Toshiba 22L1334G - green LED flashing and TV does nothing

Similar Questions

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• HP Pavilion m9066 green led flashes

  Hello!

  I have HP Pavilion m6099 and nothing happens when I press on at the power switch. At the back of the power supply the Green led flashes when the power cord is connected. When I take off the motherboad main supply cable stops flashing and led a continuous green light. When I connect MB power cable flashes again begins.

  Can I determine this behavior that PSU is ok and the problem is in the MB, CPU, memory, etc. I tried to remove all of the cards memory one by one, but still flashing continues. I have no tools to test the PSU.

  It flashes continuously, without interruption, etc..

  Do you have any other suggestions how to proceed?

  BR

  Laakspen

  laakspen,

  This is a normal situation. There is a discussion. Read through all of the first page. The discussion involves the diagnosis of the PSU and a hair dryer.

• D820 and I woke up and I'm going to turn on my dell and it does nothing.

  Hello

  I have a dell latitude D820 and I woke up and I'll turn on my dell and it does nothing. I plug the charger in and go to plug in on my laptop charger port and my charger all I blink (my charger has a green light when I plug it in), thanks

  UH I think you need to contact Dell...

• I click on "Download trial" and it does nothing?

  I click on "Download trial" and it does nothing?

  We do not know anything. Call your vague post would be an understatement. Information system? Browser? Installation of the Internet? As a first step, refer to this:

  Direct download links for Adobe software

  Mylenium

• Satellite L500 is OFF and the Green LED flashes if hooked on sector

  Help!

  I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else

  Hello

  What indicator do you mean exactly?

  DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

  The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

  Also if there is a failure of memory Power LED repeatedly flashes
  0.5 sec and off 0.5 sec
  If there is a problem with the slot A the LED flashes two times orange then green once
  If there is an error in the B slot, the LED flashes orange green once then twice
  If there is error in the slot A and B the LED flashes two times in orange and green.

  But if the power light flashes green only, I guess there is a motherboard problem.

• my CD does not open. The green light flashes but its does not

  I have a hp workstation xw4200. It had not been used since 2004. When we first turned the computer on the CD works perfectly. We even made a cd of music on it. But this computer needed some serious updates and since we have updated of pilots and other things, it did not work. The Green led comes on like its something but it does not open and it says that there is no cd inside.

  Here are a few ways to open the drawer with a CD/DVD with a stuck CD/DVD player,

  1. Open Workstation , and then search for your CD/DVD drive and right click and select eject.
  2. Get a paper clip and one end on open if you have something to dig with. Look on the front of your CD Player for a very small pin hole.

     
     Place the open end of the paperclip into the hole of a PIN and push gently but firmly keeping it perpendicular to the front of the player.

  I think you get some success on one of these methods. The last one is usually reserved for out a totally defective CD/DVD disc.

• BlackBerry Z10 Z10 led flashing and the software update error code

  Hi, forst time poster and beginner, so please be nice!

  I got a Z10 for three months and today, I could not turn it on and light flashes 1-3-1 sequence.  I plugged on Blackberry link to perform a restore, and I now get an error on Blackberry link code: cannot repair because of the error: BDSLSV2RequestURL.  Any thoughts?  My carrier wants to remove it for repair, but if I can fix it, I would be happier.

  Thanks a lot for your help!

  Chris

  I think that LED Flash 1-3 is a bad battery...

• HP g6t - 1B 00 CTO: charger indicator led flashes and is white in color

  I replaced the battery with a new battery Duracell yesterday.  I need to load at least 4 hours first then it unloads.  When the charging light is usually yellow, but after about an hour on the charge, it starts flashing and the white color changes.  This is the second battery.  He did almost the same thing with the other, but also incorrectly read indicator.  What can I do to fix this?

  Thank you

  The replacement of the Duracell battery did not work.  I tried recalibrating several times and ended up with the same question.  I recently had a replacement for Duracell on another HP and it worked fine.  I will be chalked up the differences between the two laptops I have.  I have to replace HP and it works fine now.  The only real question there I can't order the most sustainable one because he is no longer offered by HP.  A small trade off the coast.  Thanks for the help.

• Tecra 9000 - LED flashes and cannot start

  I recently got an old laptop Tecra 9000. Unfortunately, it doesn't have a HARD drive (it was taken and sacked by the former owner).

  I bought some hard drives that I thought should work in this machine, but all that seems to happen is that the power light blinks 7 times, pauses, then flashes once (and then repeat this.

  I guess it's an error code any.

  Readers, I've tried are a MK4025GAS and a MK4026GAX. The result is the same on both.

  Can we say what means this error, or even tell me the part number of a disk that is compatible with this machine?

  Thank you very much.

  Hi Guy

  One question; have you tried to power the laptop without inserting the HARD drive?
  Usually if the laptop is ok, it should be possible to boot the laptop. Of course the laptop will not load the Windows operating system because the HARD drive is missing but it should be able to start and the led must Flash not!

  But if it flashes, it means that the fault was detected on the motherboard and the LED lamp sends a blink code.
  Short blinking means 0 and 1 long flashing
  Error code starts with LSB (least significant bit)
  for example:
  0000 0001-> 1000 0000

  This code you need to turn it into hex and you will get the error code.
  But in my opinion, no one will give you an answer what it means.
  Each laptop clean error code series offer...

• I downloaded adobe flash and still does not...

  I have updated my Firefox and Google Chrome and Adobe Flash 3 times but the plug ins don't always work.

  There are two different versions of Flash for Windows, ActiveX for IE version and the version of the plugin used by Firefox and other browsers.

  1. download the Setup file of Plugin Flash version here:
  
  Adobe Flash - 32-bit version of the Plugin.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

• KDL-60NX720; Launched the browser WEB and TV BRICKS! 4 RED flashes and support does not work

  I had this KDL-60NX720 for about 4-5 years, solid as a rock. Rarely used TV Apps, hooked up to Roku and looked at from time to time of movies in 3D from NTS Network Sony TV APPs.

  Today, I went on television and launched WEB TV browser, BIG MISTAKE. The State of TV bar off for 5 minutes, so I decided to turn off the TV and went outside. Came back a few hours later and the TV is over BRICKED.

  Flashing lights RED (4 times, pauses, repetitions). Turns on for 2 seconds, then turns OFF, can't the factory reset. Same sequence of flashing. Uplift of my entertainment system all unplugged each HDMI cord and followed every possible diagnosis Voodoo that Sony has recommended.

  Called and chatted with support. Downloaded the firmware on USB and plugged into the back. Waited 30 minutes. Same question above. Now 4 hours later, my life is in disarray and the TV is dead. Live sports game is on Roku and cannot look at anything. It's the weekend, Sony support just went offline.

  Past $ 2500 on this TV. Now I think if Sony will be able to help, or carry this TV from the wall bracket and drive him to the technician that will require more than a new purchase.

  What do Sony?

  Thanks for sending the link to United States service centers. According to my note, I live in the Canada.

  And have already looked at service Canada, 3 of the 4 centres centres have some negative reviews on Google. Not sure if Sony addresses the quality of service to their partners as well.

  End of the road for another loyal customer of Sony and all of its network and friends/family. Too bad.

• Erase written and writing does nothing...?  Help please.

  This is my first post, so please guide me if I am doing this wrong.  I did a search on the forums and found a person who had this same problem, but they did not provide enough information for anyone to help them and there has never been a solution. So, I'll try to be as complete as possible.  I'm not computer savy once again, bear with me.

  I have Windows 7 and Photoshop CS6 I bought today.  I was playing around with new brushes, that I downloaded today and all of a sudden they stopped working.  They would not write and then I had this idea that maybe they were erasers and not writables (not sure where that thought came, but she appeared in my head).  Although they do not erase, they wrote and not in my primary color.  Then when I went to show my husband... all of a sudden, they worked properly.  Then I went on my merry way to play with my new brushes and they broke again.  I'll try to include pictures here but I'm not very good at HTML.  It just seems easy to show you what's on my screen than to describe it.

  The first image is so when I used my brush as Brush tool as you can see.  I had to zoom in so you can see how many pixels he actually wrote.  As you can see, the brush is much larger.  This is the second time, he did.  The first time, he wrote many more pixels, actually looked a bit cool with this kind faded ink to look at it.  In any case...

  

  The second is what happened when I tried to erase my coloring.  As you can see, he choose the secondary color.  I don't quite know why he would choose this color of all colors.  As I said, I know nothing about computers and I am learning to Photoshop.  As far as I know, I accidentally hit a key causing all this mess myself.  Any help would be greatly appreciated.

  

  If you need anything just let me know.  Thank you.  ~ Harvest

  Hello, harvest, I will try to answer your question for you...

  You must have accidentally activated the size of the brush downwards so you could not 'write' number of pixels. You can increase the size to the top by pressing on '] ' and it decreases with "[]".

  Or you can follow my screen turned down here to set the brush size dial.

  

  As for the Eraser tool...

  You work on the background layer. At the same time, you had the yellow background color. Take a look at the area that I circled in my image. My foreground color is black, which is my color of the brush. My background color is red, which is my color of the eraser. Usually, I have my background color set to white. But when you work on a layer above the background layer, the region that you delete is enabled transparent

  

• Corrupt Installation and reinstalling does nothing

  I tried to install the suite of circuit design on another partition on my laptop Windows 10. Installation has been successful, but trying to run multisim, an error message saying it was corrupt and to reinstall appeared. I uninstalled via the control panel of program, but she advised me that there not uninstall correctly. Now, when I try to install it, it says its already there and nothing installs really and there is no directory program files. I tried to manually delete the files, but nothing has changed.

  I managed to solve the problem by forcing a reinstallation. See the link below. I just wish that this link was most visible, or NEITHER actually reinstalled in default or offered by a button in the user interface to do this.

  http://digital.NI.com/public.nsf/allkb/ADD22E807D5A12AD862579EC00760F79?OpenDocument

• right click on "Devices and Interfaces" does nothing

  Hey all,.

  I am trying to add a raw TCP VISA OR max socket.  When I right click on "Devices and Interfaces", the line is highlighted and any drop-down list appears, much like a left click.  However, when I right click on 'Software', the drop-down list appears.  I have all the software AND up-to-date. Is there additional software, that I should add (I NI-VISA 5.4 as well as the watering duration) visa?

  Thank you

  Matt

  I think I know what is happening.  It seems that you have just the duration of OR-installed VISA, but not the NI-VISA full supports, which includes additional support of MAX configuration.

  With the new version of MAX 5.5, devices will appear with the help of configuration limited when you have only the version of the installed driver running as opposed to in the past when nothing arise.

  Here is a link to the full installer 5.4 NI-VISA - http://joule.ni.com/nidu/cds/view/p/id/4230/lang/en