Table of contents; Missing titles

Similar Questions

• Table of contents missing + / boxes (enlarge/reduce)

  Never seen this before, but my OCD is suddenly missing the + / expand/collapse buttons section. Anyone know what the problem is here? Table of contents are the binary value.
  
  Here are the parameters of the HHC file:
  
  < object type = ' text/site properties' >
  < param name = "FrameName" value = "_blank" >
  < param name = 'WindowName' value = 'Freedom' >
  < param name = 'TypeSite' value 'toc' = >
  < param name = 'Styles of window' value = '0 x 800002' >
  < param name = 'ExWindow style' value = "0 x 100" >
  < / object >
  
  Any change in params?
  
  Thank you
  
  John

  I found it. I know well the tabs TOC/project settings but didn't initially see the box plus/minus Squares. In fact, it is inactive. I could only activate when certain other parameters have been activated. In any case, it is fixed. Thanks a lot for your help!

• Table of contents missing after the publication in MP4 format

  I created a project and included a table of contents, I can review the project but and everything looks good, but when I publish and preview there is no table of contents is displayed.

  Using Captivate 6.01240

  Thank you

  Ernie

  MP4 is a video format, may not have interactivity, table of contents is not possible.

• How can I include the header of the table of contents in the table of contents?

  I prepare a table of contents in InDesign CS3 (Macintosh OSX 10.5.8)

  I added all the paragraph styles to the list of paragraph styles, I have want to appear in my Table of contents.

  However, I would also like the table of contents itself appear in the table of contents:

  In the case of the table of contents is placed on page 3, he want it looks like this

  Table of contents:

  Title page... page 1

  Thanks... page 2

  Table of contents... .page 3

  Table of figure... page 6

  Chapter 1... page 10

  and so on...

  I have included the paragraph style in the list of paragraph styles, I want to have in my table of contents. But this does not have an entry in my table of contents that is named "table of contents".

  I would be grateful for any advice.

  Thanks in advance

  To do this add a nonprinting frame to Page 3 and add the words Table of contents using one of your styles that is picked up.

• Table of contents: linking the titles and page numbers

  Hi all

  In my paper, I created a table of contents.

  Like most books, I want to link titles and paragraphs to their pages by a dotted or dashed, just like that:

  Title - P2

  subtitle - P3

  etc...

  I also use these links in checklists to connect the left side of the list to the right side.

  And this isn't something wrong: this faclity Visual really helps you recognize what's on poles on the right with the correct item on the left.

  Is there a way or a function in Pages to automatically create these links instead of typing for each item in the Table of contents (which can be very long, little time)?

  Thanks for your time.

  Lopez.

  With your table of contents is generated, click each item in the table of contents (for example, title, subtitle, title 1, etc.) so that it appears highlighted. Your right in v5.6.2 Pages panel will show the Table of contents and a text label.

  Further down in the text tab, there will be an area of tabs. If it is not expanded, click the word ▸ tabs. Click any selector in the column Leader and the choice of your choice for your boss to fill. There is no provision to set a color of head. Here is an example:

  

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• How to choose half of a title to appear as title 1 in the Table of contents?

  I am creating a document containing several job descriptions and want to have a hyperlink in a Table of contents description of each individual work. The way securities are in the format looks like this: "profile Description: President. The only part of the title I want to appear in the Table of contents is '' President. '' How can I select the part of the title to post a link in the table of contents? I've highlighted the portion of the line I want to appear as the title 1 but Word (2010) insists on the selection of the entire line and not just the part that I chose to be Heading 1. I know that I could drop the word 'Président' to another line, but it's not the look I want. I think I should perhaps use a bookmark or do something with the field but am way over my head on this one. I only know some of the basics and the terms bookmark and the field are new for me and quite mysterious. Any help would be appreciated, but I am a novice and must be crossed it work with no baby.

  KathieYZ

  Ok. I assume that you do this in Word?
  If so, then the word is part of office (for which there are specific forums on this site) and no windows.
  Click on the Forums link at the top of this window, choose the desktop, and then select the version of Office you are using and choose the word.
  Post your question here.

• Title chapter works on numbered list, but does not redial in Table of contents

  I'm doing a long document and put each chapter in a separate file.

  I use the chapter number variable in the title of the chapter and bullet styles is used in the heading and numbered lists set to ^ h ^ #^ t. It works very well in all the chapters.

  For example:

  Chapter 1

  1.0 header of a zero with the numbered list style

  Copy copy copy

  1.1 header a numbered list style

  Copy copy copy

  1.2 header a numbered list style

  and so on

  Chapter 2

  2.0 header with zero style

  Copy copy copy

  2.1 header a numbered list style

  Copy copy copy

  2.2 header a numbered list style

  and so on

  BUT when I create the table of contents and want the header of those who are listed, they appear like this

  1.0 header of... 1

  1.1 header... 5

  1.2 header of... 7

  1.3 header of... 9 (this should be the 2.0 header)

  1.4 header of... 12 (it should be 2.1 header)

  1.5 header of... 13 (this should be the heading 2.2)

  How to make the table of contents list the correct numbering, using the chapter title variable that is used in each file in the book?

  Thank you

  Maryann

  Okay, I think that I have now.

  1. Open the table of contents
  2. Layout > Table of contents
  3. Changing the shape of paragraphs numbered to include the full paragraph, OK
     
  4. If it does not, you will have duplicate numbers, but the new set is correct.
  5. If so, window > Styles
  6. Edit the table of contents and change the Type of list to none.
  7. Update the table of contents once more

  Looking forward to hear words that's it.

• Chapter number on the same line as the title of chapter in the Table of contents

  How can I get the chapter number on the same line as the title of chapter in the automatic table of contents (page layout: Table of contents)? I want to have the number followed by a period, like this: "1. the chapter title" with the page number on the right (no problem with the page number). See the picture of what has gone wrong. I wonder if I put chapter numbers in a separate text box in the document without a paragraph break after the number. I know I can change at the end, but do not want to lose the settings with the updates.

  

  Make the announcements of chapter TOC using a Style that includes a numbered list of type...

• Is there a way to "force" a title that is not screw up the Table of contents?

  I used SHIFT + ENTER to force the rest of the topic on the next line, but it screws to the top of the table of contents.

  Suggestions?

  Do not use hard returns. Anchor a block of empty anchor image in this position, running in Para, of equivalent right height to 3 lines of text in title.

  Put a non-breaking space between Tuesday and the morning, to keep them on the same line (Ctrl + SPACEBAR).

  Take the left edge of the AF with the graphical tool and drag it to squeeze the heading to the left until it sinks you want to appear on the page to the left. Table of contents entry will always be a single line.

  I can think of other ways to do this, but frame RRI technique is by far the easier and more understandable for the future stewards of document.

• Drag the titles not appearing is not in the table of contents - 7 Captivate

  Is someone can you please tell me why my slide titles will not be displayed in my project?  He says only: "Slide 1", "Slide 5", etc... ".  I have not worked with the table of contents a lot so this is all new to me.

  Table of contents will show Slide labels, no titles on slides. You can change them in the table of contents itself, but perhaps it is easier to score the slides.

  After marking, you need to click the Refresh button on the table of contents

• Cover previews and missing titles in the content viewer Adobe Android

  We test a folio using the new adobe content viewer for Android. All previews cover are empty in our library, and there is no title. All you can see are the blue snipes with the lightning on each. Since we have 10 + folios in this id, he makes extremely difficutlt to test. Anyone else encounter this problem and know a fix?

  We took a glance to this today. There is no image portrait cover associated with any one of the folios in the account. If there is no portrait cover provided that we can not show you add portrait covers, and then they'll show.

  The same goes for the missing titles. The Android Viewer shows the Folio number under the cover, and that is empty on your slips.

  Neil

• Chapter title, break/separation upward in the table of contents

  

  Hello

  I use FM11 on Windows 7.0.

  When I update my OCD, one of the chapter titles break and appear on 2 pages (as shown in the picture).

  I checked for Page breaks, extra spaces and tabs of paragraph etc.

  Also, pressing to clear the text GETS shrunk (tight upward) and not deleted.

  When the title of the chapter is a single line, break page disappears. (I have another file where the title of the chapter is in line 2 and it works well here).

  Many need help!

  As soon as possible please...

  In fact, the reference page specifies the content of the table of contents to use. The formattting is specified by the tag/style of paragraph defined in your catalog paraagraph.

  @ Kiathestar,.

  It seems that you have a parameter keep with next, but also the widows and the orphans set to 1 in your paratags as a third level. These adjust to keep it with is cut and the widows and orphans is at least 2 lines.

  Also if you want to set the wrap properly on any of the TOC entries that span multiple lines, in the respective paratag on the Advanced tab, set the Minimum wee to be much superior to the wee Maximum value, for example

  

  This setting (counterintuitive) force the line to wrap up well before the right margin setting takes effect. The location of the scarf is a function of the mini/maxi report and vary quite a bit depending on the size of your font and fonts. Try values th 150-300% for the Minimum (in 25% increments) until you get an envelope to a visually desirable location.

• How to set different fonts for numbers in the titles and tables of contents

  Hello

  I noticed some people to use a different font for the numbers in the titles and tables of contents to get an extra magic. Is it possible to automate the use of fonts in paragraph styles?

  Oh and suggestions on which fonts would be a good thing for numbers?

  Thank you!

  Furthermore, you must doany of this fancy stuff if you use an OpenType font that made OSF glyphs (and if you are not you will need to set the font as part of your style). Just head on to the style definition and enable OSF there OpenType features section.

• Missing entries in Table of contents

  I am working on a long document (550 pages...) in InDesign CC 2014 and has created a style of table of contents in order to generate it.

  But for some strange reason some entries are left behind not taken at the table of contents are generated...

  The styles are applied and included in the table of contents style...

  Someone has encountered this problem before?

  I've seen this when the style names are duplicated with capital letter, or there are two copies in groups of different styles (or in a style group), and both have been applied to different parts of the text.