Tablet not charging no more than 5%

Similar Questions

• It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong

  Whenever I plug my charger into my iPhone more 6 seconds I get a pop that says this accessory may not be recognized and will not take a charge. It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong? And why won't my charger. I also have another charger at work that the phone recognizes even plug me the charger in but that works well on a co-workers phone. Suggestions?

  Help here > power adapters using iPad with iPhone, iPad and iPod - Apple Support

• Acer Aspire 5349 began to stop randomly, now can not stay on more than 2 seconds

  Hello world!

  I use my 5349 aspires for more than 4 years now running Windows 7. A few months ago, he began stopping at random - sometimes after an hour of work, other times - after 10-15 minutes.

  It is used mainly for light office work, but given his age, I decided it was due to the accumulation of dust or otherwise overheating due to thermal decomposition paste to the processor and the thermal pads - for the video chip. It is out of warranty, so I disasembled he replaced even if the thermal paste compound and the thermal pad seemed OK. There was no dust important problem as well, in any case seized the opportunity to thoroughly clean.

  After assembling and switching on, it ran stable for 3-4 hours which even helped me put upgraded to Windows 10 (32 bit). He rested for a few days due to the holidays here and then when turned on - again closed in about 10 minutes. After that no matter what I do - perform disassembly, check for loose contacts, CMOS battery, laptop battery, etc.-, he could not run for more than a few minutes from the Windows recovery and then stops again. In the last days it even can't stay for more than a few seconds before stopping again, so I can not even get into the BIOS.

  Laptop battery is good, because it has always been used as a desktop replacement, in all cases tried with battery and battery off nothing works. The power brick is one that came with it originally, even though it says LITEON instead of ACER. Tried another one with the same voltages and amps for an another ACER laptop - the situation didn't improve or change at all.

  Logically, I started reading here and discovered on exactly the same problems with other similar models, so I tried all the suggestions - replaced RAM, HDD, DVD, tried to boot from USB or DVD, tried to remove the build-up of electrostatic charges. I'm very suspicious of the latter, or any electrical problem / might like, because when I completelly demolish the mobile nut, i.e. by removing everything that can be removed and then back - it works for 10-15 minutes before closing.

  So, finally, the question is - is there suggestions that I could follow?

  The easy solution is to replace the MB in case it would help, or the completely portable, but I hate when I don't understand or diagnose a hardware problem and will make every effort to identify and resolve.

  See you soon!

  Google the keywords "5349" "mainboard" or "motherboard". Replacements to run $100 inc shipping, some on ebay U.S. and other China.

  Jack E/NJ

• why I can not go back more than once all of a sudden and double letters are not allowed?

  I have to reset the cursor to go back more than once and nothing can hit twice (the second will not be displayed) very very frustrated!

  Hello

  1. You did changes to the computer before the show?
  2. Is - this USB keyboard or wireless?
  3. What is the brand and model of the computer, the mouse and keyboard?
  4. What version of Windows are you using?
  5. The issue is limited to a particular application?

  Please follow the steps below.

  
  Method 1:
  Run the troubleshooter mentioned in the link below
  Windows Vista http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Windows 7: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2: Check the boot issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  NOTE: After completing the troubleshooting steps, please reset the computer to start as usual (see the STEP 7 of the article mentioned below)

  I hope this helps!

• notifications of delivery doesn't have an account who have not used for more than one year

  Help

  Recently I received a now defunct work e-mail delivery failure notifications, which did not use more than a year, what can I do to stop these notification of delivery failure. This is back with all of my incoming emails. no rule of message didn't put in place for this address, and as it's my former work e-mail address, how to stop what is happening? sxlireland.

  Hi sxlireland,

  ·         E-mail are what customer you referring?

  ·         This message occurs with all email addresses or specific email address?

  If you use windows live mail or hotmail, you can reference in the windows live forum.

  Windows Live Forum - http://windowslivehelp.com/

• Windows update problem update 3 of 3 - system will not display anything more than 0% finished and continually reboots over & above.

  I recently downloaded an "update" to the computer of my son (who is from Vista Premium), the system is locked on the 3 of 3 update - system poster not didn't any what more than 0% finished and restarts constantly on & above. I can't seem to break the chain of the system update & I don't have a recovery disk. All that I can do rather than scrap the computer?

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358  
  Method 2: Start the computer in safe mode and then use the system restore feature

• RAM Dell XPS one 2710 question does not start with more than 2GB of ram

  Hi, I recently updated to Win10 I've taught it will be easier way for installation after upgrade fees, but the reset button does not work so I decided to return to 8.1. I copied version UEFI victory to USB and restarted the victory while pressing F2, but the computer does not restart "just black screen even no Dell logo" so I turned it off, back on and same story. Then I disassembled the pc and know that no matter what combination I do the computer not start until there are just 2 GB or less ram in slot I have 1 x 4 GB 3x2GB and 2x1GB any variation as possible, you can imagine I tried close up with the same result. If there is more than 2 GB of system ram won't start. No idea where is the problem? for 2 years this computer worked perfectly.

  PS: Does anyone know how to reflash the BIOS I have spin A12 which is the most recent, but I want to just make sure that the BIOS is not messed up. DELL utility allows not only update reflash. Does anyone know how to force the upgrade of BIOS?

  So I found the problem, it's a BIOS. I tried to reset it in PIN on MB and it did not help removed battery no change I found that the BIOS utility can be forced thru cmd. So I did and the finishing of the bios update successful she even seems scary cos for any computer freezes. but that came on and after several early I can again use all the RAM slot with what ram size I want.

  How to force the update of the BIOS...
  Open cmd as administrator
  and run the exe with command extra /forceit in my case "A12.exe /forceit".
  Voila BIOSupdate is running

  Simple but time fly. hope it helps someone too.

• WIndows now thinks it's not authentic after more than two years.

  I've been running Windows 7 Home Premium (64 bit) for more than 2 years - there was delivered pre-installed on a new computer.

  It has been activated very quickly after I started using it.

  In the last days he began to saying that "this computer is not running Windows genine.

  All relevant updates have been applied on a regular basis.

  Why it suddenly changed in this way?

  I don't think I got a virus infection.

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• Get Windows 7 is not genuine for more than 6 months on laptop

  I have Windows 7, I bought with an Advent Roma 3000 laptop from PC World over 2 years ago.  For more than 6 months now, I get a message that my Windows is not genuine and there is a message in bottom right of the screen "Windows 7 Build 7600, this copy of Windows is not genuine."  IT IS!  I've been to PC World, which just re-installed Windows 7 and said if it happens again I had to do it myself.  I've done 4 times and each time after about a week, it happens again. I bought it in good faith.  Obviously a MS update changes the status of Windows.  I've had enough, and if I can't sort I will soon buy a new machine, which will be an Apple because MS doesn't give a sh * t.  I tried to contact them, nothing works!

  You can also try the following:

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• I sent a file to an email address and they did not, it was more than 2 hours, why have they not yet received?

  I sent a file to an email address and they still have not received it yet, it has been more than 2 hours, why have they not yet received?

  There could be several reasons. Why not send the file directly from your email client (I assume you tried to use the e-mail option in Acrobat that sometimes is not configured to work with your system). In the past, Acrobat requires a MAPI connection to use electronic mail.

• When you use the Polygonal Lasso with 13 elements, I get the message 'no pixels are not selected to more than 50% ' why and how to remedy?

  When you use the Polygonal Lasso with 13 elements, I get the message ' WARNING: no pixel is selected to more than 50 percent. "  Why - and how to fix it?

  Make sure that the correct layer is selected.

  Decrease the amount of feathers.

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• IPad pro cable loading safely able to charge phone more than 6 s.  I noticed that it is thicker than the iPhone cable

  MY pro iPad charging cable is thicker than the iPhone cable loading.  It will damage phone if I used it to charge the phone

  the thickness of the cable have no impact on the load so not

• Apple Watch without charge for more than 1 month.

  So I have not loaded my Apple Watch in 1 month, and when I tried to load, I loaded 3 days in a row and it still won't turn, no, it is not the charger, I tried force restart with digital Crown and side button and still nothing, then I was stupid enough to cancel the twinning of the Apple Watch with my iPhone thinks it would work somehow , and now I can't reset it, so dumb. I can't connect to iTunes either, I'm so lost and confused, I just had this Apple Watch for about 2 months for my birthday and I don't know what to do. I have tried every thing on the web to force reboot to restore the entire Apple Watch. Please if anyone knows, please tell me, literally I am desperate for your help, thank you in advance.

  Hello

  Given the steps you've already tried, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  http://www.Apple.com/retail/Geniusbar/

• Second battery charge no more than 29% on Portege R200

  Hello

  I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

  I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

  Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

  Thank you much in advance.

  Hello

  Looks like a malfunction of the battery to the battery performance and life is limited
  After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

  I think that you should simply replace the battery with a new and check if it helps to solve your problem!

  See you soon