Table of contents missing + / boxes (enlarge/reduce)

Similar Questions

• Table of contents missing after the publication in MP4 format

  I created a project and included a table of contents, I can review the project but and everything looks good, but when I publish and preview there is no table of contents is displayed.

  Using Captivate 6.01240

  Thank you

  Ernie

  MP4 is a video format, may not have interactivity, table of contents is not possible.

• Table of contents; Missing titles

  Hello

  I have a slight problem with table of contents. ID cs using 4 6.0.6.

  It include no more than 5 of the 26 items that are in my magazine. I usually just resolve this problem by manually, but I wanted this time to work as the address.

  I put all the titles of articles like (title style) so it should enter this one, but then he adds only 5 of them and he adds in the style of the title even though I said it should change the style of a style (issue of body).

  Which makes it look as follows:

  

  Instead of putting it where I want to get it, only 5 titles on more than 20 and with incorrect style in this case style of the title.

  Why would he do that?

  [Edit] Is there any other information I should give to make the problem appear more clear to one who reads this?

  Sincerely Evi

  Post edited by: Evicos added Version and patchnumber

  Right. Table of contents are driven by paragraph styles, character styles no, and if you applied character for heading styles to get the desired formatting, this explains also why they did not go on the formatting you expect inside the table of contents itself.

  Character styles are used to format the text isolated to a different aspect of the text surrounding in a paragraph - a kind of formatting of 'special cases '. THA basic appearance of all text in a paragraph is defined as the part of the paragraph style.

  There are two ways to change the formatting for individual cases, overrides and character styles the. Styles of characters themselves are not a substitution for the paragraph style and are very powerful. Most of the time, they are used to do things like change the size, color, or the weight of the type, but not the face (but you can if you wish), to empahsize a bit of text. The advantage of these "minimalist" character styles is that they aply the attirbutes even in any face, so if you change the paragraph style to change the font, you don't need to change the font in the style of character - also if your style is just to add the "BOLD" attribute, your text will be "BOLD" If the new police force also has a weight named "BOLD".

  There are complications, though, by bringing back the text with a style of character or the substitution of local formatting in a table of contents. Character styles applied and local formatting of trip with the text and are applied on top of any paragraph style is defined for FAKE ads. Fortunately, there is a way around this, and it is to apply these styles in the main text in the paragraph style using nested styles or styles GREP (a more complex topic) rather than by selecting the text specifically and apply a character style or local formatting. The styles being so left the paragraph style, they do not show in the table of contents, when you change the paragraph here (sorry if it's confusing) style.

  Boittom line, well that is probalby have you just need to use a paragraph style set correctly for your headers, without adding any character style or the replacements the at all.

• How to create a Table of contents of a book as opposed to a single document?

  I'm working on a book with several chapters. Each chapter is a separate document joined as well as the rest of the book in InDesign. I have a table of contents in each document, and the hyperlink works very well when the document is exported to PDF. However, I was unable to create a single comprehensive contents table on the front of the book before Chapter 1. I tried everything I know how to create a table of contents for a single document, but that does not work for me with so many documents in the book. Is there something I missed? I'd appreciate any help in this regard.

  In the Options section of the Table of contents dialog box, there is a checkbox: Include book of Documents.

  What is checked, he must analyze each document in a book for styles to be used in the creation of the table of contents.

• Publish online Table of contents does not

  I have published two documents printed with the publication online (InDesign 2015). Everything works well except the table of interactive contents (which works fine when I export to PDF).

  The table of contents in the online version gives an error when you click on the entries.

  Is this a bug or I do something wrong?

  Hi Melissa,

  Please make sure that during the creation of OCD, 'Make text anchor in paragraph source' is checked in the Table of contents dialog box. This option is necessarily be checked when creating the TOC to make OCD clickable links in EPUB documents and publish online.

  And for the hyperlink to page iv, it seems that you have an empty frame on an entire page that is above that block of text in the click event handler then not sent to hyperlink hyperlink. In the case of text hyperlinks make sure there are no objects that overlap on.

  Thank you

  -Anshul

• Including the text marked in a Table of contents

  I would like to include only a few words of a paragraph in the Table of contents.

  For example, in the paragraph of the example, I would that the term blablabla appear in the table of contents "blah - blah blah blah blah."

  Is there a way I can tag 'Blabla' and I then the Table of contents dialog box include the referenced text?

  I use CS 5.5.

  Thank you.

  Fix. You must build the manual table of contents in this way, the first time (and make additions/subtractions manually), but once links are do they must be updated. You can do a regular TOC for reference at the end and put it on the editing table to verify.

  A word of warning, although I wouldn't do this with a book file to make a link to different documents. Inter-document cross-references have the reputation of being very fragile.

• Update the table of contents, errors in bookmarks

  When I update my table of contenst, it creates errors in my favorites. I have a hierarchy of level three with my titles of paragraph in my table of contents. When I update the table of contents, it takes the last item in my lowest level and a level higher than it is actually.

  Any ideas of what is happening and how can I fix?

  OK, thanks to your last message, I began to explore the Table of contents dialog box and understood what the problem was. It had to do with the levels that I had assigned to the table of content items, which I was incompatible. Now I have the right levels assigned to the table of content items and it updated bookmarks perfectly!

  Thanks for your help.

• Problem with proper alignment of the character in my table of contents Styles

  Hi all!

  I'm working on my first book project and I have read so many threads here for the last hour, but I either just don't understand, or I have not found that I still had, so I apologize already where this question has been answered before...

  OK, so... I'm building my OCD and have set up corresponding TOC styles with paragraph styles used throughout the book.

  what I want is for the page number must appear before the entrance. so for the page number I put in place its own table of contents page number character style.

  NOW

  the page number appears left aligned. I checked the palette styles of character and here I can not put a tab for the page number appear stalled right...

  How can I get this page number to be propped right? and THEN, how can I specify the distance between the page number and the entry? There is "tab" mentioned in the Table of contents dialog box to specify the distance between the page number and the entry, but then I have to go manually every time something changes? that it is impossible? I saw in the palette paragraphy styles there is a section of tab... tried to grasp the tabs so the number seems to be right aligned and the distance to the entry, but nothing happened, then the number is glued directly to the entrance once the table of contents are generated...

  What's a sense?

  attach a screenshot in an attempt to clarify the question...

  hope you can help out me.

  Thank you very much in advance!

  see you soon

  STA - cy

  

  I played with this for almost an hour, and as much as I know there is no way to adjust the alignment of the page numbers in the table of contents, suggesting off the beaten path.

  After testing a whole bunch of stuff that didn't work, I came up with the somewhat strange solution, but not impossible to simply change the table of contents manually to insert the required number of spaces listed in each entry. It takes the police that you use for numbers has Lining Figures, and you specify that, in the style, but a solution of script (and I don't know if it is possible) which are the best that I can offer. To set the distance of the number on the text, use a tab and set the position as part of the style.

• Table of contents imported as the overlay of text have no active hyperlinks in PDF format

  Hello

  The model that I inherited uses a method in which the table of contents appear in the main FM as an insert text imported doc. To create the table of contents, a table of contents in autonomous is created and then imported as a text box to the specific location in the main file. When this FM file is saved as PDF hyperlinks in the page table of contents do not work.

  -Am I doing something wrong, or is - what a limitation of text import crashing like OCD?

  Thank you

  Donna

  For reasons specific to my application, I use books with a Table of contents file that imports the TOC file generated as a text overlay. And hyperlinks in the PDF file. I understand that, in general, the links in text ads that link outside of themselves are not active in the PDF file. But for some unknown reason, the links in my Table of contents work in the PDF file.

  So, I tested your case. I created a standalone table of contents for a single document (be sure to select create hyperlinks in the Set Up Table of contents dialog box) and then it imported by reference into the document. I created the PDF (print to the Adobe PDF printer) and the links work perfectly.

  Make sure that you have selected data Acrobat generated in the print dialog box, and THEN select make named Destinations in the links in the PDF Setup dialog box tab.

  I have also heard that if you apply a format of characters in a line in the table of contents, links will not work in the PDF file. It is another thing to check.

  Van

• CS4 Table of contents 'Other Options' button turns into a button 'Save Style'. Help?

  Can anyone help or someone encountered this before?

  When I open the Table of contents dialog box, the 'Other Options' button is there, just under the button "Cancel". BUT the second I go over it with my mouse to click on it, it turns into the button 'save the Style... ', never to return. I tried to navigate using the tab, with the same results.

  I can't do the things formatting I want unless I can access the 'other Options '.

  So my question is twofold: one, have you seen this and how to fix this? And two, is there a way to alter to access the items in the table of contents more Options?

  Thanks in advance!

  It's the kind of strangeness that I would say is a good candidate to replace your preferences

• Control the order of citation in the table of contents

  Hi, I created a table of contents that resembles the style of one paragraph for a newsletter. On the first page of the newsletter, there are two articles, and I would like to be able to control what article shows first. Is it possible to do this?

  

  If you look at the picture, I would 'Welcome' appears in front of "Managing your Performance."

  Thank you

  InDesign will index the table of contents, from left to right first, then from top to bottom. If you cannot use multiple paragraph styles to index the table of contents you can cheat InDesign to think that a text is still left one another.

  First, create a text box outside the page on the left side of the page, and bind this text box to the text box of welcome, then Indesign indexes this text box.

  This little thing of course only works if you don't not "entered sort in alphabetical order" enabled (Advanced settings) in the Table of contents dialog box.

• Table of contents - power of the text box

  Hello

  I recently started using Adobe InDesign and love it! I have a question around the table of contents. At the beginning of each chapter, we have a simple page with a box in it. (each chapter has about 10 pages). The intention is to have the content of the text become the title of the chapter box and have it displayed in the Table of content. The text box itself has several characters of new line in. When I generate the table of contents, InDesign creates several entries in the Table of contents (one per each new line in the text box). So my question is... Is there a way to specify that the content of the entire text box appears as an entry in the Table of contents. (I'd like to update the table of contents by hand to avoid any errors).

  I appreciate any help in this matter.

  Thank you!!

  So, you say that, break forced line and you want that all the rows in the table of contents? I think that I misunderstood.

  If this is the case you're going to the trouble of formatting of the table of contents, as the forced line break will carry you through to the table of contents (you can change the colours using styles or nested GREP and those will not set if you use a different style in the table of contents list itself).

• Table of contents Table of contents in excess but cannot be a text box

  I'm building a book ID CS6.  My OCD is in a file of preliminary pages.  When I update my OCD, it updates only through Chapter 9, even through there are 11 chapters.  When I open the table of contents in the mode of the editor of history, it is said there is overset text and show the rest of the chapters for the TOC.  However, when I try and expand the area of text, nothing happens. I checked the file for Chapter 9 and see nothing different from other files.  I already rebuilt this book because the models and other once got all twisted up.  I prefer not to rebuild again.

  

  It turns out that the problem was caused by the dashed line.  I had the line set at 1 p p 0 and - 1 0 to leave a space for the chapter number.  However, when the number became 2 digets (10, 11, etc.) the text was obliged to the mark of the tab, made wide for the text box and so in excess.  I don't know why he didn't just go on a new line, but by increasing the dash a little, the text appeared.

  

• Parameters of the table of contents: enlarge the symbol / symbol hide

  Hello everyone,

  in the skin editor / TOC-settings of 5 in captivity, I discovered two new (?) settings: symbol enlarge / hide symbol (I don't know if it's the exact terminology in the English version, because I use the Germany) where you can select the chart. Unfortunately, I wasn't able to find out how to work these settings or to find any description on the internet. Does someone could give me a clue here?

  Best regards

  Jan

  Guten Tag Jan,

  I think you speak of these two regions to change the icons for opening/closing of overlay to the table of contents. Wanted to add a screenshot with the English version, but the forums does not for the moment.

  They are intended to replace the small default icons for the table of contents in overlay mode of opening and closing by your own icons. There was a lot of complaints about these icons (double arrows) because they were so tiny.

  The other new feature (width) allows you to extend the width of the table of contents to more than 250px (always at least) which can be useful on glass with entries of large text for slides.

  Lilybiri

• Missing entries in Table of contents

  I am working on a long document (550 pages...) in InDesign CC 2014 and has created a style of table of contents in order to generate it.

  But for some strange reason some entries are left behind not taken at the table of contents are generated...

  The styles are applied and included in the table of contents style...

  Someone has encountered this problem before?

  I've seen this when the style names are duplicated with capital letter, or there are two copies in groups of different styles (or in a style group), and both have been applied to different parts of the text.