TableView Single Cell selection style

Similar Questions

• value of single cell

  I use numbers to keep a register of photographs, location in a column, photos taken in a separate column, the third column is the total number pictures.  I use a single cell for each individual entry with the location separated by 'alt < CR >', even with the number of photos.  How in the cell in the third column can I get the total, i.e. is there an applescript or function that will return the value (SUM of the numbers in a single cell, separated by ' alt < CR > ""), 2 'alt < CR >' 4 ' alt < CR > 3 ' < CR > alt and enter automatically the number 9 in the third column?

  Cell 2

  Welland 2009 WOODCOTE 2010 Winston 2016

  2 4 3

  9

  Thank you

  It's something you can do in AppleScript.  It is also possible in the number directly, but is much more complicated.

  I would like to ask if you intended to enter the data in the rows since that would be easier in addition to a title and you allow more flexibility in the information that you can retrieve the data that you entered?

  

  In this example, I've separated each field in its own column and then summarizes the data in a separate table

  In the lower table (entitled "Summary of the cell")

  Enter the number of cells in column a.

  Then select cell B2 and type (or copy and paste it here) the formula:

  = IF (counta (a2) > 0, SUMIF (Image, Image Details::A, A2, Details::D), ' ')

  shortcut for this is:

  B2 = if (counta (a2) > 0, SUMIF (Image, Image Details::A, A2, Details::D), ' ')

  Select cell B2, copy

  Select the cells B2 at the end of column B, paste

• Paste multiple lines of text in a single cell in a table

  Hi all

  I lost it by train for formatting columns and thought it would be easier to put the data in a table.

  I tried selecting my 5 lines (name and address) and paste it into a single cell of a table, but it keeps splitting up to more than 5 cells.  Is any way to replace it?

  Thank you

  Hey Shorty,

  Select the 5 lines of text and copy (or cut).

  In a table cell, click twice to place the cursor in the cell (the cursor is now in the text layer of the cell).

  Dough.

  

  Kind regards

  Ian.

• Can LabVIEW VIs database connectivity write an array to a single cell?

  Hello world

  I wonder if DB tools insert data VI is able to accept a table as its input. It's a bit difficult to say because all connect you to the input of this VI is voluntarily accepted by the terminal, data type variant so no glaring broken threads occur when associate you a table.

  What I'm trying to do, it is write a table 2D of doubles in a single cell in a table. The table is large 3 x 1000 elements. I confess to being completely new to databases and such an effort may or may not look ridiculous in the database world. If someone wants to talk about why I'm trying that I'll gladly go through my reasoning - just enough to say that I'm not totally crazy.

  When I try to write the table to a single cell, an error as seen in the attached screenshot. All my other functions database, working with scalar values of many different types of data, all work very well.

  I have attached the problematic code. It tries to write these tables 8 to 8 individual columns, all in the same line. I'm just using the method "automatic" for now.

  Extra tid bit of information:
  OpenSQL database. Connection via ODBC 5.2 64 bit, user DSN.

  LabVIEW 2012 not SP1. Windows 7 64-bit.

  Thank you all!
  Rhys.

  Convert the table to a spreadsheet string and store it like that.

  

• How to display row values in a single cell, separated by commas?

  Hello
  I have a table of opportunity and at every opportunity, there are several values from the provider in the table Vendor, i.e. relations ship between the table of the opportunity and the seller, the table is 1:m.
  In the reports, I want to show all providers for the occasion in a single cell, separated by commas.
  For example Oppty1 has Ven1, Ven1, Fri 3 in table.so of sellers in reports that it should show as
  
  ________________________
  Opportunity | Seller |
  ________________________
  Oppty1 | VEN1 Ven2, Ve3 |
  ________________________|
  
  Please help me with the approach of implementation, I have to take for it.
  
  Thank you
  Anamika

  Visit this link,

  Re: Display of the horizontal values

  Thank you
  Vino

• Problem of format of letters in single cells

  Hi, question maybe an IE6 and not DW8...
  I built a calendar using tables with individual cells. The numerical values are sitting nicely in their cell, but the header cells (M T W T F S S) even if OK in DW8 extend downwards by a single cell in IE6. I guess that's a white character and would like to lose! Any ideas please on how to solve this problem would be appreciated. I am not not familiar with CSS and hope that there is an alternative that I can use. Regards, Barry

  November 28, 2006 to macromedia.dreamweaver, barryc433 wrote:

  > I built a calendar using tables with individual cells. The
  > numeric values to sit
  > nicely in their cell, but the header cells (M T W T F S S)
  > even if OK in DW8 extend downwards by a single cell in IE6.
  > I guess that's a white character and would like to lose! Any
  > thoughts please on how to solve this problem would be appreciated. I have
  > am not not familiar with CSS and I hope that there is a
  > alternative I can use. Regards, Barry

  > You can see if you check out the following -.
  > http://www.paradisecityrentals.com/calendar.htm

  Try to get rid of the

  tags in headers.

  --
  Joe Makowiec
  http://Makowiec.NET/
  E-mail: http://makowiec.net/email.php

• Form field: the user selects a single cell in a table?

  I have a table I'll turn it into a form where the user can select multiple cells. When the user is finished, it will present in the usual way.

  I want the user to be able to select multiple cells, and have sectionals outlined in red, by the small illustration that I've included here. I can't seem to find a way to do it, even if it is obviously very simple. Ideas? The table below is just a mock-up of what I want the form to look like after the user has selected the cells which are framed in red. Borders appear only when the user has clicked on it.

  DRM for your suggestions!

  If these cells will be interactive form fields, the user will not be able to select several fields at the same time. What is possible change the border color when the user clicks in a field while holding down a modifier (shift, Ctrl) key. A simple example, the following script into a text field Mouse Up event will change the border color of the field to red when the SHIFT key is pressed while clicking on the field, but the change will be apparent once the field has lost focus. He will return to transparency if the SHIFT key is held down while you click on the field:

  Script mouse upwards to the text field

  event.target.strokeColor = event.shift? Color.Red: color.transparent;

• Extraction of text from the strings in a single cell of a row of cells

  Hello

  Is there an easier way to search a text / word of a string in the row of cells, and where a match is found back a header text - see the example below.

  

  The left table contains the initial positions of conformity in groups of companies. I would like to complete the table on the right with compliance positions indicated in the table on the left, using the header text (red zone). Example 1 shows that "C company" is not in line with the left table and returns a "Non-compliant" in the relevant cell for company C. Example 2 A company, C and Z are in line with the left table and returns "comply" in the relevant cell in company A, C and Z respectively. It goes the same for the partial.

  The lines must also be aligned as shown in the left column will contain a single reference (not shown in the example).

  My current approach was to simply build a small matrix and use IF (COUNTIF ($E5, "* company A *" "'), 'In line'," "") - this works fine, but is a bit messy - obtained above table, it's really what I like o would reach.

  I also tried to use nested 'FI', 'find', 'Index' and 'Match' combinations, based on a few positions at the beginning, but not could not get the correct syntax.

  Would appreciate other solutions for the construction of the table to the right.

  Thank you in advance...

  Pasel

  This may work for you:

  

  A2 = if (COUNTA ('Table 1 - company compliance Positions': $A2) > 0, IF (LEN ('Table 1 - company compliance Positions': $A2) −LEN (SUBSTITUTE ('Table 1 - company compliance Positions': $A2, A$ 1, "")) > 0, 'table 1 - company compliance Positions': $A$ 1, ' '), "") & IF (COUNTA ('Table 1 - company compliance Positions': $B2) > 0, IF (LEN ('Table 1 - company compliance Positions': $B2) −LEN (SUBSTITUTE ("table 1 - company compliance Positions")) ((((: $B2, a$ 1, ' ')) > 0, "table 1 - company compliance Positions": $B$ 1, ' '), "") & IF (COUNTA ('Table 1 - company compliance Positions': $C2) > 0, IF (LEN ('Table 1 - company compliance Positions': $C2) −LEN (SUBSTITUTE ('Table 1 - company compliance Positions': $C2, A$ 1, "")) > 0, "table 1 - company compliance Positions": $C$ 1, ""), "")

  It's shorthand dethrone select cell A2, and then type (or copy and paste it here) the formula:

  = IF (COUNTA ('Table 1 - company compliance Positions': $A2) > 0, IF (LEN ('Table 1 - company compliance Positions': $A2) −LEN (SUBSTITUTE ('Table 1 - company compliance Positions': $A2, A$ 1, "")) > 0, 'table 1 - company compliance Positions': $A$ 1, ' '), "") & IF (COUNTA ('Table 1 - company compliance Positions': $B2) > 0, IF (LEN ('Table 1 - company compliance Positions': $B2) −LEN (SUBSTITUTE ("table 1 - company compliance Positions")) ((((: $B2, a$ 1, ' ')) > 0, "table 1 - company compliance Positions": $B$ 1, ' '), "") & IF (COUNTA ('Table 1 - company compliance Positions': $C2) > 0, IF (LEN ('Table 1 - company compliance Positions': $C2) −LEN (SUBSTITUTE ('Table 1 - company compliance Positions': $C2, A$ 1, "")) > 0, "table 1 - company compliance Positions": $C$ 1, ""), "")

  Select cell A2, copy

  Select cells A2 at the end of column F, dough

• Return all column names of the cells that match a value in a single cell

  

  I want to be able to scan all the cells in column 1 in column 3 (there could be several) which belong to the same line and check if they all have a value y (X). If they have no value, I want all columns to display all the names of the matching columns as follows: "column 1, column 2" for Elemento.

  This can be a good start:

  

  B2 = if (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  Select cell B2, copy

  Select the cells B2 the bottom of column D, dough

  To add additional columns, you copy the atomic unit:

  & IF (COUNTA (D2) > 0', '& D$ 1,' ')

  and update D2 with the new column and D$ 1 with the new column.

  then... If you add a new column (G, for example) that you want to change it:

  and IF (COUNTA (D2) > 0', '&D$1,' ')

  TO

  and IF (COUNTA (G2) > 0', "&G$1," ")

  and the updated formula would be:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', ' & F$ 1,"") & IF (COUNTA (G2) > 0', '& G$ 1,' ')

  fill down like before

• Count multiple responses in a single cell

  I have a spreadsheet with data in an investigation. Some questions have more than one valid answer. In these cases the data were entered in the same cell. So, I have a column that looks like this:

  Green, blue, Red

  Blue, Orange

  Yellow, green, blue

  Black, green, red, Orange

  And so on...

  I can't understand how to count the number of 'Green' for example.

  In excel I use this formula:

  = SUMPRODUCT (-IsNumber (Search (text_to_find, within_text)))

  I try to convert it to changing number ISNUMBER (for NOT (ISERROR (but does not work.))

  What I am doing wrong?

  I would solve you the problem like this:

  

  Make sure that the table has two header lines by selecting the table, then using Table formatter:

  

  Now add the colors all row 2 of the table, as shown.

  B3 = if (a3≠"", Len ($a3) ≠Len (Substitute($a3,B$2,) "", namely "))," ")

  It's shorthand dethrone select cell B3, and then type (or copy and paste it here) the formula

  (= IF (A3≠"", LEN ($A3) ≠LEN (SUBSTITUTE($A3,B$2,) "", namely "))," ")

  Select cell B3, copy

  Select cells B3 at the end of the G column, paste

  now to count the occurrences of each color:

  B1 = COUNTIF (B, TRUE)

  Select cell B1, copy

  Select cells B1 to G1, dough

• can I add a serial number to a single pass selected to the test

  Hi, I have a number of tips that I test which are marginal passes or marginal failures and wish I could re - test failures by running the test steps pass / single selected and adding the result to the map existing under the same serial number result of UUT (unfortunately the test together take 20 minutes so it would be much faster I could re - test just the test that failed).

  I know that you can add results under the same serial number, but don't know if you can add a single test to this same result.

  At least, it would be good that I was able to store the individual result by using the serial number of the object to measure

  Thank you

  Chris

  Thanks, that's great.

• Deactivation of prediction of single letter selected in InDesign

  Since the last update, when I select a single letter of the text, say, to change a lower case 'a' in capital letters at the beginning of a sentence, a letter 'A' appears in a box directly below the selected character. The only way agree is to click on this box (deflectors, as my hands are on the keyboard when I change the text!) to insert it, and worse, the suggestion is a small cap that I would never in the middle of the body of the text.

  So, to avoid this terrible suggestion, I must firstly, press a key to get this box go away before pressing on "shift + A" typing my letter. Each. Time. I select a letter.

  This is beyond maddening! Yet another "feature" which is nothing more than get in the way. Please help me to turn it off.

  Preferences > advanced type

• In a single query SELECT top row?

  Hello

  Can someone help me write a query to get the first line after the clause order by using a single query only.
  Example:
  I can write after query to select the first line
  Select * from (select * from t by col1) where rownum = 1;

  But here I should not use view inline to get the result. Because my initial requirement must use this query in the selection list and he needs to use a column (of a table in the FROM clause) in which the query clause online. Because there are restrictions we cannot use the column (of a table in the FROM clause) more than one level of application online.

  Please help me.

  Used version of Oracle's Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

• difficulty using a secondary paragraph on a selection style

  I use paragraph styles in a publication any longer. I am trying to apply a secondary (chips) style to a selection within a body of text that has a style of primary already applied paragraph style.  Sometimes, it works very well, but sometimes when I apply the second style, all other paragraphs around this selection command and get involved. Why is this and how do I prevent it? Thank you, Clare

  A paragraph can only be tagged with the style of a paragraph. Some selected text it contains can be secondarily labeled with a character style. Make your newsletter to be its own paragraph style.

• TableView multiline cell

  How can I do with a custom TableCellFactory a TableCell multiline and do the Rowhight changed dynamics. Or how can I calculate the height of the multiline label? It still gives me 0.
  
  Edited by: 884604 the 12.09.2011 09:40

  Ok. This can be achieved by using the 'Text' node in the table cell. Please check the code below.

  TableColumn descCol = new TableColumn("Description");
  descCol.setPrefWidth(150);
  descCol.setCellValueFactory(new PropertyValueFactory("description"));
  Callback cellFactory = new Callback() {
       @Override
       public TableCell call( TableColumn param) {
            final TableCell cell = new TableCell() {
                 private Text text;
                 @Override
                 public void updateItem(Object item, boolean empty) {
                        super.updateItem(item, empty);
                        if (!isEmpty()) {
                          text= new Text(item.toString());
                          text.setWrappingWidth(140);
                             setGraphic(text);
                        }
                 }
            };
            return cell;
       }
  };
  descCol.setCellFactory(cellFactory);
  

  The important part is the width of the packaging for the text node.

  text.setWrappingWidth(140);
  

  Adjust the width of the package according to the width of your column.
  I hope it will be useful to you.
  Happy coding! :)