The TOR Client activity
I'm trying to monitor the activity of the TOR Client via GIS IDs 5816/1 and 5816/0, however the IPS does not seem to pick them up. I look at the logs during execution of TOR to a test machine and I don't see anything. Is there something I'm missing or doing wrong? Both are enabled in the policy that I use on the IPS sensors.
Thanks in advance!
Jeremy
Jeremy;
You should probably make an initial connection traffic packet capture and analyze that it respects the specificities of the signature:
- 5816/0 signature checks to a URI that contains (case sensitive on ports TCP 80,9001) \tor\status\fp and 9030
- signature 5816/1 is looking for a handshake of TOR TLS on port TCP 443,9001 and 9030
If the criteria above are not present in the traffic that is using your TOR client, the IPS will not detect activity.
Scott
Tags: Cisco Security
Similar Questions
-
Wandering SQL Native Client Datasource - apparently, it's a pretty common problem and I see several resolutions to it. This problem started for our long company until I started working here. We do not allow remote connections. JDE Enterprise Server and SQL server are on the same subnet. Users are on a different subnet. SQL Server gets this message tries to connect to the Server Enterprise JDE:
Connection failed: State 08001 ' SQL': SQL Server Error 10061: Microsoft SQL Native Client TCP provider: no connection could be made because the target machine actively refused it.
I tried several suggested solutions and do not get the case. Any help is appreciated. Thank you, Sophie
Hello
The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the SQL Serversupport for assistance.
Hope the helps of information.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client
Hello everyone,
I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).
I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.
Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?
Waiting for your help.
Thanks in advance.
Samrat.
"Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).
Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.
-
Connection to the VPN Client 5.0.07 returns error 443 (activity included)
I got the Cisco VPN Client to work on my windows 8.1 box, but my windows 10 box gives me some issues.
I am trying to connect to a Cisco VPN using Cisco VPN Client 5.0.07.0290. 10 Windows. The first Cisco VPN would not install and I discovered that I had to install Citrix DNE before installing Cisco VPN. I did it and now the Cisco VPN client installs fine.
Now, I get an error 443 with the following log information when I try to connect:
---
Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\1 20:31:03.517 23/07/15 Sev = WARNING/2 CVPND/0xA3400017
Download key failed.2 20:31:03.517 23/07/15 Sev = WARNING/3 IKE/0xE3000002
Function download_key_entry failed with the error code of 0 x 00000000(ISAWIN:346)3 20:31:03.518 23/07/15 Sev = WARNING/3 IKE/0xE3000050
Failed to load IPsec keys4 20:31:03.518 23/07/15 Sev = WARNING/2 IKE/0xE30000A7
SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)5 20:31:03.533 23/07/15 Sev = WARNING/2 IPSEC/0xE3700003
Function CniMemRealloc() failed with the error code of 0 x 00000000 (IPSecDrvBSafeMem:152)---in the event logs, I see the following error message:Service Service VPN from Cisco Systems, Inc. is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
----Things I've tried:I took the SSL certificate to my computer that works (windows 8.1) and installed on my machine Windows 10 and ensured that it was valid. I then imported it in the Cisco client. It did not work.I checked the registry to ensure there was incorrect data in the DisplayName value, and that works.Any thoughts on what I might try next?Hello Onimallar,
I had this same problem with my Windows 64-bit 10. But on my 32-bit Windows 10 VM the Client VPN Cisco worked OK. So I looked into the differences. It seems that Setup 64-bit VPN client cannot change the network settings to add the network client 'DNE light filter' required for the properties of the network adapter.
I tried the Citrix DNE update, and while that helped Cisco VPN Client install successfully on my 64-bit machine, it would not establish a connection.
Using the differences, I removed the two of the DNE Updater and Cisco VPN Client, and then installed 64-bit Dell SonicWall VPN Client, as this has been installed in my VM 32 bits (the 32-bit version). This added the workstation network DNE filter of my 64-bit machine. I reinstalled the Cisco VPN Client successfully and was able to connect to a remote site with success.
It worked for me.
You can download the SonicWall VPN Client from:
https://support.software.Dell.com/SonicWALL-Global-VPN-client/Windows%20...
-
The HP Client Manager Security extension does not work
I have a red shield on the top right of my address bar saying"
The HP Client Security Manager extension does not work because the HP Client Security Manager plug-in has not been activated.Open the HP Client Security Manager Console browser integration user Page for additional instructions.How can I find a user control panel browser integration page? do not see it anywhere? help needed please thanks Bill
Hello
Unfortunately, you may have to contact HP support for more help:
Kind regards
-
The family safety activity log shows no data for Facebook
Original title: Family Safety + Chrome + Facebook
The latest version of Live Essentials is installed on Windows 7
Parental controls will not register the Chrome Facebook activity.I see in the activity that children use, for example, 0.5 hours of chrome, but there is no granular information.My daughter spent 2 hours on Facebook and the Family Safety activity log shows no data to Facebook.The computer is a new installation of Windows 7Live essentials have been installed yesterday.All web links for accounts for children have been created yesterdayDoes anyone have a suggestion on how to see real activity?Also, before someone suggests using another browser, is not an option, IE is uninstalled.Chrome is the only browser used because of all the android devices, we have.Thank youClient Windows Live Family Safety currently not reported HTTPS traffic unless the web of the child, filtering mode is set to "notify on the adult. Facebook who worked in HTTP mode has recently moved that the HTTPS site and that's the reason to not see, Facebook or any other site that is HTTPS in the progress report on Windows 7 machines.
It is resolved in Windows 8 and activity reports should show HTTPS traffic.
Current work around that for Windows 7 client
-Set the mode of web filtering to ' warn on adult "- child will receive a warning message if they go to all the adult sites and the parents will be informed in the annual report if the child decides to go to the site.
Sorry for the inconvenience.
Thank you
Shankar
-
The AP client or Repeater? What do I need here?
Help, please!
I have a network D - Link Wi - Fi and in my home that meets all my needs very well. I'm trying to expand my network to my store about 100 yards away. I've set up a very robust D-Link access point outside and I see my network in most of the regions on the shop. I would like to amplify the signal out there so I bought a Linksys WPA54G. I am able to connect to the Linksys but I get a notification "limited or no activity. I think I just put point straight up as a Repeater of access to the outside. But maybe the Linksys as a Client AP set up would be a better idea. Is there something special I need to implement? Am I missing something? What is the best way to boost my signal wireless access point 150 yards away?
Thank you all!
If you look at the footnote in AP Mode, you will discover the problem.
Regarding the AP client mode the WAP54G assumes that a single wired client is connected to the LAN port.
Concerning
Fred
-
Terminating the VPN client on 871W
Hello
I tried to install EasyVPN on a cisco 871W by SDM. The goal is to finish the VPN client with authentication with an external RADIUS/advertising (on a local subnet). I implemented the IAS on a win2003 Server advertising and checked the accounts.
SDM was missing the 'crypto map' piece of config. After you add this in the CLI it still didn't work. Thus, EasyVPN is not as easy at is sounds...
Could someone with some knowledge of VPN and IPsec and so forth please look at this config? Maybe it gives me an idea of what I did wrong (which, without a doubt, must be the case).
Thank you
Erik
==
AAA new-model
!
AAA rad_eap radius server group
auth-port 1645 10.128.7.5 Server acct-port 1646
!
AAA rad_mac radius server group
!
AAA rad_acct radius server group
!
AAA rad_admin radius server group
!
AAA server Ganymede group + tac_admin
!
AAA rad_pmip radius server group
!
RADIUS server AAA dummy group
!
AAA authentication login default local
AAA authentication login eap_methods group rad_eap
AAA authentication login mac_methods local
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ipmobile default group rad_pmip
AAA authorization sdm_vpn_group_ml_1 LAN
AAA accounting network acct_methods
action-type market / stop
Group rad_acct
!
!
!
AAA - the id of the joint session
clock timezone MET 1
clock to DST DST PUTS recurring last Sun Mar 02:00 last Sun Oct 02:00
!
Crypto pki trustpoint TP-self-signed-1278336536
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1278336536
revocation checking no
rsakeypair TP-self-signed-1278336536
!
!
TP-self-signed-1278336536 crypto pki certificate chain
certificate self-signed 01
3082024A 308201B 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31323738 33333635 6174652D 3336301E 170 3039 31303237 32313237
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 32373833 65642D
33363533 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
81008B 56 5902F5DF FCE1A56E 3A63350E 45956514 1767EF73 FEC6CD16 7E982A82
B0AF8546 ABB3D35A B7C3A7E3 3ACCB34A 8B655C97 F103DBD5 9AAEFEFC 37A 02103
4EFC398B 0C8B6BE5 AD3E568E 6CB69F87 CBCA0785 EAED0A28 726F2F0A B0B0453E
32E6B3B7 861F87FA 222197DD 3410D8A9 35939E9B CBF95F20 B8DA6ADE BF460F5C
BF8F0203 010001A 3 72307030 130101 1 FF040530 030101FF 301D 0603 0F060355
551 1104 16301482 12444341 4E495430 302E6361 6E2D6974 2E657530 1F060355
1 230418 30168014 84C9223E 661B2EB4 5BAB0B0E 1BE3A27A 64B3AEB0 301D 0603
551D0E04 16041484 C9111E66 1B2EB45B AB0B0E1B E3A27A64 B3AEB030 0D06092A
010104 05000381 8693B 599 70EC1F1A D2995276 F3E4AF9D 81002F4A 0D 864886F7
17E3583A 46C749F9 38743E6F F5E60478 5B9B5091 E944C689 7BA6DCA2 94D2FBD3
AFDE4500 A0A3644E 603A852D 55ED7A87 93501D5C 1662DAED 3FFFEC5A F1C38ED4
E0787561 BA5C14A3 6D065FCF 7DBDEBB6 9186C2D9 AA253FBF A9E38BC3 342C3AC9
2BEF6821 E4C50277 493AD5B6 2AFE
quit smoking
dot11 syslog
!
IP source-route
!
!
DHCP excluded-address IP 10.128.1.250 10.128.1.254
DHCP excluded-address IP 10.128.150.250 10.128.150.254
DHCP excluded-address IP 10.128.7.0 10.128.7.100
DHCP excluded-address IP 10.128.7.250 10.128.7.254
!
pool IP dhcp VLAN30-COMMENTS
import all
Network 10.128.1.0 255.255.255.0
router by default - 10.128.1.254
10.128.7.5 DNS server
-10.128.7.5 NetBIOS name server
aaa.com domain name
4 rental
!
IP dhcp VLAN20-STAFF pool
import all
Network 10.128.150.0 255.255.255.0
router by default - 10.128.150.254
10.128.7.5 DNS server
-10.128.7.5 NetBIOS name server
aaa.com domain name
4 rental
!
IP dhcp SERVERS VLAN10 pool
import all
Network 10.128.7.0 255.255.255.0
router by default - 10.128.7.254
10.128.7.5 DNS server
-10.128.7.5 NetBIOS name server
aaa.com domain name
4 rental
!
!
IP cef
no ip domain search
IP domain name aaa.com
inspect the tcp IP MYFW name
inspect the IP udp MYFW name
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
VPDN enable
!
!
!
username privilege 15 secret 5 xxxx xxxx
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group vpn
key xxxx
pool SDM_POOL_1
netmask 255.255.255.0
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
crypto dynamic-map SDM_DYNMAP_1 1
market arriere-route
!
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
Crypto ctcp port 10000
Archives
The config log
hidekeys
!
!
!
Bridge IRB
!
!
interface Loopback0
10.128.201.1 the IP 255.255.255.255
map SDM_CMAP_1 crypto
!
interface FastEthernet0
switchport access vlan 10
!
interface FastEthernet1
switchport access vlan 20
!
interface FastEthernet2
switchport access vlan 10
!
interface FastEthernet3
switchport access vlan 30
!
interface FastEthernet4
no ip address
Speed 100
full-duplex
PPPoE enable global group
PPPoE-client dial-pool-number 1
No cdp enable
!
interface Dot11Radio0
no ip address
Shutdown
No dot11 extensions aironet
!
interface Vlan1
address IP AAA. BBB. CCC.177 255.255.255.240
no ip redirection
no ip proxy-arp
NAT outside IP
no ip virtual-reassembly
No autostate
Hold-queue 100 on
!
interface Vlan10
SERVER description
no ip address
IP nat inside
no ip virtual-reassembly
No autostate
Bridge-group 10
Bridge-group of 10 disabled spanning
!
interface Vlan20
Description of the STAFF
no ip address
IP nat inside
no ip virtual-reassembly
No autostate
Bridge-group 20
Bridge-group 20 covering people with reduced mobility
!
Vlan30 interface
Description COMMENTS
no ip address
IP nat inside
no ip virtual-reassembly
No autostate
Bridge-group 30
Bridge-group 30 covering people with reduced mobility
!
interface Dialer1
MTU 1492
IP unnumbered Vlan1
no ip redirection
no ip proxy-arp
NAT outside IP
inspect the MYFW over IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP pap sent-name of user password 7 xxxx xxxxx
!
interface BVI10
Description the server network bridge
IP 10.128.7.254 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface BVI20
Description personal network bridge
IP 10.128.150.254 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface BVI30
Bridge network invited description
IP 10.128.1.254 255.255.255.0
IP access-group Guest-ACL in
IP nat inside
IP virtual-reassembly
!
pool of local SDM_POOL_1 192.168.2.1 IP 192.168.2.100
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 Dialer1
IP http server
access-class 2 IP http
local IP http authentication
IP http secure server
IP http secure ciphersuite 3des-ede-cbc-sha
IP http secure-client-auth
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
overload of IP nat inside source list 101 interface Vlan1
IP nat inside source static tcp 10.128.7.1 25 AAA. BBB. Expandable 25 CCC.178
IP nat inside source static tcp 10.128.7.1 80 AAA. BBB. CCC.178 extensible 80
IP nat inside source static tcp 10.128.7.1 443 AAA. BBB. CCC.178 extensible 443
IP nat inside source static tcp 10.128.7.1 8333 AAA. BBB. CCC.178 extensible 8333
IP nat inside source static tcp 10.128.7.2 25 AAA. BBB. Expandable 25 CCC.179
IP nat inside source static tcp 10.128.7.2 80 AAA. BBB. CCC.179 extensible 80
IP nat inside source static tcp 10.128.7.2 443 AAA. BBB. CCC.179 extensible 443
IP nat inside source static tcp 10.128.7.2 8333 AAA. BBB. CCC.179 extensible 8333
IP nat inside source static tcp 10.128.7.3 25 AAA. BBB. Expandable 25 CCC.180
IP nat inside source static tcp 10.128.7.3 80 AAA. BBB. CCC.180 extensible 80
IP nat inside source static tcp 10.128.7.3 443 AAA. BBB. CCC.180 extensible 443
IP nat inside source static tcp 10.128.7.3 8333 AAA. BBB. CCC.180 extensible 8333
IP nat inside source static tcp 10.128.7.4 25 AAA. BBB. Expandable 25 CCC.181
IP nat inside source static tcp 10.128.7.4 80 AAA. BBB. CCC.181 extensible 80
IP nat inside source static tcp 10.128.7.4 443 AAA. BBB. CCC.181 extensible 443
IP nat inside source static tcp 10.128.7.4 8333 AAA. BBB. CCC.181 extensible 8333
IP nat inside source static tcp 10.128.7.5 25 AAA. BBB. Expandable 25 CCC.182
IP nat inside source static tcp 10.128.7.5 80 AAA. BBB. CCC.182 extensible 80
IP nat inside source static tcp 10.128.7.5 443 AAA. BBB. CCC.182 extensible 443
IP nat inside source static tcp 10.128.7.5 8333 AAA. BBB. CCC.182 extensible 8333
IP nat inside source static tcp 10.128.7.6 25 AAA. BBB. Expandable 25 CCC.183
IP nat inside source static tcp 10.128.7.6 80 AAA. BBB. CCC.183 extensible 80
IP nat inside source static tcp 10.128.7.6 443 AAA. BBB. CCC.183 extensible 443
IP nat inside source static tcp 10.128.7.6 8333 AAA. BBB. CCC.183 extensible 8333
IP nat inside source static tcp 10.128.7.7 25 AAA. BBB. Expandable 25 CCC.184
IP nat inside source static tcp 10.128.7.7 80 AAA. BBB. CCC.184 extensible 80
IP nat inside source static tcp 10.128.7.7 443 AAA. BBB. CCC.184 extensible 443
IP nat inside source static tcp 10.128.7.7 8333 AAA. BBB. CCC.184 extensible 8333
IP nat inside source static tcp 10.128.7.8 25 AAA. BBB. Expandable 25 CCC.185
IP nat inside source static tcp 10.128.7.8 80 AAA. BBB. CCC.185 extensible 80
IP nat inside source static tcp 10.128.7.8 443 AAA. BBB. CCC.185 extensible 443
IP nat inside source static tcp 10.128.7.8 8333 AAA. BBB. CCC.185 extensible 8333
IP nat inside source static tcp 10.128.7.9 25 AAA. BBB. Expandable 25 CCC.186
IP nat inside source static tcp 10.128.7.9 80 AAA. BBB. CCC.186 extensible 80
IP nat inside source static tcp 10.128.7.9 443 AAA. BBB. CCC.186 extensible 443
IP nat inside source static tcp 10.128.7.9 8333 AAA. BBB. CCC.186 extensible 8333
IP nat inside source static tcp 10.128.7.10 25 AAA. BBB. Expandable 25 CCC.187
IP nat inside source static tcp 10.128.7.10 80 AAA. BBB. CCC.187 extensible 80
IP nat inside source static tcp 10.128.7.10 443 AAA. BBB. CCC.187 extensible 443
IP nat inside source static tcp 10.128.7.10 8333 AAA. BBB. CCC.187 extensible 8333
IP nat inside source static tcp 10.128.7.11 25 AAA. BBB. Expandable 25 CCC.188
IP nat inside source static tcp 10.128.7.11 80 AAA. BBB. CCC.188 extensible 80
IP nat inside source static tcp 10.128.7.11 443 AAA. BBB. CCC.188 extensible 443
IP nat inside source static tcp 10.128.7.11 8333 AAA. BBB. CCC.188 extensible 8333
IP nat inside source static tcp 10.128.7.12 25 AAA. BBB. Expandable 25 CCC.189
IP nat inside source static tcp 10.128.7.12 80 AAA. BBB. CCC.189 extensible 80
IP nat inside source static tcp 10.128.7.12 443 AAA. BBB. CCC.189 extensible 443
IP nat inside source static tcp 10.128.7.12 8333 AAA. BBB. CCC.189 extensible 8333
!
Guest-ACL extended IP access list
deny ip any 10.128.7.0 0.0.0.255
deny ip any 10.128.150.0 0.0.0.255
allow an ip
IP Internet traffic inbound-ACL extended access list
allow udp any eq bootps any eq bootpc
permit any any icmp echo
permit any any icmp echo response
permit icmp any any traceroute
allow a gre
allow an esp
!
access-list 1 permit 10.128.7.0 0.0.0.255
access-list 1 permit 10.128.150.0 0.0.0.255
access-list 1 permit 10.128.1.0 0.0.0.255
access-list 2 allow 10.0.0.0 0.255.255.255
access-list 2 refuse any
access-list 101 permit ip 10.128.7.0 0.0.0.255 any
access-list 101 permit ip 10.128.150.0 0.0.0.255 any
access-list 101 permit ip 10.128.1.0 0.0.0.255 any
Dialer-list 1 ip Protocol 1
!
!
!
!
format of server RADIUS attribute 32 include-in-access-req hour
RADIUS-server host 10.128.7.5 auth-port 1645 acct-port 1646 borders 7 xxxxx
RADIUS vsa server send accounting
!
control plan
!
IP route 10 bridge
IP road bridge 20
IP road bridge 30
Banner motd ^.
Unauthorized access prohibited. *
All access attempts are logged! ***************^
!
Line con 0
password 7 xxxx
no activation of the modem
line to 0
line vty 0 4
access-class 2
privilege level 15
transport input telnet ssh
!
max-task-time 5000 Planner
AAA.BBB.CCC.ddd NTP server
endErik,
The address pool you are talking about is to assign to the customer or the public router interface? If you want to set up your vpn client software point a full domain name instead of an IP address that you can do it too long you can ensure the use of the name is resolved by a DNS SERVER.
The range of addresses that you can be asigned to your Dialer interface will depend on your ISP.
-Butterfly
-
The VPN Clients cannot Ping hosts
I'll include a post my config. I have clients that connect through the VPN tunnel on the 180.0.0.0/24 network, 192.168.1.0/24 is the main network for the office.
I can connect to the VPN, and I received a correct address assignment. I belive tunneling can be configured correctly in the aspect that I can always connect to the internet then on the VPN, but I can't ping all hosts on the 192.168.1.0 network. In the journal of the ASDM debugging, I see pings to the ASA, but no response is received on the client.
6 February 21, 2013 21:54:26 180.0.0.1 53508 192.168.1.1 0 Built of ICMP incoming connections for faddr gaddr laddr 192.168.1.1/0 (christopher) 192.168.1.1/0 180.0.0.1/53508 Any help would be greatly appreciated, I'm currently presuring my CCNP so I would get a deeper understanding of how to resolve these issues.
-Chris
hostname RegencyRE - ASA
domain regencyrealestate.info
activate 2/VA7dRFkv6fjd1X of encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
name 180.0.0.0 Regency
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
link to the description of REGENCYSERVER
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
link to the description of RegencyRE-AP
!
interface Vlan1
nameif inside
security-level 100
192.168.1.120 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP x.x.x.x 255.255.255.248
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 208.67.220.220
name-server 208.67.222.222
domain regencyrealestate.info
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 Regency 255.255.255.224
RegencyRE_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
outside_access_in list extended access permit icmp any one
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask Regency 180.0.0.1 - 180.0.0.20 255.255.255.0 IP local pool
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM 255.255.255.0 inside Regency location
ASDM location 192.168.0.0 255.255.0.0 inside
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 12.186.110.2 1
Route inside 192.0.0.0 255.0.0.0 192.168.1.102 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
LOCAL AAA authentication serial console
http server enable 8443
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 15
SSH version 2
Console timeout 0
dhcprelay Server 192.168.1.102 inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 69.25.96.13 prefer external source
NTP server 216.171.124.36 prefer external source
WebVPN
internal RegencyRE group strategy
attributes of Group Policy RegencyRE
value of server DNS 208.67.220.220 208.67.222.222
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list RegencyRE_splitTunnelAcl
username password encrypted adriana privilege 0
christopher encrypted privilege 15 password username
irene encrypted password privilege 0 username
type tunnel-group RegencyRE remote access
attributes global-tunnel-group RegencyRE
Regency address pool
Group Policy - by default-RegencyRE
IPSec-attributes tunnel-group RegencyRE
pre-shared key R3 & eNcY1.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:35bc3a41701f7f8e9dde5fa35532896d
: end
Hello
-be sure that the destination host 192.168.1.x has a route towards 180.0.0.0 by the ASA gateway.
-Configure the following figure:
capture capin interface inside match icmp 192.168.1.x host 180.0.0.x
capture ASP asp type - drop all
then make a continuous ping and get 'show capin cap' and 'asp cap.
-then check the ping, the 'encrypted' counter is increasing in the VPN client statistics
I would like to know about it, hope this helps
----
Mashal
-
Hello
just a quick,
TOPOLOGY
ASA isps1 - 197.1.1.1 - outside
ASA ISP2 - 196.1.1.1 - backup
LAN IP - 192.168.202.100 - inside
I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.
is this possible?
Hi Rammany.
In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.
I think n so it will work with your current design.
This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.
Hope someother experts in our forum can help you with that.
-
Option 'The Anyconnect client profile' missing in ASDM
Hello
I am trying to configure Anyconnect on the SAA and have successfully updated licensing, as well as downloaded the pkg anyconnect for web deployment. I activated anyconnect on the external interface and can now have the ASA push the client machine. Works very well. However, I would like to add the backup servers that the client will attempt to reach where the primary is down. I understand that "customer profiles" can be created to customize the parameters as follows. Problem is, when I followed the setup guide with instructions for the manufacture of customer profiles here:
It shows that I should have an option for the Anyconnect Client profile and settings of the Anyconnect Client.
I don't have one of these options in ASDM. Here's what it shows mine:
I have another 'Profiles of Client SSL' option, but it does not appear the same as the above.
Can anyone help with what I have to do to get the customer profiles option to be available, so I can add backup server for the customer information? Thank you!
It could be your version ASDM. I note, however, that the Release Notes for ASDM for 6.3 (1) Note that this version (when combined with the support ASA 8.3 (1)) introduced the AnyConnect profile editor.
You can run the 6.4 (7) Version ASDM curent with your ASA remaining on 8.2 (1). It would not hurt to try this.
A little more awkward alternative is to use the stand-alone profile AnyConnect editor and manually deploy the xml profiles that result.
-
Problem with the CC-Client installation
Hello
I am able to connect to my account. I work with windows 10.
Problem:
CC-client is installed and says "not connected". By pressing the connection button immediately the screen still says "not connected".
I can't remove the CC-client. I received the message of the still some processes work.
Can you help me please?
Karl
< deleted by the moderator >
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Not able to download the instant client
Tried several times. Go to The Instant Client downloads for Mac OS X (Intel x 86). Accept the agreement. Then click on the download link. Get this:
!Sorry
In order to download products from Oracle Technology Network, you must accept the OTN license terms. Make sure that... Your browser has 'cookies' and JavaScript active. You have clicked on "Accept license" for the product you want to download. You try the download within 30 minutes of the acceptance of the license. From here, you can go... Back to previous Page Site map OTN homepage Please report to us. It should now work.
-
NetApp VSC v6.1 UI is missing from the Web Client v6.0u1
I recently updated my vCenter Server 5.5 to v6.0u1 (2k12r2 for Windows with backend SLQ 2012). With that I installed a fresh instance of Virtual Console storage NetApp v6.1. All was working perfectly until I've restarted the vCenter after about 2 weeks of operation of the new version. After you restart the gui NetApp VSC and features were missing completely on the web client. The plugin has always shown as active in the webclient service is, however, no GUI. Strangely when I try to disable the plugin from the web client, it refreshes and remains only set as active.
In heavy client, the icon was always present, however with the new version (6.1), no functionality can be achieved through this and you are just re-directed toward the Web Client of VMware. Backups were still underway at the scheduled time, even if the plugin was not visible in the Web Client.
I tried the following:
The re-registration plugin
-Stop webclient VC services, stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data). Mainly located in the folder of vSphere-Client-serenity
-Departure VC web customer service
-Re-enrollment VSC with VC
All the re - install
-Stop services of VC
-Stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data)
-Stop services VSC
-Do a complete uninstall
-Remove the VSC installation directory
-Reboot server VSC to delete reg keys
-Install the new copy of VSC 6.1
Re-record with the VC Server
The same question is observed. The plugin shows as being installed. The extension "com.netapp.nvpf.weblient" exists in the breast of the https://< vCenter > / mob. (see attached screenshot). The thick client still shows the plugin as permitted, as the web client. I still cannot see the interface user via the web client despite the plugin is installed and activated.
Tear out my hair with it. Any help would be greatly appreciated.
Guys,
An update on this issue, it could be useful to resolve any other issues similar and research...
After 4months our case eventually made its way to the development of the web client team in VMware. The problem has been identified as a corrupted file in vCenter which is responsible for organizing the status "enabled/disabled' plugins customer web. Difficulty as follows:
"C:\ProgramData\VMware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity\ALL\client.package.states.
The solution was: -.
- Delete the file
- Open customer vcentre, administration, plugins
- Disable a random plugin (this forces the State file recreate)
- Exit vcentre and then reopen
- Plugins should now be visible
- Customer goto plugins and re - turn that which has been previously disabled
Good luck guys, it was a serious pain in the ass
-
VUM appearing is not in the Web / Client c#
I have a test environment in which I recently installed VUM 6.0, as well as 6 VCenter. VUM is not displayed to each customer, and I'm at a loss at how resolve this problem at this stage. The form of poster as recorded in the web client.
Please go to the menu Manager of vSphere Client plug-ins, your Crossover plugin could not have been activated.
Right-click on it and activate it.
Maybe you are looking for
-
QuickTime Player cannot be opened because of a problem (macOS Sierra).
I've recently upgraded to Mac OS on my MacBook Pro (mid-2012) and QuickTime Sierra stop working! I can't understand how to solve this problem. Instead, it gives me a screen that says: QuickTime Player cannot be opened because of a problem. Check with
-
installed new hard drive two months ago - just now to reinstall Firefox - installed new version 8 - need to know where my old favorites would be stored (what file and where)
-
Flash ReadySHARE disappeared from network drives
Before I could access flash drives connected to my WNDR4500 (v2) by clicking on 'Network' under 'Computer' on my Windows 7 desktop. Since yesterday, the flashdrives have disappeared in this place. I can access it by opening Netgear genius, clicking R
-
Resize the Windows Server 2003 boot partition
My client has Server 2003 with a RAID. The system volume / start is 12 GB. Right next to this boot on the partition volume is 30 GB of unallocated space. The rest of the disk is allocated to a separate partition in which all their data lives. Can I e
-
What is the best way to one-way synchronization to an external hard drive?
Transfer a large number of files and I want to copy on a hard drive backup periodically (manually) without deleting anything on that hard drive. The problem with just drag / drop is that Windows allows you to copy existing files, just take the useles