Table update: lack of expression
Hello
I'm trying to update a table with values from another table.
But I get expression missing error.
I have created sample data for verification
=============================================
create the table empmstdet as
(
Select 10 empid, 0 active of all the double union
Select 11 empid, 0 active double
);
update of empmstdet a set a.active =
Select active
(
Select 10 like empid, 1 as an asset of all the double union
Select 11 as empid, 1 as an asset of double
) b where b.empid = a.empid;
I use oracle 10g
Help, please
update of empmstdet one
Set a.active = (select b.active
(select empid 10, 1 as an asset of all the double union)
b Select empid 11, 1 as being active in the double)
where b.empid = a.empid);
This should do the trick... but you will update all rows in the table a no matter whether you look for a line in the table b (not a problem for your example). If you can't find any line, the value of the asset is going to be to NULL.
Alternative:
MERGE into empmstdet one
USING (select empid 10, 1 as an asset of all the double union)
b Select empid 11, 1 as being active in the double) on (a.empid = b.empid)
WHEN MATCHED THEN update set a.active = b.active;
(not tested)
No update on the 'a' - rows without matching entries in table "b".
HTH
Tags: Database
Similar Questions
-
ERROR: ORACLE prepare error: ORA-00936: lack of expression
Hello
I am required to run the 'pass-through' Oracle SQL, to extract data from tables in the SAS for processing and handling. My code (attached) reads and writes (runs) but with zero records to test first. I can't get beyond the error to prepare.
The request is just like other queries that seem to work, but I can't get past this prepare error. I have no other access to individauls with an adequate knowledge of the PL SQL and as a last stop hoped others in the forum could quickly identify the source of the error.
Thank you very much in advance for any help.
Jeff
_______________________________________
1; *'; * « ; * / ; Quit; execution risk;
2 OPTIONS NUMPAGE = MIN;
3% LET _CLIENTTASKLABEL = % NRBQUOTE (rx_biplr_v3_2);
4% LET _EGTASKLABEL = % NRBQUOTE (rx_biplr_v3_2);
5% LET _CLIENTPROJECTNAME = %NRBQUOTE();
6% LET _SASPROGRAMFILE =;
7
8 ODS CLOSE SUBJECT;
NOTE: Some of your options or statements will not be managed with the Activex or Java Series devices. Chart by default for these
drivers may be different from other SAS/GRAPH device drivers. For more information, please contact Technical Support.
9 OPTIONS DEV = ACTIVEX;
10 EGHTML TEMP FILE NAME;
NOTE: Writing, body HTML (EGHTML) file: EGHTML
11 ODS HTML(ID=EGHTML) FILE = EGHTML ENCODING = 'utf - 8' STYLE = EGDefault.
11. STYLESHEET=(URL="file:///C:/program%20Files/SAS/shared%20Files/BIClientStyles/EGDefault.CSS")
11. ATTRIBUTES = ("http://www2.sas.com/codebase/graph/v91/sasgraph.exe"="CODE") NOGTITLE NOGFOOTNOTE GPATH = & sasworklocation
11.
12
gaccessible 13%;
14 /********************************************************/
15 * RX_BIPLR_V3. SAS;
16 /********************************************************/
17
18 dm 'journal clearly out; delete ";
19 linesize options = 120;
20 option obs = 0 NoReplace;
21
22 ****************************************************************************************;
23 * date reviewed programmer in WHICH WAS MADE;
24 *----- -------------- ------------ -----------------------------------------;
25 * 2005 creation of David Boyd program to the test population;
26 *;
27 * 06/02/2006 Ivon Jones changed to include the whole of the population;
28 *;
29 * 20/07/2006 Ivon Jones identified the holdout data elements;
30 * or inclusion in the consolidation with;
31 * Robin report;
32 *;
33 * 18/08/2006 Ivon Jones updated specific therapeutic Classes.
34 * 10 - 2009 J Shaf - changed to extract actual or potential of UBH bipolar Dx and medical claims.
35 ****************************************************************************************;
36
37
38
39 * % let allclmorgn = (', 'A'); / * claims origin code * /.
40% would let begdate ='01 SEP 2009;
41% let enddate = 30 SEP 2009 would be;
42% let q = %str(%');
43
44
45 data _null_;
46. call symput ("fdos", put (intnx ('month' ' and begdate "d,-27," starts"), date9.));
47 call symput ('ldos', put (intnx ('months', ' and enddate "d-0, 'end'" "), date9.));
48, run;
NOTE: DATA statement used (total duration of processes):
time real 0.01 seconds
2 the system SAS 11:44 Friday, October 30, 2009
time CPU 0.01 seconds
49
50
51
52 **************************************************************;
53 *? Data _null_ stage allows to create a macro variable to;
54 * year and month, based on the macro ldos variable in the data;
55 * step up? ;
56 **************************************************************;
57
58
59 data _null_;
If 60 months ("& ldos" d) < 10
61, then call symput ("yr_mo", compress (year ("& ldos" d) |)) '0' || months ("& ldos" d)));
62 other call symput ("yr_mo", compress (year ("& ldos" d) | months ("& ldos" d)));
63 to run;
NOTE: The numeric values were converted to character values in the locations given by: (Line): (Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (total duration of processes):
time real 0.01 seconds
time processor 0.01 seconds
64
65 * make % & biplr_dx;
position 66% & begdate;
' 01 SEP 2009 would be
67% put & enddate;
30 SEP 2009 would be
68% put & fdos;
JUNE 1, 2007
69% put & ldos;
SEPTEMBER 30, 2009
70% put & q;
'
71
72
73 libname biplr ' / home/jshafi01/projects/adhoc/biplr_dprsn/data ';
NOTE: Libref BIPLR has been awarded with success as follows:
Engine: V9
Physical name: / home/jshafi01/projects/adhoc/biplr_dprsn/data
74 rosdwp libname = oracle user "& oracle_user." pass = "& oracle_pass." ' buffsize = 32767 path = "rosdwp"; "
NOTE: Libref ROSDWP has been awarded with success as follows:
Engine: ORACLE
Physical name: rosdwp
75
work.biplr_up_v1 76 data;
mbr_id length 77 attrib = $ 26;
78 the value biplr.biplr_ubh_med_v1;
79 to be performed;
NOTE: There were 0 read comments from the BIPLR data set. BIPLR_UBH_MED_V1.
NOTE: All data WORK. BIPLR_UP_V1 has 0 comments and variables 1.
NOTE: DATA statement used (total duration of processes):
time real 0.01 seconds
3 the system SAS 11:44 Friday, October 30, 2009
time processor 0.01 seconds
80
81 proc content;
82 to be performed;
NOTE: PROCEDURE used CONTENT (total duration of processes):
time real 0.03 seconds
time CPU 0.03 seconds
83
84 proc datasets
85 = rosdwp nolist library.
86. delete biplr_up_v1;
87 of quitting;
NOTE: The removal of ROSDWP. BIPLR_UP_V1 (memtype = DATA).
NOTE: PROCEDURE used DATASETS (time Total of processes):
time real 3.74 seconds
time CPU 0.03 seconds
88
89 proc datasets
90 = work nolist library.
copy 91 = rosdwp move;
92 select biplr_up_v1;
93 of quitting;
NOTE: Move WORK. BIPLR_UP_V1 to ROSDWP. BIPLR_UP_V1 (memtype = DATA).
NOTE: Variable labels SAS, formats and lengths are not written to the DBMS tables.
NOTE: There were 0 read comments from the WORKING data set. BIPLR_UP_V1.
NOTE: All the data ROSDWP. BIPLR_UP_V1 has 0 comments and variables 1.
NOTE: PROCEDURE used DATASETS (time Total of processes):
real 0.32 seconds
time CPU 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 * execute (commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint.
104, connect to oracle as rosdwp (user = "" & oracle_user. "password =" "& oracle_pass ' buffsize = 32767 path ="rosdwp")
104. preserve_comments);
run 105 (alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
CREATE table biplr_rx like 106
107 SELECT
mrb_id 108,
pcp_spc 109,
rx_date 110,
4 the system SAS 11:44 Friday, October 30, 2009
Mark 111,
generic, 112
113 ahfs_cd
ahfs_dsc 114,
lbl 115,
strngth 116,
UNT 117,
spc_tx_cls_cd 118,
119 spc_tx_cls_dsc,
GCN 120,
rx_num 121,
rx_ingrd 122,
rx_paid 123,
rx_cnt 124,
rx_qty 125,
rx_day 126
127 rosdwp CONNECTION
128 (SELECT
129, middle of the year. UNIQ_MBR_ID as mrb_id,
130 DB. PRVDR_SPCLTY_DESC as pcp_spc,
FCP 131. LAST_SRVC_DT as rx_date,
132 JJ. BRAND_NAME as mark,
133 JJ. GNRC_NAME as generic,
134 JJ. AHFS_THRPTC_CLS_CD as ahfs_cd,
DD 135. AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 JJ. LABEL_NAME as lbl,
137 JJ. STRNGTH_NUM as strngth
138 JJ. STRNGTH_UNIT_DESC as unt,
139 JJ. SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 DD. SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 JJ. GCN_NUM as gcn,
FCP 142. PRSCRPTN_NUM as rx_num,
SUM of 143 (FCP. INGRDNT_AMT) as rx_ingrd,
SUM of 144 (FCP. PD_AMT) as rx_paid,
$ 145 (FCP. UNIT_SRVC_CNT) as rx_cnt,
SUM of 146 (FCP. DSPNSD_QTY) as rx_qty,
SUM of 147 (FCP. DAY_SUPLY_CNT) as rx_day
148
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN environment,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153 biplr_up_v1
154. WHERE THE
(155)
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and
157 (PHRMCY_CLM_FACT. FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
159 (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and
160 (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
161 (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND
162 (PHRMCY_CLM_FACT. LAST_SRVC_DT BETWEEN q. & fdos. & q and & q. & ldos. & q)
163)
164 Group By
165 mi. UNIQ_MBR_ID,
166 pd. PRVDR_SPCLTY_DESC,
FCP 167. LAST_SRVC_DT,
168 JJ. BRAND_NAME,
5 the system SAS 11:44 Friday, October 30, 2009
169 JJ. GNRC_NAME,
170 JJ. AHFS_THRPTC_CLS_CD,
171 JJ. AHFS_THRPTC_CLS_DESC,
172 JJ. LABEL_NAME,
173 JJ. STRNGTH_NUM,
174 JJ. STRNGTH_UNIT_DESC,
175 JJ. SPECF_THRPTC_CLS_CD,
176 JJ. SPECF_THRPTC_CLS_DESC,
177 JJ. GCN_NUM,
FCP 178. PRSCRPTN_NUM
179);
ERROR: ORACLE prepare error: ORA-00936: lack of expression. SQL statement: SELECT middle. UNIQ_MBR_ID as mrb_id,
RDL PRVDR_SPCLTY_DESC like pcp_spc, FCP. LAST_SRVC_DT as rx_date, JJ. BRAND_NAME as brand, JJ. GNRC_NAME as generic,
DD. AHFS_THRPTC_CLS_CD like ahfs_cd, JJ. AHFS_THRPTC_CLS_DESC as ahfs_dsc, JJ. LABEL_NAME as lbl, JJ. STRNGTH_NUM as
strngth, JJ. STRNGTH_UNIT_DESC as unt, JJ. SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, JJ. SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, JJ. GCN_NUM as gcn, FCP. PRSCRPTN_NUM as rx_num, SUM (FCP. INGRDNT_AMT) as rx_ingrd, SUM (FCP. PD_AMT)
as rx_paid, SUM (FCP. UNIT_SRVC_CNT) as rx_cnt, SUM (FCP. DSPNSD_QTY) as rx_qty, SUM (FCP. DAY_SUPLY_CNT) as rx_day
OF PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mi, DRUG_DMNSN JJ, pd of the PRVDR_DMNSN, biplr_up_v1 () WHERE the
(biplr_up_v1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and (PHRMCY_CLM_FACT. FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
(PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
(PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND (PHRMCY_CLM_FACT. LAST_SRVC_DT BETWEEN ' 01 JUN 2007"
and 30 SEP 2009') Group By mi. UNIQ_MBR_ID, pd. PRVDR_SPCLTY_DESC, FCP. LAST_SRVC_DT, JJ. BRAND_NAME,
DD GNRC_NAME, JJ. AHFS_THRPTC_CLS_CD, JJ. AHFS_THRPTC_CLS_DESC, JJ. LABEL_NAME, JJ. STRNGTH_NUM,
DD STRNGTH_UNIT_DESC, JJ. SPECF_THRPTC_CLS_CD, JJ. SPECF_THRPTC_CLS_DESC, JJ. GCN_NUM, FCP. PRSCRPTN_NUM.
NOTE: PROC SQL set NOEXEC option and will continue to check the syntax of the instructions.
180 run (drop table biplr_up_v1) in rosdwp;
NOTE: Statement is not executed because the NOEXEC option.
181 disconnect of rosdwp;
NOTE: Statement is not executed because the NOEXEC option.
182 of quitting;
NOTE: The SAS system is stopped at this stage of processing errors.
NOTE: PROCEDURE used SQL (total duration of processes):
time real 0.14 seconds
time CPU 0.03 seconds
183
184(1) assuming that LAST_SRVC_DT is a column of PHRMCY_CLM_FACT, to precede the table alias "FCP" rather than the full table name. If a table alias is specified in the FROM clause, it should be used rather than the full table name when you reference the columns.
2) there are two tables in the WHERE clause that do not appear in the FROM clause:PHRMCY_FINL_CLM_DMNSN
MBR_BNFT_DMNSNuser12142482 wrote:
Hello again,Wish Oracle was a bit more informative. Uses an Institute of SAS product called Enterprise Guide. A "hot fix" has been installed to solve a problem that the product appears unable to save the latest version of the revised code changes (hence "BETWEEN between" remaining even after an earlier edition). In any case, with the change, now get this error:
«ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT".» ' LAST_SRVC_DT': invalid identifier. (The log file is displayed below)
-The-Les restes remains of the error, no matter if code "pass" is used to move the date range to Oracle (which seems correct to the log output below that I believe), or if I hard code the date range in the query SQL PL itself.
-L' preparation error always appears at the end of the internal SELECTION.
-L' error of preparation remain, with or without the GROUP BY clause.Is there something else I'm missing? Someone suggested a reserve word - but other versions of the ANSI SQL standard, I don't see that is the case. I went to Support SAS and SAS list serve to the University of Georgia, but nothing definite from these sources. Have requested either able to run Oracle directly, outside this SAS Institute product - process.
Any suggestions are greatly appreciated. Thank you to all the world very much.
Jeff
150 OF
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN environment,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155 BIPLR_UP_V1 BLPR2
156. WHERE THE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and
158 (PHRMCY_CLM_FACT. FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
160 (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and
161 (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
162 (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND
163 (PHRMCY_CLM_FACT. BETWEEN LAST_SRVC_DT & q. & fdos. & q and q & ldos. & q)
(164);
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT." "' LAST_SRVC_DT ': invalid identifier. SQL statement: -
ODI-1228. ORA-00936: lack of expression
Hi all
I have an existing map where I load data flatfile Hyperion Essbase 11.
This is achieved in the 2 interfaces.
1. 1 flat file, 1 table Oracle to Oracle (staging)
2. oracle (Staging) to Hyperion Essbase
I am currently working on interface 1 that has 2 sources: a flat file and an oracle with a join condition table and an oracle target. The change is the addition of 2 new columns. I added 2 new columns in the flat file. I added these 2 columns to the target oracle table also. I changed all the MILES that are:
1. oracle to SQL file
2. LKM SQL for Oracle
3 control of the IKM SQL add - Mindstream - DataQuality - tests
Diff of the target staging area is not checked.
Data are not be fulfilled to target oracle table. I get the following error.
Error: ODI-1228: data_V2 load TXT_ORA 7B (integration) task fails on the target of ORACLE ORA_HYPTEST connection.
Caused by: java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression
I tested the connection in the scheme physical and is very well. I am able to see the structure of the table also under the mapping tab with which I think that I am connected to the target.
Kindly advice.
Thank you
Hello
Can you please open the step failed ODi operator and goto code tab and copy and paste the code into the SQl command prompt and run manually and see the same error message comes or not, if there is error coming on yesy interface map.
hope this will help you follow the question
Kind regards
Phanikanth -
I still get the update for 2005 express edition SP4 on my automatic updates
Windows XP version 2002 the home Ed.
I have Windows XP Home ed. 2002 version on my laptop, I get the update for 2005 express edition SP4 on my automatic updates. Should I ignore it?
You missed to type exactly what says the photo at the top of the first window I had open to you.
You typed the name of the product by typing the name of full patch available for you. "Microsoft SQL Server 2005". This is the product that is the update for.
This site, the site of Windows/Microsoft updates and - well - any web site of Microsoft is not * my * web site. Like you and many others who ask questions and answers on this forum, I am just a user of the products in question. You do not normally talk to Microsoft in any direct way (or representative) in these forums. There are Microsoft employees that could pop and answer a few questions here and there-, but for the most part paert - just people devote time and knowledge freely.
Now, back to your question. Looking at article in the Knowledge Base Microsoft (KB) for the update that you say is offered:
http://support.Microsoft.com/kb/2463332He said one of these products:
- Microsoft SQL Server 2005 Analysis Services
- Microsoft SQL Server 2005 Developer Edition
- Microsoft SQL Server 2005 Enterprise Edition
- Microsoft SQL Server 2005 Enterprise Edition for Itanium-based Systems
- Microsoft SQL Server 2005 Enterprise Edition X 64
- Microsoft SQL Server 2005 Express Edition
- Microsoft SQL Server 2005 Express Edition with Advanced Services
- Microsoft SQL Server 2005 Reporting Services
- Microsoft SQL Server 2005 Standard Edition
- Microsoft SQL Server 2005 Standard Edition for Itanium-based Systems
- Microsoft SQL Server 2005 Standard Edition X 64
- Microsoft SQL Server 2005 Workgroup Edition
- Database internal Windows
Could be the reason that this particular update is offered.
As a general rule, given you have Windows XP, would you install updates critics/high-priority updates from Microsoft, or Microsoft/Windows Update web site. The optional parameter is only... As an option. Most of the people here would agree - you should avoid all non - Microsoft drivers for hardware devices available from automatic updates from Microsoft, or Microsoft/Windows Update web site.
-If you install this update? Yes.
Why? You have the a product mentioned above installed and it needs patches.
What happens if you have trouble to install the update? The web page I've linked to the KB article has a section "Troubleshooting Windows update issues" - use if you have problems with this update of Windows.
-
I want to download Windows Mail as it is a more updated from Outlook Express version, my computer has Outlook Express preinstalled on it when I bought it but I have never used, it would be better to uninstall Outlook Express before you install Windows Mail or do I need to keep Outlook Express on my computer where Windows Mail needs to use some of the files I don't want these two e-mail on my computer programs as they would take so much space on my computer.
original title: Windows Mail DownloadSure. You can download and install WLMail 2009 on your XP machine. I have no idea why you prefer on Outlook Express, but each to their own. -
How to insert data into the table by using the expression builder in the assign activity
How to insert data into the table by using the expression builder in affect business in BPEl, I use SOA Suite 11.1.1.5
Can someone help me pleaseHello
I don't think that oraext:query-database() can insert data into the table.
What are your needs?
Can not you plan to use the DB adapter with the insert operation?Kind regards
Neeraj Sehgal -
SQL syntax exception: lack of expression?
I got following exception during execution:
public HolidayDAO locateByDate (local channel, Date date) {}
.........
Dim queryString As String = "select o o HolidayDAO where o.locale = '" + local + "' and o.date =: date;
Ask selectQuery = em.createQuery (queryString);
selectQuery.setParameter ("date", date, TemporalType.DATE;)
...........
}
I've stated in the HolidayDAO class:
@Column (name = "DATE")
@Temporal (TemporalType.DATE)
private date;
Exception [EclipseLink-4002] (Eclipse - 2.3.0.v20110604 persistence Services - r9504): org.eclipse.persistence.exceptions.DatabaseException
Inner exception: java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression
Error code: 936
Call: SELECT HOLIDAY_ID, DATE, PLACE, YEAR OF ORA47111. S_HOLIDAY WHERE ((LOCALE =?)) AND (DATE =?))
link = > [2 bound parameters]
Query: ReadAllQuery (referenceClass = HolidayDAO sql = "SELECT HOLIDAY_ID, LOCAL DATE, YEAR OF ORA47111. S_HOLIDAY WHERE ((LOCALE =?)) AND (DATE =?)) »)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:333)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:644)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:535)
at org.eclipse.persistence.internal.sessions.AbstractSession.basicExecuteCall(AbstractSession.java:1702)
at org.eclipse.persistence.sessions.server.ServerSession.executeCall(ServerSession.java:566)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:207)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:264)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:646)
at org.eclipse.persistence.internal.queries.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:2592)
at org.eclipse.persistence.internal.queries.ExpressionQueryMechanism.selectAllRows(ExpressionQueryMechanism.java:2551)
at org.eclipse.persistence.queries.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:418)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:1097)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:829)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:1056)
at org.eclipse.persistence.queries.ReadAllQuery.execute(ReadAllQuery.java:390)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeInUnitOfWork(ObjectLevelReadQuery.java:1144)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2863)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1501)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1483)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1457)
at org.eclipse.persistence.internal.jpa.EJBQueryImpl.executeReadQuery(EJBQueryImpl.java:485)
at org.eclipse.persistence.internal.jpa.EJBQueryImpl.getResultList(EJBQueryImpl.java:742)
at projapis.projrollup.beans.ManagedHolidayDAOBean.locateByDate(ManagedHolidayDAOBean.java:96)
at projapis.ms.project.ExtractProjectPlan.autoResourceMapping(ExtractProjectPlan.java:716)
at projapis.ms.project.ExtractProjectPlan.extract(ExtractProjectPlan.java:542)
at projapis.ms.project.ExtractProjectPlan.main(ExtractProjectPlan.java:994)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:837)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:523)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:862)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1153)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1275)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3576)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3620)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1491)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeSelect(DatabaseAccessor.java:931)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:607)
... 25 more'DATE' and 'YEAR' are SQL reserved keywords. You will need to use identifiers delimited for these names @Column("\"DATE\"") columns or change the name of the column: H_DATE
-
Run DA plsql code table updated using the click of checkbox
Hello
I have a box with action Dynamics plsql code to update a table when event = click/change, but only when the box is turned "on" everything seems to be ok, but the code plsql for updating the table does not work because the record in the table is not updated. Any help on this pls?Tell us is there a LOV for item checkbox?
Try sth like this:
Lets assume the id box is P1_CHECK.
Interior check point to put the list of values like this:STATIC:CheckMe;1
Then, when you create a dynamic action, put smth like this:
Event: Clicked Selection Type: Item Item: P1_CHECK Condition: equal to Value: 1
or
Event: Clicked Selection Type: Item Item: P1_CHECK Condition: JavaScript expression Value: $x('P1_CHECK_0').checked
Hope this helps you, Mimi
Published by: Mimi on October 28, 2012 21:06
Published by: Mimi on October 28, 2012 21:09
-
Hello
Is it possible that you can be constantly updated a table or chart in labview without going through the instrument inside the loop of processing of the information itself? Basically, I want to take 10 readings of voltage and updated after each iteration of the loop at the chart. The problem I have is that I need the table outside the loop because it is connected to other data as well.
Thank you
Konrad
-
Table update do not command button is held down
Hi guys,.
My application gets the data and then returns it in a table that is updated after each set of data is read. This part works fine, however I also require the user to be able to hold down one of the two buttons to control the function of an actuator control (forward and backward). Explain it further, when one of these buttons are pressed a voltage is output, releasing the tension is reset. However, the key is held down the table does not continue to date, when the button is released the table then updates through all the values in the queue. I understand that this is most likely a problem with holding the button causing the other user interface events are not processed. I therefore tried to use ProcessSystemEvents(), ProcessDrawEvents(), and experiments using an async timer to control the update of the UI through PostDeferredCallback(), all this without success.
If anyone can help with a solution that would allow me to run both of these functions required at the same time it would be greatly appreciated!
Thanks in advance
Ben
Problem solved by simply swallowing the event, I am able to perform the functions desired!
See you soon
Ben
-
Sansa Updater for Sansa Express - can we trust?
Last October, I found myself "bricking" my Sansa Express while trying to update its firmware. Fortunately I got it back working, but it took several hours of poring over forums and trying different things. Today, while a few new songs to the Sync feature, a window appears telling me that there is an update available. Can I trust him and how do I know what are the potential benefits of the update?
"brownie" wrote:
Let me rephrase my question, then - that the installation of the latest version of the firmware has improved...
Laughing out loud
"brownie" wrote:
and what are the benefits/bug fixed in the latest version of the firmware?
As I suggested before, read the Release Notes in the post that I linked to.
"brownie" wrote:
If I have the same problem of upgrade in October for no real benefit, I stick wth the current versison.
It is very possible that you already have the latest version, see how the latest updated for this model is 4 years old now. If you are less than a year ago, you have already installed this version. Check f/w on your Player version to confirm.
-
A table updated outside of the Apex are visible in the Apex?
Hi all
I want to insert into a table from the command line prompt, is it possible to see the update on the same table in my APEX application?
I tried, but it doesn't look like I have, is there something wrong or some tweak I need to do?
If the table is updated within the APEX, I could see it from the CMD. But not the other way around.
My system:
Windows 7
Apex 5
Oracle 12 c 12.1.0.2.0
Thank you.
948287 wrote:
Please update your forum profile with a recognizable username instead of "948287": Video tutorial how to change username available
I want to insert into a table from the command line prompt, is it possible to see the update on the same table in my APEX application?
I tried, but it doesn't look like I have, is there something wrong or some tweak I need to do?
If the table is updated within the APEX, I could see it from the CMD. But not the other way around.
Of course. You are
commit
ting external transactions before trying to view it in APEX? Explicit commits should not by their SUMMIT as at least a validation will be performed internally for each cycle to view/submit page. -
How to disable the index to the rows of the table updated
Hello world
I have a problem on a table with Oracle11g.
I would update a table a lines opposite two in a table. This table has an index, and during the inversion, the index is duplicated.
So, I turn off the index and then rebuild all indexes like this:
However, I can't update a table when my index finger is rolled unusable.
I create my table:
CREATE TABLE MY_TABLE( ID NUMBER(5) NOT NULL, TYPE NUMBER(1) NOT NULL, PRIO NUMBER(4) NOT NULL, CONSTRAINT PK_MY_TABLE PRIMARY KEY (ID, TYPE ) ); CREATE INDEX PRIO_UK ON MY_TABLE(TYPE, PRIO);
Then I selected all the elements and the results is:
ID Type Prio 1 1 10 2 1 11 Then, I tried to update this list with this script:
UPDATE MY_TABLE set PRIO = 11 WHERE ID = 1 AND TYPE = 1; UPDATE MY_TABLE set PRIO = 10 WHERE ID = 2 AND TYPE = 1;
I have an error on the first line, because the subscript for type 1 and 11 priority already exist.
You have another solution to solve my problem?
I thank you very much.
Do not disable your index. Just perform your update with a single blow. Like this
SQL> select * 2 from my_table; ID TYPE PRIO ---------- ---------- ---------- 1 1 10 2 1 11 SQL> update my_table 2 set prio = case when id = 1 and type = 1 then 11 3 when id = 2 and type = 1 then 10 4 end 5 where (id = 1 and type = 1) 6 or (id = 2 and type = 1); 2 rows updated. SQL> select * 2 from my_table; ID TYPE PRIO ---------- ---------- ---------- 1 1 11 2 1 10 SQL>
-
table update, cancel the change, another session could ' get value changes in 10g
Edit data in a table, then advanced to change its original value. In general another session could get changed by advanced in select value but it not work. After the "starting strength" I can get it.
I did this test in 11.2.0.3 and I get the value without the "starting strength". Who can tell me why? Thank you very much.
ORACLE 10.2.0.1, OS rhel5.4 x86_64
session1:SQL > create table ty (name varchar (20));
Table created.
SQL > insert into ty values ('XXXX');
1 line of creation.
SQL > commit;
Validation complete.
SQL > update ty set name = "YYYY";
1 line update.
SQL >
session2:
change cancel
Select
INDX,
ktuxesta,
ktuxecfl,
ktuxesqn,
ktuxesqn envelope #.
ktuxescnw scnW,
SNCB ktuxescnb,
ktuxerdbf dba_file,
ktuxerdbb dba_block,
nub ktuxesiz
Of
x$ ktuxe
where
ktuxesta = 'ACTIVE '.
;
KTUXESTA KTUXECFL KTUXESQN # SCNW DBA_FILE DBA_BLOCK NUB SNCB WRAP INDX
---------- ---------------- ------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ----------
263 ACTIVE NO 4 4 0 736229 5 59 1
BED > define dba 5,59
S/N 0X0140003B (5,59 20971579)
BED > find/c XXXX
File: /oracle/oradata/ora10/undotbs02.dbf (5)
Block: 59 Offsets: 1361 in 1872 Dba:0x0140003b
------------------------------------------------------------------------
58585858 0000000c 00480020 001 0002 001300e2 00000000 01000000 010000e2 c
0000000b 01140008 0401003 b fd070000 00000086 fd070000 a 00400101 002, 0086
00000019 0de30277 00000000 00000000 00000000 00000004 016d18bc 9c0a0000
2a 000010 0000005 00170004 002b 0000 00400101 9c0a00ba 80000075 0e4000b9 b
0e4000ff 12058102 0000002c 0000002f 00070600 00040001 00000002 c1170180
01800778 72021315 162e0180 0180000c 00180010 001 0002 00150005 02000005 c
02000000 00000000 0000000b 01133000 00040002 016d18bc 2a00003b 00400101
002e0008 10400001 12058101 00000065 00090700 00070002 0000002c 104000ff
00000001 80018001 80018001 8002c 109 07787202 1315162e 0000000c 00180010
001C 0002 00150005 02000005 02000000 00000000 0000000 01132f00 00040002 b
016d18bc 2a00003b 00400101 002f0007 10400001 104000ff 12058102 0000002c
00000037 00090700 00070002 00000002 01800180 01800180 07787202 c10e0180
1315162e 0000000c 00180010 001 0002 00150005 02000005 02000000 00000000 c
0000000b 01132e00 00040002 016d18bc 2a00003b 00400101 002c 0007 10400001
104000ff 12058102 00000036 00090700 00070002 00000002 c10e0180 0000002c
01800180 01800180 07787202 1315162e 0000000c 00180010 001 0002 00150005 c
< 32 bytes per line >
BED > d/v s/n 1361 offset 5.59 County 10
File: /oracle/oradata/ora10/undotbs02.dbf (5)
Block: 59 Offsets: Dba:0x0140003b 1361 to 1370
-------------------------------------------------------
58585858 0000000c l 0048 XXXX... H
< 16 bytes per line >
BED >
BED > change/c Davis dba 5,59 1361 offset
WARNING: the content of previous BIFILE will be lost. Move forward? Y (Y/N)
File: /oracle/oradata/ora10/undotbs02.dbf (5)
Block: 59 Offsets: Dba:0x0140003b 1361 to 1370
------------------------------------------------------------------------
44444444 0000000c 0048
< 32 bytes per line >
BED > sum dba 5,59 apply
Check file 5, block 59 value:
current = 0x0c0a, required = 0x0c0a
BED > d/v s/n 1361 offset 5.59 County 10
File: /oracle/oradata/ora10/undotbs02.dbf (5)
Block: 59 Offsets: Dba:0x0140003b 1361 to 1370
-------------------------------------------------------
44444444 0000000c l 0048 Davis... H
< 16 bytes per line >
BED >
session3:
SQL > conn / as sysdba
Connected.
SQL > alter system flush buffer_cache;
Modified system.
SQL > alter system flush shared_pool;
Modified system.
SQL > conn ty/ty
Connected.
SQL > select * from ty.
NAME
--------------------
XXXX
SQL >
SQL > startup force
ORACLE instance started.
Total System Global Area 285212672 bytes
Bytes of size 2020192 fixed
83889312 variable size bytes
192937984 of database buffers bytes
Redo buffers 6365184 bytes
Mounted database.
Open database.
SQL > conn ty/ty
Connected.
SQL > select * from ty.
NAME
--------------------
DELALANDE
SQL >
In 11g
Oracle OS: RHEL X86_64 6.2 11.2.0.2
session1:
SQL > select * from test;
NAME
--------------------
XXXX
SQL > update test set name = "YYYY";
1 line update.
SQL >
session2:
SQL > /.
KTUXESTA KTUXECFL KTUXESQN # SCNW DBA_FILE DBA_BLOCK NUB SNCB WRAP INDX
---------- ---------------- ------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ----------
343 ACTIVE NO 1288 1288 0 1738249 3 242 1
BED > set s/n 3 242
S/N 0X00C000F2 (12583154 3 242)
BED > find/c XXXX
File: /oradata/oradata/ora10/undotbs01.dbf (3)
Block: 242 Offsets: 5741 to 6252 Dba:0x00c000f2
------------------------------------------------------------------------
58585858 0000000 c 004 c 0020 0002 001400 010000 00000000 01000000 cd cd 001C
0000000b 01130008 010000 00014 010e00ed 7d1a0000 00C 000000f2 0c 000000ee
7d1a0000 530c8b99 861 000000f8 has 0000 00000 00000000 00000004 00C 00d7dbf2
0de4dbff 7e000005 00200004 c 0500007 01b 00024 012f0000 80000096 861a 0062
0c 400060 0c4000ff 12058101 0000002c 00070600 00030001 00000002 00db005c
c10702c1 79640b0b 07018007 14151601 80018016 001d000c 004c 0020 00020002
00020007 00010001 000000 cd cd b 010000 00000000 01000000 0000000, 01060008
0c 010000 00014 000000ed 00000090 7d1a0000 7d1a0000 010d00c6 00C 000000f2
cea43485 861 has 0000 00000 00000000 00000004 8fb30005 0d 000000 00C 000000f1
001f0004 c 0500007 01b 00024 012e0000 861a 0062 80000082 0c 400060 0c4000ff
0000002c 12050101 00db0054 000706ff 00040005 00020003 00000001 ff000000
000600c 1 3f0000c1 610000c 1 16000079 640b0b14 15160080 00000080 0000000 c
c 004 0020 0002 001400cd 010000 00000000 01000000 0000000b 01210008 cd 001C
0c 010000 000000f2 00C 7c1a0000 000000C6 7d1a0000 00000090 00014 010c006f
861a 0000 00000 00000000 00000004 0de4dbff 7e000005 06C 00000065 cea43471
001C 0004 0500007c 01b 00024 012d 0000 8000006e 861a 0062 0c 400060 0c4000ff
< 32 bytes per line >
BED > change the offset of 3 242 s/n/c Davis 5741
WARNING: the content of previous BIFILE will be lost. Move forward? Y (Y/N)
File: /oradata/oradata/ora10/undotbs01.dbf (3)
Block: 242 Offsets: 5741 to 6252 Dba:0x00c000f2
------------------------------------------------------------------------
44444444 0000000c 004c 0020 0002 001400cd 010000 00000000 01000000 cd 001C
0000000b 01130008 010000 00014 010e00ed 7d1a0000 00C 000000f2 0c 000000ee
7d1a0000 530c8b99 861 000000f8 has 0000 00000 00000000 00000004 00C 00d7dbf2
0de4dbff 7e000005 00200004 c 0500007 01b 00024 012f0000 80000096 861a 0062
0c 400060 0c4000ff 12058101 0000002c 00070600 00030001 00000002 00db005c
c10702c1 79640b0b 07018007 14151601 80018016 001d000c 004c 0020 00020002
00020007 00010001 000000 cd cd b 010000 00000000 01000000 0000000, 01060008
0c 010000 00014 000000ed 00000090 7d1a0000 7d1a0000 010d00c6 00C 000000f2
cea43485 861 has 0000 00000 00000000 00000004 8fb30005 0d 000000 00C 000000f1
001f0004 c 0500007 01b 00024 012e0000 861a 0062 80000082 0c 400060 0c4000ff
0000002c 12050101 00db0054 000706ff 00040005 00020003 00000001 ff000000
000600c 1 3f0000c1 610000c 1 16000079 640b0b14 15160080 00000080 0000000 c
c 004 0020 0002 001400cd 010000 00000000 01000000 0000000b 01210008 cd 001C
0c 010000 000000f2 00C 7c1a0000 000000C6 7d1a0000 00000090 00014 010c006f
861a 0000 00000 00000000 00000004 0de4dbff 7e000005 06C 00000065 cea43471
001C 0004 0500007c 01b 00024 012d 0000 8000006e 861a 0062 0c 400060 0c4000ff
< 32 bytes per line >
BED > apply sum s/n 3 242
Check file 3, block 242 value:
current = 0xae88, required = 0xae88
BED >
session3:
SQL > alter system flush buffer_cache;
Modified system.
SQL > conn ty/ty
Connected.
SQL > select * from test;
NAME
--------------------
DELALANDE
SQL >
SQL > select version of v$ instance;
Version
-----------------
11.2.0.2.0
SQL >
Hell _in_memory_undo parameter
-
EMC CX4 and ESXi 5.1 table updated 1 compatibility?
Hi people,
Can you please share what it takes to make sure you can run the VM without any problems or downtime when you use the EMC CX4 array?
my table has been updated at the last TORCH as per screenshot below:
But anyway, VMware HCL and the KB site VMware KB: EMC CX and Firmware VNX and necessary ESX for the vStorage API for integration (VAAI) table support talking about something different and confused as per screenshot below:
Any kind of advice and suggestion would be greatly appreciated.
Thank you
Al
In my view, that he won't be problem in the environment. If it is not compatible does not mean that it won't work but simply means its not supported. You could talk to VMware guy once lifting a SR or something. And sorting to be on the safer side. These are things that you can't take risks with because that its your storage array that we are talking about.
Maybe you are looking for
-
How to give some access to the system without giving local administrator access?
Hello I'm looking for advice on how I can accomplish the following tasks without giving certain groups of rights of a local administrator on the server. Ability to query the status of all Windows Services Access WMI Ability to read all the event logs
-
Compatible Snaptics Ps/2 Port touchpad stop working, gives error Code 24
Last Thursday my Snaptics Ps/2 Port Compatible TouchPad stop working. Code 24 arrives. What is the 24 code and how can I solve this problem?
-
Hello. I have an annoying problem with the sidebar.exe : my computer running windows 7 Pro 64-bit and is continuously updated. I noticed recently that the various functions, such as the opening and closing of applications has become a little slow. Wh
-
BlackBerry smartphones lost my Memopad after upgrade to version 4.5
I've recently updated to version 4.5, and after installation, I noticed that a lot of things were missing, so I did a restore to my last backup. After restoring my backup, I always noticed that my memopad is missing. When I look at my list of files
-
Merging 3 rows in DreamWeaver using code
I'm trying to merge 3 rows in a great line. I don't get the arrow to do with Dreamweaver and I have tried code using rowspan = 3 attribute, but that has not worked. My table is 9 rows and two columns. Help please. Thank you