Tablet 2 green led always on?

Similar Questions

• BlackBerry Smartphones solid green LED ALWAYS

  Hey, it's really bugging me. I have my indicator of coverage off the coast, I have not new messages/calls/something like that, but there is a solid green LED on my Storm all the time. He has served for the past 3 days. I did a battery pull, and back in the Green LED came on immediately when I put the battery. I let my battery to fully discharge and then recharge completely, so my battery level was anywhere from 0% to 100% and the Green LED was on all the time. I know there was another thread on this forum about a flashing green LED, but mine remains STRONG, so I was hoping that someone would be able to help. Any ideas?

  Well, I had the light turns off. I think that the Green LED continuously when you have a load of 100% and it is still on the charger, so I left it completely load, then took it off the charger and it must have fixed.

• After 32RL933 the firmware update won't start no - green LED lights

  After an update of the firmware via wifi and use the TV for a few hours, when I changed the Source, the TV goes black and reboot, right now the TV is always black, green LED flashing and the screen turns black.

  I think it's a firmware issue, I tried to pull the plug and put back in operation and does not. I have donwloaded a rl933_748304.bin firmware on the site, loaded onto usb and plugged into the TV and does not work, so I think I need a "auto-install" firmware that runs at the start of the TV instead a normal firmware.

  I've read that a lot of people have this problem, I hope that you could give me support.

  Thanks in advance and sorry for my English.

  Try this:
  Turning the TV off. Wait 30 seconds, then press power button.
  Then OFF it again. Unplug the power cable and LAN cable.
  Reconnect the cable LAN and power ON the TV.
  Now reset the TV.
  GO to the system configuration menu, select TV point Reset and press OK to select.

• My Sony Vaio model PCG - 61611L Green LED lights up but nothing happens

  When I turn on my Sony Vaio model PCG - 61611L, the Green led lights up, but nothing goes well. The laptop is 2010 and is never abused, so I don't know what happened. It just started this making times and now I can't turn it on at all. Any suggestions?

  shoemanfl,

  It seems that you have no POST issue.  Is it the caplock/numlock light up when you press it?  Did you try to connect to an external monitor to see if it's a matter of display dim?  If this is no a POSITION, try reinstalling the ram or using one at a time... you can also remove the optical drive and hard drive to see if you can start any found nail system.  If you can not always unity would require service...

• Satellite Pro C660 not turn on - green LED only

  Sorry if this is a piece of cake for you.

  Laptop was overheating. I usually just unscrew a few screws, dig up the lint on the fins, rebuild and everything is ok.

  BIG mistake: I hibernated computer instead of turn off, battery on the left and then disassembled (don't ask me how or why I did it because I don't know)

  A lot of fluff out of fins.

  Reconstruction, button / stop only lights up green LED, screen remains dead, no audio noise, no beeps.

  Took part 3 times now and rebuilt, but can't find a problem.

  Drive in a caddy and saved elsewhere,

  No idea what is going on, or if the laptop is repairable? I feel such a fool.

  Thanks if you can help

  The laptop supports HARD SATA 2.5 drive. Laptops more (no matter who the manufacturer was) supports SATA 2.5 HARD disk and where the HARD drive is OK, you should be able to use it

  but the preinstalled system contains the drivers and the drivers would probably be not compatible with the new laptop.

  That is why it s recommended to move the data to the HARD drive on another source (another 2nd HDD, USB flash stick of memory, etc.) and then do a fresh install of the OS.

• Toshiba 22L1334G - green LED flashing and TV does nothing

  Hello, I have a 22L1334G and I had my tv problem is that every time he has cycled from st - by situation is that the first tuning has been activated that he had just bought. Do you want to download the latest version of the software on the web that corresponds to the version V3, 6 3 and now my camera is left with the Green LED flashes and does nothing. Could someone help me.
  A welcome message

  Same problem with 32L1334DG

• Edge s430 green LED power but will not start

  Hello

  This morning I was browsing the internet, using Skype on my s430 to edge with no problems. The battery got low so I plugged on the power supply, plugged my phone into the usb port to recharge and it left while I got breakfast. When I returned the laptop is not turning on when I open the lid.

  I waited and hit a few keys on the keyboard (it usually does). But nothing... tried pressing and holding the power button / stop for 30 seconds, nothing - no lights, no fans.

  The battery is sealed inside, so I can't do much - I tried unplugging the AC, by pressing the power button 15 times second intervals, then hold for 30 seconds, but no change - no lights, no fans.

  When I plug in the adapter, the Green led lights solid - not flashing do not or anything like that.

  Edge s430 - stock i7 computer 3364cto laptop.

  Any help appreciated.

  Fixed in the case where someone else shows - laptop computer Unplugged, unplugged the wall charger - left both like this for 24 hours all reconnected and tried and it worked - no idea what was wrong but everything works fine now.

• I bought klv-32r402a LED tv. TV just flashes 3 to 6times with green LED, no sound.

  Hello

  I bought SONY-klv-32r402a LED TV a month ago, expecting a good quality of SONY. But TV no longer works since yesterday, it continues to Flash with green LED, when I press the power button / stop. Initially, green LED Ligh flashes 6 times, then 3times. Now flashing only 1 time, showing the SONY logo on the screen, then no sound or picture on the screen. Can someone help me please?

  Thank you, Angela.

• HP Pavilion m9066 green led flashes

  Hello!

  I have HP Pavilion m6099 and nothing happens when I press on at the power switch. At the back of the power supply the Green led flashes when the power cord is connected. When I take off the motherboad main supply cable stops flashing and led a continuous green light. When I connect MB power cable flashes again begins.

  Can I determine this behavior that PSU is ok and the problem is in the MB, CPU, memory, etc. I tried to remove all of the cards memory one by one, but still flashing continues. I have no tools to test the PSU.

  It flashes continuously, without interruption, etc..

  Do you have any other suggestions how to proceed?

  BR

  Laakspen

  laakspen,

  This is a normal situation. There is a discussion. Read through all of the first page. The discussion involves the diagnosis of the PSU and a hair dryer.

• BlackBerry Smartphones green LED when the load

  Hi all

  I wonder if you can help me, I charge my phone in its cradle every night in the bedroom. I had to turn in bedside mode when charging. Problem is that if I keep the phone then I get notification sounds when you receive emails etc. If I turn off the phone and docked I get the Green solid light that lights up the room when completely loaded. So any info on the following:

  1. disable the Green LED when loading?

  2. can I configure bedside mode to enter in silence?

  3. can I plan a silent mode to switch at some point?

  Thanks in advance

  Creeky

  I have my bedside mode configured to turn off the wireless radio. In this way, I don't get the emails until I turn radio wireless (at the exit of the bedside mode).

  Another thing to do, is do not use the charging base, but using the cable plug and return your phone so that the light is directed downwards and not upwards.

• Green LED on blackBerry Smartphones

  What does the flashing?

  The flashing green LED indicates that you have a mobile network coverage. You can disable it in the Options > keyboard/screen.

• I tried Flash Focus on my TV and it gets close convergence, but green is always out of t

  I tried Flash Focus on my TV and it gets close convergence but the Green is always out of the right alittle bit. Is there a service mode I can go in to adjust it manually. Thanks for the help. Sony KP-48V90 TV

  I tried Flash Focus on my TV and it gets close convergence but the Green is always out of the right alittle bit. Is there a service mode I can go in to adjust it manually. Thanks for the help. Sony KP-48V90 TV

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• Satellite L500 is OFF and the Green LED flashes if hooked on sector

  Help!

  I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else

  Hello

  What indicator do you mean exactly?

  DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

  The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

  Also if there is a failure of memory Power LED repeatedly flashes
  0.5 sec and off 0.5 sec
  If there is a problem with the slot A the LED flashes two times orange then green once
  If there is an error in the B slot, the LED flashes orange green once then twice
  If there is error in the slot A and B the LED flashes two times in orange and green.

  But if the power light flashes green only, I guess there is a motherboard problem.

• Turn on RED/GREEN LED if PASS/FAIL

  I have a sequence with three jacks, and I need to make a Visual sign for the operator one per Socket.

  I put a LED by socket (dual color), and I need to turn RED or green, depending on whether the Socket [x] success or failure.

  I am running in parallel, so each is independent of the others.

  Any body can give me an idea?

  Thank you guys!

  PD: I know how to enable / DISABLE the LED, I just need to know how to choose RED or green depending on the result...

  In the reminder of your file PostUUT, sequence or directly in the sequence of process model you can check the result of the object to measure and update the corresponding LED based on RunState.TestSockets.MyIndex.

  For example:

  Locals.whichLed = FileGlobals.MyLEDs [RunState.TestSockets.MyIndex]

  Then call a code module to do the update of the material:

  UpdateLEDState (Locals.whichLed, Parameters.Result.Status)

  Hope this helps,

  -Doug