Table of contents presentation - ok to duplicate entries?

Similar Questions

• In the table of contents text wrapping

  Hey everybody-
  
  I just bought RoboHelp version 6 last week and is developing a WebHelp project. I remember when I was using a very old version of loooong ago someone had posted a workaround solution that allowed me to say to the table of contents to wrap long names entry, rather than being partially hidden. I hope that over the last ten years, which would be something fixed in a new version, but it isn't - unless I'm missing something.
  
  I saw the link on this forum at the forefront on the enlargement of the TOC pane, but I would rather not do that.
  
  Someone know how I can get the text to be sent back?
  
  Thanks a lot for your help!

  Will do. Thank you very much!

  I found the Archives announcement about. The answer is that there is currently no way to wrap TOC entries. Just in case someone else I was wondering on this subject...

• in the tables on Pages duplicate entries

  I have a Pages ' 09 with a table document. It contains hundreds of entries. There seems to be a lot of duplicates. Instead of using all of them manually find and delete, is there another way to do this? Also, how can I stick to the top of the table and remove empty lines after deleting of entries?

  Frank

  There are no controls in Pages ' 09, or Numbers ' 09 to remove duplicates of the tables. There is a checkbox in Excel to remove duplicates. There is also a checkbox in LibreOffice Calc under data: filter: Advanced Filter: Options for removing duplicates. Copy / paste your table of Pages in one of these applications and once that duplicates are eliminated, paste the content in a table of Pages.

• Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

  I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

  I think that this would make clearer - and it would skip and tables of contents of books under.

• Table of contents are not present in CHM output generated with Robohelp 2015

  Hello. When I generate CHM output HR 2015, the table of contents are missing, but the search and glossary tabs are present. I won't open the file from a server, but from my desk. I copied from the server on my desktop and renamed it. The file has been created, I believe, RH 9, but I generated successfully exit CHM with this file in HR 10. Any ideas? Thank you!

  Dawn

  If I were in your shoes, the next thing I would try is to open the pod output configuration. Define a new CHM window there. So be sure to choose this new window in your presentation of single Source recipe.

  See you soon... Rick

• Is it possible to duplicate a link to the page on several pages, for example in a table of contents?

  Is it possible to duplicate a link to the page on several pages, for example in a table of contents?  I have a 140 document and each page needs a link to the table of contents.  I am familiar with how to add the link on each page, but I hope that there is a way to reproduce it, save me time.

  Are you really something under Label, on the Options tab?

• Missing entries in Table of contents

  I am working on a long document (550 pages...) in InDesign CC 2014 and has created a style of table of contents in order to generate it.

  But for some strange reason some entries are left behind not taken at the table of contents are generated...

  The styles are applied and included in the table of contents style...

  Someone has encountered this problem before?

  I've seen this when the style names are duplicated with capital letter, or there are two copies in groups of different styles (or in a style group), and both have been applied to different parts of the text.

• Can I hide a book or entry in the table of contents, based on a parameter?

  Hi all. I am currently using RH 11.  Is there a way in which I can hide a book or entry in the table of contents, based on a parameter passed in the URL?

  Rh10 introduced dynamic content to the user, otherwise known as categories of content-centric. In an SSL, you can create different outputs. The idea is that aid is open with a drop down menu where the user can select a category. If you look in the output folder, there is a folder for each category and you can open this assistance to a specific category. However, the user can then select other categories.

  The method is described in the HR visit to my site and the projects in the sample have a SSL showing the method.

  To open a specific category, point you to the start page for the category, the name of the category. So the TypeA category can be open from TypeA.htm.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Question: adding prefixes to the table of contents chapter entries?

  Hello I would like to know if anyone can help understand me how to format Table of contents entries to include a prefix.

  I want to each chapter entry in my table of contents to include the prefixes of words Chapter 1, Chapter 2... etc.

  For example. Just to say that my first chapter is called "aseptic".

  Currently the aseptic 'A technical' chapter title is formatted with a paragraph style called "chapter title", and this paragraph style is included in the "Styles of Table of contents.

  So for the moment my OCD simply shows the words "One Technique aseptic" followed by the page number.

  I want that entry of table of contents to say: "Chapter 1 asepsis.

  But I don't want the words "Chapter 1" to appear on the title page of actual chapter. "»

  Also, I want to be able to add unique style to the prefixes (I guess with character styles). So that I can make the "Chapter 1"style a little differently to "Aseptic", while both appear on the same line.

  Is it possible to do? I know that I can just click on the table of contents, and then make the changes directly, but it's not ideal because if I click on "update the Table of contents" then all changes are lost. I want the added prefixes dynamically so that they remain in place even if chapter headings are changed in the future.

  Thanks for any help.

  Of course, I see no problem:

  

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• ID Table of contents includes all entries

  When I create a table generated automatically the content of a book of 128 pages, entries will stop after several chapters. I checked the other chapters and all headers and chapter headings are decorated appropriately and should appear in the table of contents, and the content of the text frame simply ends before the last chapter. I had this problem ID CS 4. I had heard it was resolved with CS5, but it seems to have returned.

  I created this file by importing a Microsoft Word file (.doc) that had been cleaned and formatted using the add-on Editorium for Word in a new document, InDesign CS 5. The file also has a table that blocks the entire document when I try to adjust anything in it, but the table occurs early in the book so I don't think that is the question.

  Someone has an idea of what's going on here?

  If you do a find/change GREP query for. + and set the size to find the style of title, and the scope to the entire document, browse using search next (without making any changes) these positions?

  Have you tried: eliminate corruption of minor exporting

• Right align page numbers which is found to the left of the table of contents entries

  I posted a similar question a while ago I think that substances or Peter replied, but darn if I can find the thread. At that time, they provided a script that does a GREP search, find a sentence that starts with a number and its replacement by a tab. I still have the script, but for some reason, it does not properly with my new table of contents page layout. It must insert a tab on the left page number (page numbers are to the left table of contents entries) and force the numbers right aligned so that a single-digit right page number aligns with the right edge of a two-digit page number.

  Find: ^ (\d+)
  Change to the: \t$1

  What is happening in the new table of contents, this is the script is a figure and inserts a tab to the left of the page number. Page numbers are moving to the right, but they do not align right. They are further to the right, but they themselves numbers correspond to the left.

  I'm puzzled as to why the script does not work on this new layout. Now I use CS4 and it still works on the former route. Nothing terribly different about the new layout except that the column is much closer, and there are several columns threaded in the TOC instead of a long column and the chapter titles do not have page numbers (but all other entries have page numbers.)

  We should probably set the tabulator in your paragraph style: a tab aligned right for the numbers, followed by a tab stop that is aligned to the left to the text that follows this number. (I guess that there is a tab after the number.)

  Peter

• Go to the source of a table of contents entry

  I know that I can use the Bookmarks panel to go to the source of the page of a table of contents entry. Is it possible to go to the source of the paragraph so that the text cursor will go to the exact paragraph which is the source of the table of contents entry?

  Jay fresno wrote:

  Petteri,

  As you suggested, I created a shortcut for the command of hyperlinks: go to Destination.

  However, my table of contents entries are not in the hyperlinks Panel. they are listed in the Bookmarks panel. So, I don't know how the shortcut will help to to get to the destination of a table of contents entry, or how the shortcut differs by selecting the same command in the context menu of the control panel.

  Give advice on how to use the method you suggested to find the destination of a table of contents entry. Once found the TOC destination, how can I know what is the exact point - is there indication, such as the slider is inserted in the paragraph?

  The table of contents entries are disconnected from their sources. They are not hyperlinks. In InDesign, there is no way to move from an entry of table of contents to its source, given that in FrameMaker

  In the layout > Table of contents, the option dialog box create bookmarks PDF does exactly that - makes bookmarks PDF.

  InDesign TOC entries and the index entries require allows you to check hyperlinks in the section Include the export PDF dialog box to create them as clickable links in the exported PDF file.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Is it possible to customize the sensitive presentation - sequence of the table of contents, Index, tabs filter?

  Hello

  I use RoboHelp 2015 and reactive production layout, I need to rearrange these tabs. I want the tab of filtering of dynamic content to be displayed before the table of contents.

  Is it possible to re - sequence tab filters before tab table of contents by making some backend work in CSS or code?

  

  Or the other way improved - if we select filters say - sales, then sales related subjects should be displayed (rather extended below - just like the expansion of text).

  Is it possible to customize the sensitive provision in this way?

  --

  Thank you

  Christophe

  It is possible through the HTML code. In Notepad, open the file "Topic.slp". On line 35, you will see a list of links:

  

  You can cut and paste the link to get the correct order. The first tag appears on the left side. Please be sure to cut and paste the entire link ''.

• Duplicate sections throughout the table of contents after generating the HTML5 multiscreen output

  Use: RoboHelp 10, version 10.0.0.287

  Steps to reproduce the problem:

  1. click on file > create > main layout (Multiscreen_HTML5)

  2 al ' Generate window click on [Save and Generate]

  3. wait

  4. click on [view results]

  5 results show swathes of the table of contents reproduced in other sections.  10 more times to repeat the generation before that the entire table of contents points are correct and I can publish.  This is not preventing me from doing the job, but it's certainly a time killer.

  Background: I inherited a working version.  I did not create it.  I have more knowledge of the HTML language, but I'm not a developer.  I didn't upgrade beyond RH10 option.  I have studied this many times, but have not been able to find a solution.  The only other thing I've seen sometimes are error messages related to the toctree.js file, but I still don't understand those.  Even when I have not, this past yet, but I have included this error just in case it may be related, although I suspect that it is a separate issue.  I don't currently have the line in the js file because this sample is old and I have not seen the question at least a month.

  Other Notes: I've seen a few posts on a similar question in the printed version, but, I do not have a printed version.  I don't know if that makes a difference, and do I know if anyone in the past that put in place or even where to go to watch.

  

  

  Try to move the project to somewhere that the path is not so long and generate a new folder.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge