tablespace as defined in the model of the index is not used for manually defined indexes

Similar Questions

• How to disable the password screen when the computer is not used for a few minutes

  original title: password problems

  How can I stop my computer from ebb to needing a password, if not used for a few minutes

  Right-click your desktop image and select Customize,

  Click on the link at the bottom right, screen saver

  Uncheck the underlined

  

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Error creating Absence as "APP-COMPENSATION-51271: the assignment is not eligible for the element.

  Hello

  "APP-COMPENSATION-51271: the assignment is not eligible for the item."

  Hi Nelly,

  You can see below the two things that can be the cause of this error:

  1. the definition of the non-recurring item link which is tagged with such an absence, as a best practice that should be an open link. If the definition of link and the eligibility of the assignment does not match then you may receive this error.

  2. If you have defined a regulation for this type of absence plan, then check if the recurring element of the regime of accumulation is was tagged to the assignment for which you receive this error.

  Thank you

  Sanjay

• 1 service, the Service is not available for 1.1, product

  In the service contract, after her present for approval, the checklist come with an error "1, the Service is not available for product 1.1. I couldn't understand why. Could someone please help. I use instance R12 Vision.

  Hello
  This error message appears when the service given to the line is not available for the element defined in the Sub-line.
  Please follow the steps to check the availability of the service.
  1 resp. Service Manager Vision business contracts.
  > The installation program
  > Contract
  > Service availability
  Request for the service that mentioned you in the contract.
  > Access the product tab
  Check if the "Widespread" checkbox is checked or not.
  If the box is checked, please check if the element mentioned in the Sub-line is listed below in the exception block. If so, please remove the item from the region of exceptions.
  If the checkbox is not checked, please check.

  Reported issue will be resolved after the steps above are followed.

  Thank you

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• I deleted my gmail account just now and realized that it was the email that I used for my sync now.

  Hi all, thanks ahead for any help. I use sync for awhile now and works a lot and on all my devices. Now my problem is that I forgot the email that I use for my sync now has been deleted and I don't know how to change it. I save all the bookmarks and Favorites, but wanted to know if there was a simple way to change my sync now email to another gmail email address. Don't want to lose anything in case I have delete and then try to load my sync now the recovery key does not work with the new email.

  Sorry, you cannot change the user name (your email address) on a sync account.

  Set up a new sync account on a portable office/computer with the other Gmail account, but before you who make sure to separate all of your devices to your current synchronization account. Then connect your other devices to the new sync account.

• Recently downloaded version 9.0.1 and the url is not valid for the default home page. The default home page is still supported?

  I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.

  The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• Can the ipad pro be used for things like making project or a home school work?

  can the ipad pro be used for school of the thing (example: make the projects or homework)

  I do not have the ipad pro but I want but im trying to find something that can help the school things and when im not doing anything school i can have

  Something to entertain me.

  but my big question is can the ipad pro et for these things? (entertainment and school thing)

  You should ask your classmates what their experiences have been.

  Many schools use iPads.

  Check in the iPad app store for applications you need.  Microsoft office is available for the ipad.  It's a lean down.

  The education of web sites use flash.  The ipad does not support flash directly.  The substitution may not give you 100% flash.

  Flash on the iPad and iPhone

  Atlantic Puffin

  "Puffin Web browser is a wicked fast Browser Mobile Flash. Once users experience the exciting Puffin regular mobile Internet speed will be like torture. "Puffin Free is the free version of the family of puffins and supports Adobe Flash on cloud 'off-peak' from 08:00 to 16:00 (subject to change without notice).

  Free:

  https://iTunes.Apple.com/us/app/Puffin-Web-browser-free/id472937654?Mt=8

  Paid:

  https://iTunes.Apple.com/us/app/Puffin-Web-browser/id406239138?Mt=8

  Photon Flash Player for iPad - Flash Video & games more private Web Browser
  https://iTunes.Apple.com/us/app/photon-Flash-Player-for-iPad/id430200224?Mt=8

  "for iPad java is now a reality! .
  If you are still wondering how to use java for iPad, now you can! With virtual Firefox app, java for iPad browser is possible with a download simple app! Virtual browser for Firefox App opens a wide variety of games and applications - as java for iPad - that you can use for your iPad"
  http://www.virtualfirefox.com/Java-for-iPad

  By Splashtop Inc..
  Flash Video Web Browser - Full Chrome, IE, Firefox, Safari Compatible
  https://iTunes.Apple.com/us/app/Flash-video-Web-browser-full/id431331485?Mt=8

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• What resistance the Thermocouple VI convert use for thermistor CYC?

  What resistance the Thermocouple VI convert use for thermistor CYC?

  No, I do not claim that. I was just trying to interpret what you said.

  You indicated that you were using the Thermocouple convert VI. VI has a 'Sensor CSF' entry, and it can a value "Sensor IC" or "thermistor". So, I assumed you were talking about using this VI with "Sensor of CYC" = "thermistor". In this case the VI calls the convert thermistor reading VI to convert the voltage to temperature. It uses the default values for the resistance, and I guess that's what you were asking about. If you open the Panel before convert thermistor reading, you can see what resistance values it uses.

• I have my ID Windows Live ID have not used for quite awhile and I would like to start using it again, the live ID is always committed, however I don't remember the password

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  original title: can reactivate you my windows Live ID?

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  It is a peer-to-peer (user forum.  You don't talk to Microsoft directly.  The answerto your question is, "No."

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

• The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation.

  The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.

  -Thanks, Michael

  Hello

  What version of the Windows operating system is installed on your computer?

  I suggest you to refer to the following article in the Xbox and check if it helps.

  Xbox LIVE connection issues:

  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.

  Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10

  Forums Xbox: http://forums.xbox.com/

  Hope the information is useful.