutes agom, and I made the model of sleep. I put on a shirt and then see that the computer went to the screen "logout".

  I expect the laser mouse usb 'start-up' (because it's not automatically, it is linked to a USB hub) and I have, like, two seconds to move it.

  I need to change the time it will stay after start/waking up without interruption to the user before it stop, or turn off the feature altogether, and I do not know is not a 'problem', i.e., it was set in vista by microsoft, no viruses/errors/whatever.

  Hello

  Well, that has a lot of adjectives but not described is not the problem as well so here's my best guess.

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Control Panel - Power Options - on left - require a password on Wakeup - do not require the value
  a password (except if you wish to do this).

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish. (Change Plan settings - Restore Defaults
  for this Plan - SAVE - then go back and set their and advanced settings as you wish.)

  I hope that answers your question.
  Rob - bicycle - Mark Twain said it is good.

• Noron 360 sometimes cannot be started on Windows 8 when starting after a stop!

  Hello

  I have a desktop computer running Norton 360 first Edition version (current) 20.4.0.44 with the latest definitions for viruses on Microsoft Windows 8 Professional with Media Center. Norton 360 , sometimes fails to start on Windows 8 , when starting after a stop.

  Since I first installed the new version of 'version-less' 2013 Norton 360 on Windows 8, it sometimes does not start at startup after a stop and did not bother to mobilize support for that matter because I thought that Symantec or Microsoft could be aware of the problem and that an update or a patch will be available soon. Norton 360 prompted me to apply a new patch today, and after applying the patch, I have realized that the amended version of the version 20.3.0.36 to version 20.4.0.44. Moreover, I also noticed that the aforesaid problem with Norton 360 persists, and if my memory is good, Norton 360 sometimes also does not start after the resumption of hibernation. I used to put the computer to sleep and I never have this issue when hybrid sleep. For Norton 360 upward and run again, I usually just give the computer a reboot.

  I believe that the function "quick start" in power options Windows 8 are originally Norton 360 sometimes fails start. I haven't noticed this problem on computers that are running Windows XP or Windows 7. If Symantec or Microsoft may arrive at a solution to this problem without having to turn off the quick start of Windows 8feature, I would be very grateful!

  Kind regards

  Arthur Durand

  Hi Doug,.

  Kindly let me know what Norton product, you try to use, and if download you the latest version of the internet, or you install a version earlier than either downloaded or a disc? Please also post the specifications of your computer and operating system incl. architecture and the edition you are running.

  Regarding your question: are you affected by the same problem that I did? Only Norton only lack of start from time to time, or Norton fails it run continuously?

  If Norton sometimes does not start on a computer that is running Microsoft Windows 8:

  Disable the "quick start" function in Windows 8 by going to the bar of charms > settings > Panel > material and audio > Power Options > Choose this as the power button , then click on change settings that are currently unavailable, uncheck the enable fast start (recommended) and click on save changes. Restart your computer to test if Norton starts up. If Norton still does not start, uninstall Norton completely, restart your computer, download and run the latest version of Norton removal tool from Symantec website, computer restartyour once more. Then download the latest version of your Norton product either downloading the trial, or you connecting to your Norton account if you have a valid subscription and clicking on the button to download next to your subscription. Install the latest version of your Norton product and manually run the direct updated until all the updates and hotfixes without restarting have been installed and no updates are available before stopping or restarting your computer!

  If Norton does not at all on a computer running Microsoft Windows 8:

  Uninstall Norton completely, restart your computer, download and run the latest version of the Norton removal tool from Symantec website, computer restartyour once more. Then download the latest version of your Norton product either downloading the trial, or you connecting to your Norton account if you have a valid subscription and clicking on the button to download next to your subscription. Install the latest version of your Norton product and manually run the direct updated until all the updates and hotfixes without restarting have been installed and no updates are available before stopping or restarting your computer!

  Please feel free to ask me more questions about, or contact me if you have problems, uninstalling, reinstalling, downloading, install the latest version of your product, Norton , or if you are having trouble updating your Norton product! I would also gladly provide via TeamViewer remote assistance, if you need my help!

  Please mark this answer as useful and/or answered if you found my answer helpful and/or my reply has answered your question!

  Kind regards

  Arthur Durand

• Error of ORA_12514 open from starting after a stop, just improved 9i to 10g

  Hello
  
  Noobe here, once again! See you soon and good new year to all!
  
  How can I modify script to start db which was extinguished before the backup?
  
  We are experiencing a problem with backups, failure is running SQL * more start after his stop. I upgraded with success our 9i and 10g, 10.2.0.5.0 on Windows server 2003, 32-bit edition. We have a back_script.bat that runs only modifications I had to make in this context were the names for the new Oracle services, but this isn't a problem. When I saw the actions in the command file, it fails to sql > startup open; action, get the error "ORA-12514 TNS:listener does not currently of service requested in connect descriptor" which is different here between 9i and 10 g that now it does not work? Commenting on the line calling our oracle_stop_start.sql I get successful > exp dumps, but it could be running process because I'm not just prior to export.
  
  I have a complete picture of the physical server running in a virtual one that I am able to test. I hope that I won't put too much info here, but here is some information! The file batch and little stop_start script date from prior to my participation.
  
  Here are the relevant passages of our backup_script.bat:
  
  SET NLS_LANG = AMERICAN_AMERICA. UTF8
  SET ORACLE_SID = wind
  
  net stop Windchill3_MethodServer (the third application for the part that uses the database of the wind)
  
  @D:\ptc\windchill\backups\oracle_stop_start 'system/manager@wind as sysdba' sqlplus
  
  owner system/manager@wind exp = file=...\oracle_backup.dmp...etc comments, etc, etc.
  
  
  This is oracle_stop_start.sql
  
  stop immediately;
  startup, open;
  quit smoking
  
  
  As stated previously, this worked at least since 2007 where recent changes have been made in the batch file. Now, it will fail to sql > startup open; throw the ORA-12514 error. I can reproduce this execution of each statement in a DOS shell. The command shutdown closed, dismounts and stops the database. I tried to change the start statement for sql > START DISCOVERED wind. but who makes no difference. I found that if I get sql * more and reconnect / nolog (in the same shell window) so I can restart the instance, what I do is:
  

  /nolog sqlplus

  sql > connect sys / * have sysdba;
  SQL > startup open the wind;
  
  This starts the Oracle instance successfully, mount and open the database. Otherwise, how would I do that? I certainly can duplicate these actions, by adding the lines necessary for oracle_start_stop.sql, but is there a better and cleaner way to do this? Right now, I just want to these existing scripts. Once this is done, then I'll study and learn more about RMAN and datapump export/import and update our backup procedures.
  
  The reflections and suggestions?
  
  Thank you
  Tom

  It may be a difference in behavior between 9i and 10g. Looks like you connect through sql * net (sqlplus "system/manager@wind as sysdba), then the parameter ORACLE_SID is not part of your connection. When the database is shutdown you are no longer connected to a database. When you issue the command to start the ORACLE_SID is not defined, so there is no specified service.

  If you run this on the database server, try setting the ORACLE_SID and then run your script like:

  {code} sqlplus ' system/manager as sysdba' @D:\ptc\windchill\backups\oracle_stop_start {code}

  and you should always have the service for your connection.

  John

• Explorer Windows Vista keeps stop / start after start.

  Message from Windows Explorer (not Internet Explorer) "Windows Explorer has stopped working"; then "Windows Explorer restarts".  Desktop icons disappear momentarily, then return and I can access the applications of the icon.  This happens more than once.  If I click Start, Control Panel, the start/stop message is in place as shown above.  I can not at all in the Panel configuration or MY computer. There is no error #.

  Hello

  ·        Since when are you facing this problem?

  ·        This occurs in safe mode?

  Follow step 1 that is mentioned below to start in safe mode.

  Step 1:

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  If this does not happen in safe mode then I suggest you perform a clean boot. Follow step 2.

  Step 2:

  It may be that a startup application causes this problem. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Step 3:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After STARTING the ESXi server stopped all VMware images...

  Hi people!

  The version of server 1 using I could mark images to start automatically with the VMware Server.

  I have not found the place to install VMware images to auto-start with the server - or which is not possible with this product.

  Best regards, Hans Holt

  Is in the configuration under Machine tab virtual start / stop

• Satellite P200 - restarts after a stop

  Hi guys

  I hope someone can help because it is driving me crazy. I have Vista 32 bit installed Premium. I have a Satellite P200 13Z laptop and when I properly close down the with Lalonde to start / stop the laptop goes through the procedure correct stop, but after about 10 seconds, it restarts.

  This only happens when the power cord is connected. When I unplug the power cable and shut down the portable computer remains off.

  Can someone shed some light on what once more makes me crackers.

  Hey Buddy,

  Have you plugged the external devices to your laptop, e. g. mouse, keyboard, USB HDD, or something else? If yes remove all these devices, they could cause these automatic starts.

  I recommend also check the BIOS. You should find an option called Wake up on LAN and it should be disabled.
  Also if you can find Wake up on keyboard disable this feature too.

• Satellite M30, screen remains sometimes almost black after start up to several minutes

  Satellite M30, WinXP

  Sometimes, the screen remains dark, which means that you can see that a little bit news startup in the background and also the Office of windows, up to 2 minutes before suddenly become really turned on.
  Not even the latest version of the BIOS has a change. And what's weird, is it still does not appear. A non stop-and-shut-down-start sequence showed that it appears about 2 to 3 times.
  What could be the reason?

  Hi LeTom,

  did you use the os recovery toshiba or a clean install?

  It seems that the display shows a fault, then here are a few questions to play safely!

  There the failure also occure when the Red Toshiba logo appears shortly after starting start?

  If you are using a clean install of the OS, you need to do a complete new installation with the Toshiba Recovery CD (attention all data will be lost, make a backup).
  Then, the laptop is set back to the default settings of the software and if the failure occurred, you should check the material by a Toshiba service partner!

  I think that the M30 is still under warranty!

  Bossi Bye

• Windows want to HP 7 freezes picture windows at startup after a stop

  HP ENVY 700-327C of office computer running windows 7.  The first image of windows freezes when starting after his stop.  Will restart after system recovery. Any ideas?

  Hello stevecnm,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your computer hangs at the Windows startup screen when it starts after a stop, and I guess you mean it starts after a repair system no recovery.

  If I am incorrect and it is the recovery of the system, then the problem you describe seems to be a physical problem and I think it would be better if you contact HP Support for service options.

  If however it is the repair of the system, I would recommend that you follow the steps I outlined below:

  Step 1. Click Start

  Step 2. Click on all programs

  Step 3. Click on accessories

  Step 4. Right click on command prompt

  Step 5. Click on run as administrator

  Step 6. Type "sfc/scannow".

  Step 7. When the scan is finished restart your computer

  If the problem is resolved, we are done.

  If the problem is not resolved, then I recommend that you look at and follow the HP Support document: backup of files (Windows 7), which will guide you through to ensure your personal files are stored. Once your personal files are backed up correctly I suggest review you and follow the HP Support document: performing a recovery of HP (Windows 7) system, that will repair your computer back to factory settings.

  If this does not solve your problem then I think it would be better if you contact HP Support for service options.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Start, stop, step chart generator

  I would like to get into the start, stop and frequency step to build a table that will contain the value of to feed to a sweep generator.

  I have something that works, except for one thing; the timeout value. I can't get this thing to stop on the stop frequency value. The step value seems to affect it too much. So could someone take a look at my vi and help me with this? In addition, the code seems a bit complex for what might seem like a simple thing to do.

  Anyway, here's a slightly simpler implementation of your code. As you can see, you the codes was much more complicated than necessary!

  Below is the implementation of the model of ramp (recommended). Both give the same result for entries healthy of mind.

  I would certainly use the ramp model, because it has the better error handling (for example if the delta is zero or maximum is + Inf, etc.).

  You can view the code to learn something.

  

  You will need to pay attention to possible accumulations of bit errors, especially with fractional steps that cannot be fully represented in binary (e.g. 0.1)

• After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop ""»

  This is windows vista business.

  After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.
  Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.

  Hello

  Try these methods.

  Method 1:

  You have to do a cold start, press and hold power for a few seconds (10).

  Wait a minute or two and turn it back on.

  Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).

  If you can, start safe mode.

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Method 2:

  Use the system restore feature:

  (a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.

  (b) on the System Restore page, click Next.

  (c) select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you encountered the problem.

  NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.

  See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

  http://support.Microsoft.com/kb/949358

  Data loss caveat:

  Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

  Method 3:

  Step 1:

  To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.

  A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287/en-us

  The following files are available for download from the Microsoft Download Center:

  Windows Vista x 86 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287

  Windows Vista x 64 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732

  Step 2:

  Save the update to a location on your hard drive, you can find and then install the update from there.

  Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.

  Disable antivirus programs and firewalls.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

  When the file is downloaded, see these steps.

  (a) right -click on the file and

  (b) select run as administrator from the menu.

  Check if it helps.

• Locking num after start-up problems

  I started just my HP Pavilion 500-106eo today with windows 8.1. The problem is, that NUMLOCK is turned off after start and restart and the bios is set correctly on and in H - key is 2 (NumLock on after starting) I tried to stop fast start upward and it didn't work either. I can manually set NumLock on after starting... Help me to solve this problem, please.

  No, it did not help to cancel the quick start to the top, but the problem was OK and log on I have some numbers in my password, and I recognized that the numbers at the top of the keyboard works in the start up, and when I connected the digital newspaper is on...