Satellite P200 - restarts after a stop

Similar Questions

• PSL40E xp restarts after a stop only on the power supply current

  Uncheck the automatically restart in the system failure section
  Disable wake up LAN
  Disable installation
  SP2 or sp3, same problem
  Install any drivers
  knowledge microsoft (Roxios Easy CD...) same problem, restart after a stop

  Bios Flash, SM bios for vista and win 7, but not for xp on page drivers toshiba...

  This occurs when the LAN cable is connected to your laptop only?

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• Satellite Pro L40 PSL4BE automatically restarts after a stop

  Hello

  I have a question where my laptop start automatically after apparently past Hibernate and shutdown by closing the lid. (I have it set so that it goes into hibernation when I close the lid.)
  The strange thing is that this only happens when it is connected to the power supply. If I close the lid when on battery, it goes into hibernation and remains closed as it should.

  It all started when I changed my power supply mode of "Balanced" to the 'Performance '. Put back to "Balanced" didn't help, and not affecting the setting the lowest. In addition, he used to come back from hibernation automatically once I opened the lid, this happens is no longer.

  I'm not sure if it is a hardware or software problem.

  This weekend I reinstalled the laptop using the recovery disks provided and applied all updates and patches for Vista, but the problem remains, so now I'm leaning more towards it being a hardware problem, even if I have no idea what kind of hardware malfunction could be the cause.

  Does anyone have an idea what might cause this behavior?

  All of these parameters are well known to me because I use the Satellite P200 with Vista. I have tested almost everything about the parameters energy saver and everything works fine. Saving energy for L40 and P200 is the same and there is no difference. Because of this I really can't imagine that there is a hardware problem.

  I hope that you understand very well that you can set this for all profiles of three in two possible situations (on battery and plugged in). What should happen when the lid is closed belongs to Vista power settings. Try it please change all of these settings in the advanced power settings.

  To be honest, I think you make a mistake.

• Satellite P200 freezes after 5-10 min and need multiple restart to work properly

  Sorry in advance for my low level in English because I'm french...

  My p200-1 has a strange problem:

  Every day when I start a new session, it works fine (the start until office) and I started working.
  After 5-10 min, windows vista (ultimate) freeze and I need to stop/restart time course and finally the success until the office.
  Sometimes I need to boot into safe mode without network and wait for 5 min office

  It seems that somewhere or a piece of the laptop must be hot to function properly (something weird maybe)

  I cleaned the air dry windows fans without improvement. I bought new memories of toshiba in france and the problem is still there. Hard drives are ok (scanned and tested)

  The warranty ends in January so...

  Does anyone have an idea?

  Thank you

  Hello!

  Have you cleaned the laptop with a jet of compressed air? This could blow the dust from the cooling fans and therefore you should not disassemble the laptop.

  I m not sure but it could also be a software problem. You have reinstalled the laptop with the Toshiba Recovery disk?
  This disc contains the settings from the factory with all the drivers and tools. And you can determine if it s a hardware or software problem.

  Good bye

• Restart after a Stop error blue screen

  I got a blue screen on my laptop Toshiba Satellite 5200 Series stop error.

  I could point out here, in its entirety, if that would be helpful. However, he begins by telling me to restart the machine, but the power button / stop device is not allowing me to turn it off.

  Should what steps I take?

  Crikey! In another forum someone told me to press the button for 5 seconds... and it worked!

• Satellite C850 restarts after shutdown - distributive fc17

  After that the team to stop the computer restarts. fc17 distribution

  Can you please send more than one sentence?
  What operating system do you use?
  Are you using the original OS that you got with your laptop?

  Have you installed any updates or anything that may be responsible for this?

• Windows 7 restarts after a stop

  Hi everyone, I have had this problem for as long as I can remember. When I would shut down Windows 7 it would end closing and then, to the point that it is supposed to stop, it restarts

  It happens all the time and I couldn't find a solution after trying many things I've seen on the Windows community forums with similar problems. I tried updating the bios, changing "PowerdownAfterShutdown' from 0 to 1 in the registry, and then 1-0, checked the event viewer and found no error message, reset the BIOS to factory settings by removing the battery for half an hour, and even after the upgrade to a brand new SSD and install Windows 7 from scratch the problem persists. This leads me to believe that it has something to do with the motherboard and BIOS; but like I said that I've already updated and even reset the BIOS and it still happens.

  System Specs:

  Intel Core 2 Quad 2.4 GHz (Q6600 B3)

  Card mother Gigabyte (GA-N650SLI-DS4)

  8 GB of RAM (4 x 2 GB DDR2)

  NVIDIA GeForce GTX graphics 760

  SSD 250 GB Samsung 840 Evo (operating system)

  Barracuda 2 TB HDD (mass storage)

  I am running Windows 7 Professional 64 bit

  Any help would be greatly appreciated!

  Hey Gordo,

  Please keep us updated on the status of the issue.

  It is possible that there is a hardware problem.

  I suggest you to contact the computer manufacturer for assistance.

  Thank you

• Satellite L305D-S5934 - after the stop, the light is always on

  I just bought a Toshiba Satellite L305D-S5934 two weeks ago.

  Here lately, I can't seem to stop completely. I select the closing down in the start menu. It seems closed down (the screen becomes black) but the power light is still, and I can hear noises inside as if it was still running.

  I am running Windows Vista.

  Hello

  This question seems always? I mean is it a permanent status that your laptop won't turn on properly? Or is it that sometimes?

  To my knowledge the Vista default action for the power in the Start Menu button is sleep. If your laptop does not but would go in the mode 'sleep'.
  You can change it as described here:
  http://www.howtogeek.com/HOWTO/Windows-Vista/change-the-Windows-Vista-power-buttons-to-shut-down/

  In addition, you should check if your BIOS is up to date.
  Choose your model of laptop (it seems like an American series) and download the compatible BIOS.

  Check it!

• Touchpad does not work and Equium automatically restarts after a stop

  Something going wrong drasticaly yesterday. I wasn't doing anything elaborate, just work excel and I'm tired of the Tablet touch and 'connected' one infrared I smile sometimes use... it did not work too well, low battery level, I guess, so I returned to the touch pad... but the touchpad was now for some reason, doesn't work do not at all and did not since...

  Turning off the laptop and was my solution, but he has not corrected the situation... the infra-red mouse works very well but with new batteries... on top of that, now when I turn the laptop off, it stops but then automatically starts once again, when a microsoft message appears saying that the computer has recovered from a serious error.

  So since this episode, the touch pad does not work and the computer will stay off! And maybe it's me crazy, but some of the keys on the keyboard are more sensitive as they once were.

  It was a satellite, and bought only in early January.

  If anyone can help I would appreciate it a lot.

  Thank you

  Hello

  Sound very mysteriously. However, as in the first answer mentioned the function FN + F9 turn off and turn on the touchpad.
  I also recommend to check the Device Manager if all devices are working properly.
  If you find any errors, but the problem persists then the step of text should be the reinstallation of the operating system. In this case, please use the recovery CD.

  If the recovery procedure will not solve the problem, I guess there must be something wrong with the hardware and the ASP help is needed. Guys could start diagnostic tests and can locate the fault.

• Satellite P200-1 after restoring I have drive E: instead of D:

  Hello

  I have restored my P200-1BY due to problems of wifi and it seems that my data partition is now named E:

  I think he was named D: which would make sense, but I'm not sure. Is this normal?
  Thank you.

  Hello

  Usually the first partition is referred to as * C: *
  The second, a hidden partition which is necessary for Vista restore files can be named * D *.
  The * E * letter could be assigned to the CD/DVD drive.

  However, the letters are not fixed and can be changed. This is possible in disk management.

  Good bye

• Satelite L50D-B Constant restarts after a stop

  Hello
  My laptop does not stop. I have 10 window. All records are up-to-date. BIOS v1.6.

  When I choose to stop the laptop seems stopped, but then again.

  Hardware or software problem? Please advice.

  Driver problem.
  Remove Windows 8 pilots in Control Panel.
  Let Windows Update to install the drivers from Win10.

• Satellite P200-144: after upgrade to Vista Premium to Ultimate Chicony camera fails

  I upgraded my P200-144 of Vista Home Premium, Vista Ultimate and does not today have the Chicony camera. Despite reinstalling the driver and all other available remedies found on the internet and this site the camera still does not work. Any ideas anyone?

  Hello

  You post a question that has already answered several times!
  It of not necessary to send always the same!
  Use the forum search before you open a new thread advanced!

  But because you are new here I'm patience with you!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  Finally I expect some reward points ;)

  Good bye

• Windows vista restart after I stop I have to unplg the power to stop

  whenever I closed my system reboot

  Hi antoniocasillas,
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
  
  Your computer restarts automatically if your he encounters an error that requires him to plant.
   
  Try to activate the option "disable automatic restart on system failure" to check if you receive the error message for the same.
   

  This option prevents Windows from automatically restarting if an error of Windows to fail.

  In the screen "Advanced Boot Options" choose this option.

  Check out this link to do the same thing:

  Start your computer in safe mode

  Advanced, including safe mode startup options

• Satellite P200-144: after upgrade to Ultimate Vista FN keys do not work

  Hello

  I've upgraded to Vista Ultimate and now the Fn keys do not work. Multimedia keys are beautiful, and execution of the program of Flash cards, but no Fn key. What should I do to get back them?

  TIA
  Geoff

  Like the first, you need to tell us which model of laptop you have.